Wenxue Dong

Dr. Wenxue Dong


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 March 2024 in Agriculture
Verified
Journal Article
Open access
PDF file
WZWendong Zhong
Wendong Zhong
XZXuan Zhao
Xuan Zhao
FLFei Liu
Fei Liu
HBHongbin Bai
Hongbin Bai
WDWenxue Dong
Wenxue Dong
XKXiang Kong
Xiang Kong
This paper proposes a solution to the problem of tight population in the filling area of traditional air suction seed metering devices during quinoa sowing, which leads to inaccurate adsorption. The proposed method disperses the population into a stable seed flow and absorbs the seeds in a flow posture. The flow adsorption precision seed metering device is designed and improved, and the key structure parameters are optimized based on the shape and size parameters of quinoa seeds. A four-factor and three-level response surface orthogonal test is conducted using the Box–Behnken experimental design. The number of seeds, flow angle, negative pressure at the suction hole, and advancing speed are taken as experimental factors, and the qualified index of grain number per hole, qualified index of hole distance, and coefficient of variation of hole distance are used as evaluation indices. The results are optimized using extreme value theory, and it is found that when the seed amount is 5.82 mm, the flow angle is 31.08°, the negative pressure of the air chamber is 1.7 kPa, and the advancing speed is 3.82 km·h−1, and the qualified index of hole number is 94.37%, the qualified index of hole distance is 95.39%, and the coefficient of variation of hole distance is 4.51%. The results are in general agreement with the prediction through the bench validation test, which meets the requirements of quinoa seed metering devices.

11 March 2024 in Agriculture
Verified
Journal Article
Open access
PDF file
XYXu Yang
Xu Yang
YWYingsi Wu
Yingsi Wu
LWLihe Wang
Lihe Wang
FLFei Liu
Fei Liu
XZXuan Zhao
Xuan Zhao
YMYutao Ma
Yutao Ma
To address problems encountered in current potato harvesting machines, such as potato damage, poor adaptability, and low operational efficiency, a new towed potato picking and bagging machine (4UJ-180A) equipped with a soil-digging axis, flexible conveying device, and hydraulic control system was developed. The digging mechanism of the harvester can reduce soil blockage and minimize damage to potato skins. The rubber biomimetic finger can maintain stable transportation of potatoes and minimize collisions. The hydraulic control system, the buffering components, and the bagging device work together to flexibly and continuously collect potatoes, reducing skin damage during the harvesting process. Based on the structure of the whole machine, the harvesting process, and the working principle, the soil picking, lifting buffer, and potato collection process were analyzed. Theoretical calculations were used to determine the structure and operational parameters of the potato picking, lifting buffering, and bagging segments. An experiment utilizing the orthogonal method was conducted. The experiment consisted of three factors and three levels, with the test indicators being the potato skin damage rate, potato injury rate, loss rate, and impurity rate. The factors considered in the experiment were the forward speed, conveyor speed, and soil-digging shaft speed. Field experiments demonstrate that at a forward speed of 1 m/s, soil digging shaft speed of 35 rpm, and conveyor speed of 28 rpm, the rate of potato skin damage is 2.8%, the potato injury rate is 1.3%, the loss rate is 0.4%, and the impurity rate is 0.7%. These experiments verify that all indicators adhere to national industry standards, providing a valuable reference for equipment research, development, optimization, and improvement.

17 August 2024 in Agriculture
Verified
Journal Article
Open access
PDF file
XZXuan Zhao
Xuan Zhao
HBHongbin Bai
Hongbin Bai
FLFei Liu
Fei Liu
HBHongbin Bai
Hongbin Bai
WDWenxue Dong
Wenxue Dong
Quinoa and other small-seeded crops possess relatively diminutive seed diameters, rendering them highly susceptible to the influence of airflow. The seeding process is impacted by the Cluster Hole Effect, where seeds are unintentionally drawn into areas between the suction holes. This leads to multiple seeds being picked up at once, making it difficult to meet the precise seeding requirements for quinoa. To delve deeper into the mechanism of the cluster hole effects, this study focused on quinoa seeds as the primary research subject. This study analyzes the migration conditions of seed population suction and establishes an equation for seed suction considering the cluster hole effect. CFD methods were employed to analyze the impact of various vacuum chamber negative pressures, suction hole spacing, and suction hole quantities on the suction flow field. By combining simulation results with evaluation criteria such as the qualification rate of seeds per hole, the qualification rate of hole spacing, empty hole rate, and hole spacing coefficient of variation, single-factor experiments and Box–Behnken response surface experiments were conducted to analyze the effects of different factors and their interactions, ultimately determining an optimal parameter combination. The results indicate that with five suction holes, spaced at D11, a vacuum pressure of 1.2 kPa, and a rotation speed of 15 rpm, the seeding performance is optimal. The qualification rate of seeds per hole reaches 98.67%, the qualification rate of hole spacing is 96%, and the hole spacing coefficient of variation is 5.24%, meeting agricultural requirements.

21 August 2025 in Agriculture
Verified
Journal Article
Open access
PDF file
QWQihao Wan
Qihao Wan
WDWenxue Dong
Wenxue Dong
AZAnbin Zhang
Anbin Zhang
FLFei Liu
Fei Liu
YWYingsi Wu
Yingsi Wu
YRYuxing Ren
Yuxing Ren
Traditional fluted roller seed metering devices exhibit unstable seeding rates during forage seed mixed sowing. To address this issue, a new seed metering device was designed based on the agronomic requirements of forage seed mixing and the structural characteristics of fluted roller mechanisms. The discrete element method (DEM) was employed to numerically simulate the movement of particles within the seed metering device. Single-factor experiments identified optimal parameter ranges for the seed metering device: a metering shaft speed of 10–20 r/min, a seed inlet width of 8–24 mm, and a seed outlet height of 10–20 mm. A response surface methodology (RSM) experiment was then designed using Design-Expert 13 software. The results yielded optimal operating parameters: a metering shaft speed of 18.9 r/min, a seed inlet width of 9.3 mm, and a seed outlet height of 14.4 mm. The field experiment validated the seeding performance with the optimal parameter combination. The coefficient of variation (CV) for the first-class seed (CV1) was 4.16%, and for the second-class seed (CV2) it was 2.98%, both of which met the requirements for mixed sowing of forage.

17 October 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
QWQihao Wan
Qihao Wan
AZAnbin Zhang
Anbin Zhang
WDWenxue Dong
Wenxue Dong
FLFei Liu
Fei Liu
YWYingsi Wu
Yingsi Wu
YRYuxing Ren
Yuxing Ren
The study of Leymus chinensis seed cleaning has been hindered by the lack of accurate discrete-element contact parameters for seed–straw interactions, thereby limiting, to some extent, the optimization of cleaning equipment. To address this issue, the present study analyzed a mixture of L. chinensis seeds and straw, and determined their fundamental physical and contact parameters via laboratory experiments. The Hertz–Mindlin (no slip) discrete element simulation model was employed to calibrate the parameters of the seed–straw mixture. A Plackett–Burman test was used to identify key factors significantly affecting the repose angle, including the seed–seed static friction coefficient and the seed–straw static and dynamic friction coefficients. These factors’ optimal ranges were further refined using steepest ascent experiments. A Box–Behnken design was used to optimize contact parameters, resulting in the following values: a seed–seed static friction coefficient of 0.709, a seed–straw static friction coefficient of 0.281, and a seed–straw dynamic friction coefficient of 0.085. Validation experiments demonstrated an error of less than 2.14%, confirming the reliability of the calibrated parameters. This study offers a theoretical foundation for discrete element simulations in L. chinensis seed cleaning applications.