Ying-Hsun Hung

Dr. Ying-Hsun Hung

Department of Finance, Chaoyang, Taichung, Taiwan
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 January 2024 in Axioms
Verified
Journal Article
Open access
PDF file
You-Shyang ChenYou-Shyang Chen
You-Shyang Chen
Ying-Hsun HungYing-Hsun Hung
Ying-Hsun Hung
MLMike Yau-Jung Lee
Mike Yau-Jung Lee
CLChien-Jung Lai
Chien-Jung Lai
Jieh-Ren ChangJieh-Ren Chang
Jieh-Ren Chang
CCChih-Yao Chien
Chih-Yao Chien
With the vigorous development of emerging technology and the advent of the Internet generation, high-speed Internet and fast transmission 5G wireless networks contribute to interpersonal communication. Now, the Internet has become popular and widely available, and human life is inseparable from various experiences on the Internet. Many base stations and data centers have been established to convert and switch from electrical transmission to optical transmission; thus, it is entering the new era of optical fiber networks and optical communication technologies. For optical communication, the manufacturing of components for the purpose of high-speed networks is a key process, and the requirement for the stability of its production conditions is very strict. In particular, product yields are always low due to the restriction of high-precision specifications associated with the limitations of too many factors. Given these reasons, this study proposes a hybrid fuzzy control-based model for industry data applications to organize advanced techniques of box-and-whisker plot method, association rule, and decision trees to find out the determinants that affect the yield rate of products and then use the fuzzy control Proportional-Integral-Derivative (PID) method to manage the determinants. Since it is unrealistic to test the real machine online operation at the manufacturing stage, the simulation software supersedes this for improved results, and a mathematical neural network is used to verify the given data to confirm whether its result is similar to that of the simulation. The study suggests that excessive temperature differentials between substrate and cavity can lead to low yields. It suggests using fuzzy control technology for temperature management, which could increase yield, reduce labor costs, and accelerate the transition to high-speed networks by mass-producing high-precision optical filters.

14 February 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
You-Shyang ChenYou-Shyang Chen
You-Shyang Chen
CCChih-Lung Chou
Chih-Lung Chou
YLYu-Sheng Lin
Yu-Sheng Lin
Ying-Hsun HungYing-Hsun Hung
Ying-Hsun Hung
XCXuan-Han Chen
Xuan-Han Chen
Backup system work represents “the last mile” of information security (IS). To avoid data loss or damage, enterprises should execute data backup periodically to ensure the integrity and availability of such data. Additionally, due to the continuous emergence of IS incidents featuring malicious attacks in recent years, major firms in countries around the world have successively reported being under attack by ransomware viruses. In particular, small and medium enterprises (SMEs) became the potential targets of malicious attacks based on their different types of IS awareness and degrees of digitalization; therefore, IS work has become one of the essential topics with special significance for numerous SMEs. To this end, this paper studied the factors influencing SMEs’ adoption of IS backup systems in the hope that the critical decision-making behaviors of SMEs regarding the issue of IS could be learned. Practical suggestions can be made for the marketing schemes adopted by IS manufacturers concerning the planning of IS backup systems. Thus, this study used three methodological stages to address the exciting issue of IS backup systems for SMEs. In the first stage, 11 factors at two hierarchies involving three constructs influencing SMEs’ adoption of IS backup systems were summarized via a literature review. The constructs included financial consideration (FC), the IS incident, and business IS decision making (BISD-M). In the second stage, an expert questionnaire was applied; an advanced hybrid modified Delphi method (MDM) and analytic hierarchy process (AHP) with expert input were constructed to identify the sorting of overall weights based on the 11 factors included in the first stage. Following the empirical conclusions, the top three critical factors were “disaster loss amount”, “enterprise’s downtime”, and “supplier’s contractual requirements”. The conclusions of this study indicated that two factors were included in the FC construct; thus, the FC construct influenced IS the most, and the BISD-M construct took second place. In the final stage, through re-checking three actual cases, the results of this study were verified with specific respect to the FC. In conclusion, to popularize IS backup systems among SMEs and fully implement IS, manufacturers may start from the FC in the hope that the severe impact caused by IS incidents featuring malicious attacks can be slowed down and the losses encountered can be lowered. The empirical results and conclusions of this study can be used for reference by SMEs, and both theoretical and empirical foundations have been provided for further studies in academic circles; the results above also show a significant application contribution of this study.

21 October 2024 in Mathematics
Verified
Journal Article
Open access
PDF file
You-Shyang ChenYou-Shyang Chen
You-Shyang Chen
Ying-Hsun HungYing-Hsun Hung
Ying-Hsun Hung
MLMike Yau-Jung Lee
Mike Yau-Jung Lee
Jieh-Ren ChangJieh-Ren Chang
Jieh-Ren Chang
CLChien-Ku Lin
Chien-Ku Lin
TWTai-Wen Wang
Tai-Wen Wang
Cooling water towers are commonly used in industrial and commercial applications. Industrial sites frequently have harsh environments, with certain characteristics such as poor air quality, close proximity to the ocean, large quantities of dust, or water supplies with a high mineral content. In such environments, the quality of electrical conductivity in the cooling water towers can be significantly negatively affected. Once minerals (e.g., calcium and magnesium) form in the water, conductivity becomes too high, and cooling water towers can become easily clogged in a short time; this leads to a situation in which the cooling water host cannot be cooled, causing it to crash. This is a serious situation because manufacturing processes are then completely shut down, and production yield is thus severely reduced. To solve these problems, in this study, we develop a practical designation for a photovoltaic industry company called Company-L. Three control methods are proposed: the motor control method, the PID control method, and the fuzzy PID control method. These approaches are proposed as solutions for successfully controlling the forced replenishment and drainage of cooling water towers and controlling the opening of proportional control valves for water release; this will further dilute the electrical conductivity and control it, bringing it to 300 µS/cm. In the experimental processes, we first used practical data from Company-L for our case study. Second, from the experimental results of the proposed model for the motor control method, we can see that if electrical conductivity is out of control and the conductivity value exceeds 1000 µS/cm, the communication software LINE v8.5.0 (accessible via smartphone) displays a notification that the water quality of the cooling water towers requires attention. Third, although the PID control method is shown to have errors within an acceptable range, the proportional (P) controller must be precisely controlled; this control method has not yet reached this precise control in the present study. Finally, the fuzzy PID control method was found to have the greatest effect, with the lowest level of errors and the most accurate control. In conclusion, the present study proposes solutions to reduce the risk of ice-water host machines crashing; the solutions use fuzzy logic and can be used to ensure the smooth operation of manufacturing processes in industries. Practically, this study contributes an applicable technical innovation: the use of the fuzzy PID control model to control cooling water towers in industrial applications. Concurrently, we present a three-tier monitoring checkpoint that contributes to the PID control method.

6 July 2023 in Mathematics
Verified
Journal Article
Open access
PDF file
You-Shyang ChenYou-Shyang Chen
You-Shyang Chen
Ying-Hsun HungYing-Hsun Hung
Ying-Hsun Hung
YLYu-Sheng Lin
Yu-Sheng Lin
With the motivation of long-term care 2.0 plans, forecasting models to identify potential customers of long-term care insurance (LTCI) are an important and interesting issue. From the limited literature, most past researchers emphasize traditional statistics techniques to address this issue; however, these are lacking in some areas. For example, intelligent hybrid models for LTCI are lacking, performance measurement of components for hybrid models is lacking, and research results for interpretative capacities are lacking, resulting in a black box scenario and difficulty in making decisions, and the gap between identifying potential customers and constructing hybrid models is unbridged. To solve the shortcomings mentioned above, this study proposes some advanced intelligent single and hybrid models; the study object is LTCI customers. The proposed hybrid models were used on the experimental dataset collected from real insurance data and possess the following advantages: (1) The feature selection technique was used to simplify variables for the purpose of improving model performance. (2) The performance of hybrid models was evaluated against some machine learning methods, including rough set theory, decision trees, multilayer perceptron, support vector machine, genetic algorithm, random forest, logistic regression, and naive Bayes, and sensitivity analysis was performed in terms of accuracy, coverage, rules number, and standard deviation. (3) We used the C4.5 algorithm of decision trees and the LEM2 algorithm of rough sets to extract and provide valuably comprehensible decisional rules as decision-making references for the interested parties for their varied benefits. (4) We used post hoc testing to verify the significant difference in groups. Conclusively, this study effectively identifies potential customers for their key attributes and creates a decision rule set of knowledge for use as a reference when solving practical problems by forming a structured solution. This study is a new trial in the LTCI application field and realizes novel creative application values. Such a hybrid model is rarely seen in identifying LTCI potential customers; thus, the study has sufficient application contribution and managerial benefits to attract much concern from the interested parties.

23 September 2023 in Mathematics
Verified
Journal Article
Open access
PDF file
You-Shyang ChenYou-Shyang Chen
You-Shyang Chen
Ying-Hsun HungYing-Hsun Hung
Ying-Hsun Hung
YLYu-Sheng Lin
Yu-Sheng Lin
Jieh-Ren ChangJieh-Ren Chang
Jieh-Ren Chang
CLChi-Hsiang Lo
Chi-Hsiang Lo
HYHong-Kai You
Hong-Kai You
In recent years, the problem of potential-induced degradation (PID) phenomenon has been deeply associated with solar power issues because it causes serious power attenuation of solar panels and results in lowering its power generation efficiency. Thus, effectively identifying the PID problem from insights of industry data analysis to reduce production costs and increase the performance of power generation is an interesting and important subject for the solar power industry. Moreover, by the traditional standard rule (IEC62804) and the condition of a 96 h testing time, the costs of testing time and assembling materials against PID are very high and must be improved. Given the above reasons, this study proposes a hybrid procedure to organizes four mathematical methods: the mini-module testing, solar cell testing, a settling time, and a neural network, which are named as Method-1–Method-4, respectively, to efficiently solve the PID problem. Consequently, there are four key outcomes from the empirical results for solar power application: (1) In Method-1 with a 96 h testing time, it was found that the large module with higher costs and the mini module with lower costs have a positive correlation; thus, we can replace the large-module testing by the effective mini module for lower cost on module materials. (2) In Method-2 with a 24 h testing time, it was also found that the mini module and the solar cell are positively correlated; this result provides evidence that we can conduct the PID test by the easier solar cell to lower the costs. (3) In Method-3, the settling time achieves an average accuracy of 94% for PID prediction with a 14 h testing time. (4) In Method-4, the experimental result provides an accuracy of 80% when identifying the PID problem with the mathematical neural network model and are obtained within a 2 h testing time. From the above results, these methods succeed in reducing cost of materials and testing time during the manufacturing process; thus, this study has an industrial application value. Concurrently, Method-3 and Method-4 are rarely seen in the limited literature review for identifying PID problem; therefore, this study also offers a novel contribution for technical application innovation.

21 July 2023 in Mathematics
Verified
Journal Article
Open access
PDF file
You-Shyang ChenYou-Shyang Chen
You-Shyang Chen
Jieh-Ren ChangJieh-Ren Chang
Jieh-Ren Chang
Ying-Hsun HungYing-Hsun Hung
Ying-Hsun Hung
JLJia-Hsien Lai
Jia-Hsien Lai
Selective laser sintering (SLS) is one of the most popular 3D molding technologies; however, the manufacturing steps of SLS machines are cumbersome, and the most important step is focused on molding testing because it requires a lot of direct labor and material costs. This research establishes advanced hybrid mathematical classification models, including random forest (RF), support vector machine (SVM), and artificial neural network (ANN), for effectively identifying the SLS yield of the sintering results from three sintered objects (boxes, cylinders, and flats) to achieve the key purpose of reducing the number of model verification and machine parameter adjustments, thereby saving a lot of manufacturing time and costs. In the experimental process, performance evaluation indicators, such as classification accuracy (CA), area under the ROC curve (AUC), and F1-score, are used to measure the proposed models’ experience with practical industry data. In the experimental results, the ANN gets the highest 0.6168 of CA, and it is found that each machine reduces the average sintering time by four hours when compared with the original manufacturing process. Moreover, we employ an oversampling method to expand the sample data to overcome the existing problems of class imbalance in the dataset collected. An important finding is that the RF algorithm is more suitable for predicting the sintering failure of objects, and its average sintering times per machine are 1.7, which is lower than the 1.95 times of ANN and 2.25 times of SVM. Conclusively, this research yields some valuable empirical conclusions and core research findings. In terms of research contributions, the research results can be provided to relevant academic circles and industry requirements for referential use in follow-up studies or industrial applications.