The subject of radio wave propagation in tunnels has gathered attention in recent years, mainly regarding the fading phenomena caused by internal reflections. Several methods have been suggested to describe the propagation inside a tunnel. This work is based on the ray tracing approach, which is useful for structures where the dimensions are orders of magnitude larger than the transmission wavelength. Using image theory, we utilized a multi-ray model to reveal non-dimensional parameters, enabling measurements in down-scaled experiments. We present the results of field experiments in a small concrete pedestrian tunnel with smooth walls for radio frequencies (RF) of 1, 2.4, and 10 GHz, as well as in a down-scaled model, for which millimeter waves (MMWs) were used, to demonstrate the roles of the frequency, polarization, tunnel dimensions, and dielectric properties on the wave propagation. The ray tracing method correlated well with the experimental results measured in the tunnel as well as in a scale model.
We present a technique for the identification of human and animal movement and height using a low power millimeter-wave radar. The detection was based on the transmission of a continuous wave and heterodyning the received signal reflected from the target to obtain micro-Doppler shifts associated with the target structure and motion. The algorithm enabled the extraction of target signatures from typical gestures and differentiated between humans, animals, and other ‘still’ objects. Analytical expressions were derived using a pendulum model to characterize the micro-Doppler frequency shifts due to the periodic motion of the human and animal limbs. The algorithm was demonstrated using millimeter-wave radar operating in the W-band. We employed a time–frequency distribution to analyze the detected signal and classify the type of targets.
This study presents a reliable classification of walking pedestrians and animals using a radar operating in the millimeter waves (mmW) regime. In addition to the defined targets, additional targets were added in an attempt to fool the radar and to present the robustness of the proposed technique. In addition to the classification capabilities, the presented scheme allowed for the ability to detect the range of targets. The classification was achieved using a deep neural network (DNN) architecture, which received the recordings from the radar as an input after the pre-processing procedure. Qualitative detection was made possible due to the radar’s operation at extremely high frequencies so that even the tiny movements of limbs influenced the detection, thus enabling the high-quality classification of various targets. The classification results presented a high achievable accuracy even in the case where the targets attempted to fool the radar and mimicked other targets. The combination of the use of high frequencies alongside neural-network-based classification demonstrated the superiority of the proposed scheme in this research over the state of the art. The neural network was analyzed with the help of interpretable tools such as explainable AI (XAI) to achieve a better understanding of the DNN’s decision-making process and the mechanisms via which it was able to perform multiple tasks at once.
In this study, we present a novel approach for the real-time detection of high-speed moving objects with rapidly changing velocities using a high-resolution millimeter-wave (MMW) radar operating at 94 GHz in the W-band. Our detection methodology leverages continuous wave transmission and heterodyning of the reflected signal from the moving target, enabling the extraction of motion-related attributes such as velocity, position, and physical characteristics of the object. The use of a 94 GHz carrier frequency allows for high-resolution velocity detection with a velocity resolution of 6.38 m/s, achieved using a short integration time of 0.25 ms. This high-frequency operation also results in minimal atmospheric absorption, further enhancing the efficiency and effectiveness of the detection process. The proposed system utilizes cost-effective and less complex equipment, including compact antennas, made possible by the low sampling rate required for processing the intermediate frequency signal. The experimental results demonstrate the successful detection and characterization of high-speed moving objects with high acceleration rates, highlighting the potential of this approach for various scientific, industrial, and safety applications, particularly those involving targets with rapidly changing velocities. The detailed analysis of the micro-Doppler signatures associated with these objects provides valuable insights into their unique motion dynamics, paving the way for improved tracking and classification algorithms in fields such as aerospace research, meteorology, and collision avoidance systems.
In this study, we propose a range detection (RD) ability by a continuous wave (CW) bistatic Doppler radar (RDCWB) of small and fast targets with very high range resolution. The target’s range and velocity are detected simultaneously. The scheme is based on the transmission of a continuous wave (CW) at millimeter wavelength (MMW) and the measurement of the respective Doppler shifts associated with target movements in different directions. The range resolution in this method is determined by the Doppler resolution only, without the necessity to transmit the modulated waveforms as in frequency modulation continuous wave (FMCW) or pulse radars. As the Doppler resolution in CW depends only on the time window required for processing, a very highrange resolution can be obtained. Most other systems that perform target localization use the transmission of wide-band waveforms while measuring the delay of the received signal scattered from the target. In the proposed scheme, the range resolution depends on the processed integration time of the detected signal and the velocity of the target. The transmission is performed from separated antennas and received by a single antenna. The received signal is heterodyned with a sample of the transmitted signal in order to obtain the Doppler shifts associated with the target’s movement. As in a multi-in multi-out (MIMO) configuration, the presented scheme allows for the accumulation of additional information for target classification. Data on the target’s velocity, distance, direction, and instantaneous velocity can be extracted. Using digital processing, with the additional information obtained by analyzing the difference between the resulting intermediate frequencies caused by the Doppler effect, it is possible to calculate the distance between the radar and the target at high resolution in real-time. The presented method, which was tested experimentally, proved to be highly effective, as only one receiver is required for the detection, while the transmission is carried out using a fixed, single-frequency transmission.
Small targets with low radar cross-section (RCS) and high velocities are very hard to track by radar as long as the frequent variations in speed and location demand shorten the integration temporal window. In this paper, we propose a technique for tracking evasive targets using a continuous wave (CW) radar array of multiple transmitters operating in the millimeter wavelength (MMW). The scheme is demonstrated to detect supersonic moving objects, such as rifle projectiles, with extremely short integration times while utilizing an adaptive processing algorithm of the received signal. Operation at extremely high frequencies qualifies spatial discrimination, leading to resolution improvement over radars operating in commonly used lower frequencies. CW transmissions result in efficient average power utilization and consumption of narrow bandwidths. It is shown that although CW radars are not naturally designed to estimate distances, the array arrangement can track the instantaneous location and velocity of even supersonic targets. Since a CW radar measures the target velocity via the Doppler frequency shift, it is resistant to the detection of undesired immovable objects in multi-scattering scenarios; thus, the tracking ability is not impaired in a stationary, cluttered environment. Using the presented radar scheme is shown to enable the processing of extremely weak signals that are reflected from objects with a low RCS. In the presented approach, the significant improvement in resolution is beneficial for the reduction in the required detection time. In addition, in relation to reducing the target recording time for processing, the presented scheme stimulates the detection and tracking of objects that make frequent changes in their velocity and position.