To explore the bolt-grouting method of the deep roadway under three-dimensional unequal ground stress, a unidirectional coupling model of surrounding rock plastic failure and grouting diffusion considering the influence of excavation disturbance stress was established. Spatial evolution characteristics of plastic failure and grouting diffusion, and the impact of the spacing and row spacing of grouting bolts/cables on grout diffusion, were simulated by using the numerical method. The results revealed that the horizontal ground stress perpendicular to the axial direction of the roadway was the main factor inducing roadway damage. Moreover, the more significant the difference of the ground stress in three directions, the larger the plastic zone of the roof corner and floor corner of the roadway. Under different lateral pressure coefficients, the grout diffused can be approximate ellipsoid and cylinders. Furthermore, the larger the ratio of lateral pressure coefficients perpendicular to and parallel to the axial direction of roadway, the larger the diffusion length of grout in each spatial direction in the surrounding rock. In bolt-grouting support, the length of the grouting bolts/cables should be greater than the plastic zone of the surrounding rock, and the optimal relationship between their spacing and row spacing and diffusion length of grout is determined. The research results were applied in the bolt-grouting engineering for the three-level main roadway in the Haizi Coal Mine, and a good support effect was achieved. This can provide technical guidance and a method of reference for the design and parameter optimization of bolt-grouting support for roadways under deep high ground stress.
In order to explore the effective support method for deep broken roadway, based on the in situ stress test results, the analytical and numerical solutions of the stress and the range of plastic failure zone (PFZ) in a circular roadway subjected to non-uniform loads were obtained using analytical and finite difference numerical methods based on the elastoplastic theory, respectively. Their comparison results show that the analytical and numerical methods are correct and reasonable. Furthermore, the high geostress causes the stress and range of PFZ in roadway roof and floor to increase sharply while those in roadway ribs decrease. Moreover, the greater the difference of horizontal geostress in different horizontal directions is, the larger the range of PFZ in roadway roof and floor is. The shape of PFZ in roadway varies with the ratio of horizontal lateral pressure coefficient in x-direction and y-direction. Finally, according to the distribution characteristics of PFZ and range of PFZ under the non-uniformly high geostress, this paper has proposed a combined support scheme, and refined and optimized supporting parameters. The field monitoring results prove that the roadway deformation and fracture have been effectively controlled. The research results of this paper can provide theoretical foundation as well as technical reference for the stability control of deep broken roadway under non-uniformly high geostress.
To reveal the strengthening mechanism and re-failure mechanism of grouting on fractured rock, the variable-angle shear tests, real-time acoustic emission (AE) tests and VIC-3D (non-contact full field strain measurement system) tests were carried out on intact red sandstone (IRS) and grouting-reinforced body of fractured red sandstone (GRBFRS). The results show that the peak shear strength of IRS and GRBFRS decreases with the increase of shear angle. Grouting reinforcement mainly increases the cohesion of GRBFRS to improve its shear strength, but its reconstructability decreases with the increase of shear angle. In the whole process of shear deformation, the shear micro damage and shear fracture of GRBFRS are more than those of IRS. Although the shear re-failure before and after the peak stress stage is the most notable, its intensity or degree is reduced. When the shear angle is 45°, both IRS and GRBFRS undergo shear-splitting failure. However, when the shear angle is large, the IRS and GRBFRS only occurs shear failure. Moreover, the larger the shear angle, the more likely IRS and GRBFRS is to produce secondary shear cracks. The low strength of the rock–grout interface in GRBFRS is the main inducer of shear re-failure.