Yeldos Nugumarov

Mr. Yeldos Nugumarov

Satbayev University, Almaty, Kazakhstan
orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 March 2026 in Energies
Verified
Journal Article
Open access
PDF file
RBRyskol Bayamirova
Ryskol Bayamirova
ATAliya Rizabekovna Togasheva
Aliya Rizabekovna Togasheva
Danabek S SaduakassovDanabek S Saduakassov
Danabek S Saduakassov
AZAkshyryn Zholbassarova
Akshyryn Zholbassarova
MTMaxat Tabylganov
Maxat Tabylganov
Yeldos NugumarovYeldos Nugumarov
Yeldos Nugumarov
This study is devoted to a comparative analysis of modern methods for determining the wax crystallization onset temperature (WCOT) of high-paraffin crude oil from the Uzen field. The objects of investigation were crude oil samples from the 13th reservoir horizon with a paraffin mass content ranging from 22.5% to 27.5%. For the first time in the practice of the oil and gas industry of Kazakhstan, a comprehensive comparison of results obtained using two fundamentally different approaches was performed: the light transmittance method using the KING-UNNP-70 apparatus, which simulates reservoir conditions (pressure of 12 MPa), and a dynamic method using a Wax Flow Loop facility, which reproduces crude oil flow in a pipeline. The experimental results showed that the light transmittance method detects the appearance of the first microcrystals at temperatures of 38.0–41.7 °C, whereas the dynamic method yields higher WCOT values, ranging from 41.0 °C to 44.0 °C. It was also found that the temperature of bulk crystallization, characterizing intensive solid phase formation, lies within the range of 33.5–35.0 °C. The results confirm that under flow conditions, paraffin crystallization begins at higher temperatures compared to static conditions, which is of critical importance for the design of crude oil gathering and transportation systems. The obtained data allow more accurate prediction of the risks of asphaltene–resin–paraffin deposits (ARPD) formation and optimization of technological operating conditions of wells at the late stage of field development.
1

25 June 2026 in Neft i Gaz
Verified
Journal Article
Closed access
NNN.ZH. Nurlybai
N.ZH. Nurlybai
AZA.T. Zholbasarova
A.T. Zholbasarova
ATAliya Rizabekovna Togasheva
Aliya Rizabekovna Togasheva
RBR.U. Bayamirova
R.U. Bayamirova
Yeldos NugumarovYeldos Nugumarov
Yeldos Nugumarov
The paper presents the results of a study of the conditions of formation of asphalt-resin-paraffin deposits (AFS) in the reservoir oil of the Uzen deposit using the example of the Yu-13 horizon. The studies were performed using PVT analysis with an acoustic resonance system (ARS), as well as the "cold rod" method. The temperature ranges of the onset of crystallization of paraffins, the formation of zones of mass crystallization and complete solidification of oil have been established. It is shown that the temperature of the beginning of crystallization of paraffins is comparable to the current reservoir temperature, which causes a high probability of precipitation of the solid phase in the reservoir and the bottomhole zone. It is revealed that the determining factor of paraffin formation is the temperature regime, while the influence of dissolved gas is of secondary importance. The results obtained can be used to substantiate technological solutions to prevent and reduce the intensity of AFS at the Uzen field.

17 April 2026 in Eng
Verified
Journal Article
Open access
PDF file
ATAliya Rizabekovna Togasheva
Aliya Rizabekovna Togasheva
RBRyskol Bayamirova
Ryskol Bayamirova
Danabek S SaduakassovDanabek S Saduakassov
Danabek S Saduakassov
AZAkshyryn Zholbassarova
Akshyryn Zholbassarova
NNNurzhaina Nurlybai
Nurzhaina Nurlybai
Yeldos NugumarovYeldos Nugumarov
Yeldos Nugumarov
This study presents a risk assessment of asphaltene–resin–paraffin deposition (ARPD) in the producing formations of the XIII reservoir unit of the Uzen oil field at a late stage of development. The crude oil is characterized by an extremely high paraffin (wax) content of up to 29 wt.%. Long-term operation of the reservoir pressure maintenance (RPM) system with cold water injection has resulted in significant reservoir cooling, with temperatures declining from the initial 60–65 °C to 20–30 °C in zones of intensive waterflooding. To refine the critical phase transition temperatures of paraffin components, a dynamic laboratory approach was applied using a Wax Flow Loop system, which simulates wax deposition processes under flowing conditions. The results indicate that the wax appearance temperature (WAT) ranges from 41.0 to 44.0 °C, significantly exceeding the current bottomhole temperatures in the cooled zones of the reservoir. Intensive bulk crystallization of paraffins occurs within the temperature interval of 33.5–35.0 °C, while loss of oil flowability is observed at 25–34 °C, corresponding to the gelation and structural network formation of wax crystals under reduced thermal conditions. The obtained results confirm the inevitability of bulk oil structuring and solid wax phase precipitation directly within the reservoir porous medium. This process leads to blockage of low-permeability interlayers, deterioration of filtration properties, and a reduction in the displacement efficiency factor by 20–35%. Under the current thermal regime, ARPD should therefore be considered not merely as an operational flow assurance issue, but as a systemic factor limiting reservoir development efficiency. The research results substantiate the need to transition from reactive ARPD removal methods to proactive management of the thermal regime of the reservoir and wells, as well as to the differentiated application of thermal and chemical treatment methods.
1