Danabek S Saduakassov

Dr. Danabek S Saduakassov

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2024 in SOCAR Proceedings
Verified
Journal Article
Closed access
AZA. T. Zholbassarova
A. T. Zholbassarova
RBR. Y. Bayamirova
R. Y. Bayamirova
BRB. T. Ratov
B. T. Ratov
Danabek S SaduakassovDanabek S Saduakassov
Danabek S Saduakassov
This article focuses on the issue of enhancing oil production by eliminating asphalt, resin, and paraffin deposits (ARPD). These deposits pose significant challenges, including equipment clogging, reduced well productivity, and increased maintenance costs. Moreover, paraffin deposits can damage well equipment, cause accidents, and halt hydrocarbon production. The study involved laboratory and field experiments at the Uzen field to evaluate the efficiency of removing and dissolving paraffin using an emulsion composed of gas gasoline and nitrite compound solutions. Previous studies conducted at NGDU Uzenneft were critically analyzed for comparison. The scientific innovation of this research lies in the development of an emulsion based on gas gasoline and nitrite compound solutions to remove ARPD. The composition was designed to exclude highly aggressive components. It utilized a previously developed emulsion base and incorporated ammonium nitrite, slightly acidified with hydrogen chloride (0.1% by mass), to promote an exothermic reaction.The effectiveness of this technology was measured by changes in daily oil production rates, the duration of the treatment's effect, and changes in the well productivity coefficient before and after treatment.Results indicate that the developed technology successfully removed paraffin from the bottomhole zone of oil wells and increased oil production in 5 out of 6 wells at the Uzen field. The positive effect lasted 17-27 days, with oil inflow increasing by 17-174%. This led to a total additional oil production of 1528 tons from the five wells. Keywords: bottomhole formation zone; asphalt-resin-paraffin deposits; nitrite composition; surfactants; enhanced oil recovery.

4 September 2025 in Energies
Verified
Journal Article
Open access
PDF file
Valery MeshalkinValery Meshalkin
Valery Meshalkin
RARustem Asadullin
Rustem Asadullin
SVSergey Vezhnin
Sergey Vezhnin
Alexander VoloshinAlexander Voloshin
Alexander Voloshin
RGRida Gallyamova Gallyamova
Rida Gallyamova Gallyamova
RYRavil Yakubov
Ravil Yakubov
Well-killing operations in water-sensitive hydrophilic formations are often complicated by extended well clean-up periods and, in some cases, failure to restore the well’s production potential post-kill. Typical development targets exhibiting these properties include the Neocomian and Jurassic deposits of fields in Western Siberia and Western Kazakhstan. This paper proposes a well-killing method incorporating simultaneous near-wellbore treatment. In cases where heavy oil components (asphaltenes, resins, or paraffins) are deposited in the near-wellbore zone, their removal with a solvent results in post-operation flow rates that exceed pre-restoration levels. For wells not affected by asphaltene, resin, and paraffin deposits, killing is performed using a blocking pill of invert emulsion stabilized with an emulsifier and hydrophobic nanosilica. During filtration into the formation, this emulsion does not break but rather reforms according to the pore throat sizes. Flow rates in such wells typically match pre-restoration levels. The described engineering solution proves less effective when the well fluid water cut exceeds 60%. For wells exhibiting premature water breakthrough that have not yet produced their estimated oil volume, the water source is identified, and water shutoff operations are conducted. This involves polymer-gel systems crosslinked with resorcinol and paraform, reinforced with inorganic components such as chrysotile microdispersions, micro- and nanodispersions of shungite mineral, and gas black. Oscillation testing identified the optimal additive concentration range of 0.6–0.7 wt%, resulting in a complex modulus increase of up to 25.7%. The most effective polymer-inorganic composite developed by us, incorporating gas black, demonstrates high water shutoff capability (residual resistance factor ranges from 12.5 to 65.0 units within the permeability interval of 151.7 to 10.5 mD). Furthermore, the developed composites exhibit the ability to selectively reduce water permeability disproportionately more than oil permeability. Filtration tests confirmed that the residual permeability to oil after placing the blocking composition with graphene is 6.75 times higher than that to water. Consequently, such treatments reduce the well water cut. Field trials confirmed the effectiveness of the developed polymer-inorganic composite systems.

16 May 2025 in Processes
Verified
Journal Article
Open access
PDF file
RBRyskol Bayamirova
Ryskol Bayamirova
ATAliya Rizabekovna Togasheva
Aliya Rizabekovna Togasheva
Danabek S SaduakassovDanabek S Saduakassov
Danabek S Saduakassov
AZAkshyryn Zholbassarova
Akshyryn Zholbassarova
MTMaxat Tabylganov
Maxat Tabylganov
SNShyngys Nugumarov
Shyngys Nugumarov
The study aims to improve the efficiency of oil field development at the Kalamkas field through the implementation of new methods for analyzing hydrodynamic survey data and monitoring well conditions. It is hypothesized that the use of integrated geophysical and hydrodynamic methods will enhance forecasting accuracy, optimize field operations, and increase the hydrocarbon recovery factor. An integrated approach combining pulsed neutron logging (PNL), acoustic cementometry (AC), inflow and injectivity profile evaluation methods, and specialized software for advanced data interpretation was applied, significantly improving the accuracy of well condition analysis. The analysis enabled the identification of oil and gas saturation intervals, zones of increased water cut, and cementing defects in casing, and allowed for a quantitative assessment of reservoir permeability dynamics. Hydraulic fracturing application resulted in a 10–15% increase in permeability in certain zones, with an average oil recovery factor increase of 5%. Analysis of PNL data demonstrated the transition of oil-saturated reservoirs to water saturation during development, confirmed by geophysical and pressure build-up survey results. The study identified the primary causes of increased water cut and key factors leading to production rate decline. Proposed measures for optimizing operating modes and well grid efficiency contribute to improving existing field management practices.

5 March 2026 in Energies
Verified
Journal Article
Open access
PDF file
RBRyskol Bayamirova
Ryskol Bayamirova
ATAliya Rizabekovna Togasheva
Aliya Rizabekovna Togasheva
Danabek S SaduakassovDanabek S Saduakassov
Danabek S Saduakassov
AZAkshyryn Zholbassarova
Akshyryn Zholbassarova
MTMaxat Tabylganov
Maxat Tabylganov
Yeldos NugumarovYeldos Nugumarov
Yeldos Nugumarov
This study is devoted to a comparative analysis of modern methods for determining the wax crystallization onset temperature (WCOT) of high-paraffin crude oil from the Uzen field. The objects of investigation were crude oil samples from the 13th reservoir horizon with a paraffin mass content ranging from 22.5% to 27.5%. For the first time in the practice of the oil and gas industry of Kazakhstan, a comprehensive comparison of results obtained using two fundamentally different approaches was performed: the light transmittance method using the KING-UNNP-70 apparatus, which simulates reservoir conditions (pressure of 12 MPa), and a dynamic method using a Wax Flow Loop facility, which reproduces crude oil flow in a pipeline. The experimental results showed that the light transmittance method detects the appearance of the first microcrystals at temperatures of 38.0–41.7 °C, whereas the dynamic method yields higher WCOT values, ranging from 41.0 °C to 44.0 °C. It was also found that the temperature of bulk crystallization, characterizing intensive solid phase formation, lies within the range of 33.5–35.0 °C. The results confirm that under flow conditions, paraffin crystallization begins at higher temperatures compared to static conditions, which is of critical importance for the design of crude oil gathering and transportation systems. The obtained data allow more accurate prediction of the risks of asphaltene–resin–paraffin deposits (ARPD) formation and optimization of technological operating conditions of wells at the late stage of field development.
1

15 November 2024
Verified
Conference Paper
Closed access
AZAkshyryn Zholbassarova
Akshyryn Zholbassarova
Danabek S SaduakassovDanabek S Saduakassov
Danabek S Saduakassov
ATAliya Togasheva
Aliya Togasheva
MTMaxat Tabylganov
Maxat Tabylganov
AGAigul Gusmanova
Aigul Gusmanova
In this article, a theoretical and experimental study of the processes of embedding the centralizer bars on the walls of the well during drilling is carried out. For this purpose, a mathematical model has been created that describes the dynamics of the process, taking into account the axial load on the bit and the own weight of the drilling column. The formation of a compacted core in front of the centralizer, as well as the stress-strain state of the medium, is considered. The proposed approach allows us to take into account the possibility of introducing a centralizer on the walls of the well and adjust the curvature parameters of the trunk of inclined wells. The results of this study can be useful for optimizing the drilling process and improving the efficiency of wells. The study is aimed at analyzing the technical and economic aspects of the installation of inclined wells, based on the state of spatial curvature of the trunk. It was found that stabilization of the design azimuth of the curvature is a difficult task in deep inclined wells due to the lack of continuous information about the course of the curvature parameters. Technological problems such as measurement inaccuracy and selection of equipment parameters are described. Special attention is paid to the use of a magnetic translator and a downhole inclinometer to accurately orient the deflector at the bottom of the well, which is the most accurate and cost-effective method in modern drilling operations.

6 August 2026 in Management Systems in Production Engineering
Verified
Journal Article
Open access
PDF file
ABALIYA BAKIYEVA
ALIYA BAKIYEVA
Danabek S SaduakassovDanabek S Saduakassov
Danabek S Saduakassov
TTTabylganov Maksat Toksanovich
Tabylganov Maksat Toksanovich
MTMukhambetov Bolat Turalyuly
Mukhambetov Bolat Turalyuly
YAYerbolat Ayapbergenov
Yerbolat Ayapbergenov
In the absence of a reservoir pressure maintenance (RPM) system at Field X, a critical increase in water cut to 92.6% has been observed, with current production at 72.4% of the initial recoverable oil reserves. Such a high water cut at a stage that does not correspond to full production suggests the presence of atypical mechanisms. This study aimed to comprehensively analyze the causes of the abnormal water cut using modern diagnostic methods, including geophysical well logging (GWL), reservoir pressure monitoring, hydrogeochemical analysis of associated waters and detailed laboratory studies of core samples. The analysis revealed that the primary cause is a man-made breach in the production column of Well #4, resulting in the overflow of highly mineralized water from the overlying Albian-Cenomanian aquifer into the productive J-XI formation. Petrophysical studies revealed high reservoir heterogeneity. However, the oil displacement coefficient by water was 0.53 for highly permeable formations, ruling out low oil recovery as the main cause of water flooding. Key evidence of the human-made nature of the problem includes the abnormal increase in reservoir pressure, from 23.9 MPa in 2022 to 25.5 MPa in 2023, as well as the presence of sulphate ions in the production water, which is characteristic of the Albian-Cenomanian complex. A set of practical recommendations has been developed, including the urgent repair and insulation of Well #4, the introduction of a casing integrity monitoring system and the adaptation of the development strategy. The results emphasize the importance of monitoring the technical condition of the well fleet to ensure the effective late-stage development of similar fields. The study demonstrates that integrating this diagnostic methodology into a production management system enables proactive risk mitigation, supports decision-making for well intervention, and contributes to optimizing the overall production strategy in mature fields.