Piezoelectric fans have started to play an essential role in small-scale heat removal applications in recent years due to their high reliability and efficiency. In this study, an experimental study on the flow field characteristics produced by an oscillating piezoelectric fan at various Reynolds numbers (140 < Re < 550) in a quiescent air environment is investigated. Time resolved particle image velocimetry (PIV) measurements are performed for the flow field visualization. The flow pattern generated by the oscillating fan blade in the longitudinal plane changes as the Reynolds number increases. The ratio between the trailing edge velocity and side edge velocity increases as the Reynolds number increases. As a result, the trailing edge plays a more important role in driving fluid at a higher Reynolds number. Multiple vortexes are shed from the trailing edge during one oscillation cycle and is observed only at a high Reynolds number. This vortex shedding increases the unsteadiness of velocity field significantly, resulting in a turbulence intensity level beyond 100%. This result implies that turbulence models used in numerical studies need to be carefully validated as some might struggle at this highly turbulent flow regime.
9 August 2025 in International Journal of Heat and Mass Transfer
Two-phase heat transfer is essential for cooling high-power electronics, artificial intelligence (AI) data centers, deployable nuclear microreactors, aerospace platforms, and next-generation energy systems dissipating orders of magnitude higher heat fluxes than conventional hardware. As these systems grow more compact, they demand surfaces that transfer heat efficiently yet remain inexpensive to manufacture at scale. Micro- and nanostructured surfaces deliver large boiling enhancements, but translation beyond laboratory-scale planar geometries is limited by complex fabrication routes. Here, correlated diffraction, spectroscopy, and pulse etching elucidate the etchant-metallurgy coupling: chemistry dictates the rate-controlling regime, while grain boundaries and crystallographic texture govern recession kinetics. Guided by these mechanics rather than empiricism, we developed two low-cost etching protocols to carve hierarchical micro/nanostructures into industrial copper geometries (tubes and channels). These architectures enhance heat transfer coefficients by up to 234% with negligible pressure-drop penalties. High-speed imaging and mercury intrusion porosimetry attribute these gains to optimally sized nucleation cavities. Concurrently, pressure-drop signatures resolve distinct flow regimes, establishing the hydrodynamic response as an underexploited diagnostic tool. Together, these results carry nanoscale metallurgical insight to system-level performance, bridging laboratory enhancement and scalable manufacturing.
Increasing global energy demand is driving the need for efficient heat dissipation techniques, especially for high heat flux applications such as electronics thermal management. Boiling heat transfer has emerged as a promising heat acquisition solution due to its ability to utilize the latent heat of vaporization during liquid-to-vapor phase transformation. However, the thermal performance of conventional plain or finned surfaces can be limited due to low nucleation site density and poor fluid wickability, which are crucial for efficient boiling heat transfer and high critical heat flux (CHF). Unlike their macroscale (> 200 μm length scales) fin counterparts, micro- and nanostructured surfaces, herein termed structured surfaces, have become a promising alternative to overcome these barriers. The selection of appropriate structured surface fabrication techniques is essential to achieve the desired surface topography, cavity size range, and enhanced boiling performance. In this review, we provide a comprehensive analysis of structured surface fabrication strategies for boiling heat transfer enhancement. We broadly classify the methods into two groups: subtractive methods such as etching and laser ablation, and additive methods such as electrochemical deposition, sintering, and coating. The effect of manufacturing process parameters on surface characteristics is discussed in detail for each fabrication technique. We present how these engineered surfaces affect boiling performance and discuss the underlying mechanisms of heat transfer coefficient (HTC) and CHF enhancement in pool and flow boiling. A comparative evaluation of the fabrication methods is provided in terms of their advantages, limitations, and effectiveness in enhancing HTC and CHF. The key challenges associated with translating lab-scale to real-life boiling applications such as scalability, long-term durability and environmental impact of the fabrication methods are critically analyzed. Finally, we propose future directions for further advancement in the field. This review aims to serve as a guideline for structured surface design for high performance and energy efficient thermal systems.