Superhydrophobicity is a remarkable adaptation observed in various natural surfaces, which can potentially play a crucial role in the efficient functioning of numerous applications. The attainment of long-lasting or “durable” superhydrophobicity has significant implications for global energy production, water conservation, and the overall carbon footprint of industrialized and developing nations. Many applications requiring superhydrophobicity have been limited to laboratory scale experiments due to poor durability. In this article, we discuss important recent advancements and challenges to the development of durable superhydrophobic surfaces, including scalable fabrication, efficacy with low surface tension fluids, and the absence of standardized durability testing methods. To help address these challenges that hinder the implementation of superhydrophobicity, we conclude the article by providing a roadmap that outlines the crucial areas where the community should focus its research and development efforts, both from a fundamental and applied perspective.
2 December 2023 in International Journal of Heat and Mass Transfer
The presence of non-condensable gases (NCGs) can significantly affect condensation heat transfer by creating a vapor-diffusion barrier near the condensing surface. While quantitative analysis of condensation heat transfer with steam-NCG mixtures has been studied at higher NCG concentrations, few have investigated condensation mechanisms at low (sub-atmospheric) steam pressures with trace NCG levels (mass fractions below 0.1%). In this work, we study dropwise condensation at absolute steam pressures below 12 kPa and demonstrate that even minute NCG concentrations in the steam, below 20 parts per million by mass (ppm), can still significantly degrade heat transfer. Although enhanced degassing procedures can initially reduce NCG levels and improve heat transfer, they are wholly insufficient to sustain measurement accuracy over time due to the inexorable buildup of NCGs near the condensing surface. To address this challenge, we introduce an active venting strategy that continuously removes NCGs from the vicinity of the condensing surface. Experimental results show that this strategy can sustain higher HTCs by increasing flow velocity to promote the more effective removal of NCGs. This approach provides a practical and scalable method to mitigate measurement error due to NCG accumulation in condensation heat transfer studies, supporting efforts toward standardized testing for accurate results, as well as contributing to a better understanding of steam condensation mechanisms.
Heat exchangers play a key role in the functioning of industry. Improving the thermal-hydraulic effectiveness of heat exchangers is essential for optimizing energy efficiency. This study develops a passive method to enhance stainless steel heat exchanger performance using a highly scalable surface modification technique through static chemical etching with a chloride-rich custom-formulated etchant solution. The etching process chemically modifies the surface via Cl− and H+-induced passive film breakdown, Fe3+-driven oxidation, and Cu removal, leading to exposed metallic Fe and Cr and the formation of micro/nanoscale surface structures. Thorough analysis of etching reaction mechanisms and the resultant microstructures are obtained by quantifying micro and nanostructured surface morphologies using scanning electron microscopy, and focused ion beam sectioning. Additionally, X-ray diffraction, X-ray photoelectron spectroscopy, and energy-dispersive X-ray spectroscopy were performed to evaluate the surface chemistry prior to and after etching. Evaporation tests were performed on unetched and etched Cu-brazed stainless steel 304 plate heat exchangers, having surface roughness values of 0.8 μm and 5.2 μm, respectively. Flow boiling experiments with R-134a refrigerant revealed that the etched heat exchangers achieved a 54% enhancement in flow boiling heat transfer coefficient compared to their unetched counterparts, particularly at low vapor qualities. The improvement is attributed to an increased density of nucleation sites on the etched surface, which facilitates more frequent and smaller bubble formation, thereby enhancing nucleate boiling. These findings highlight the effectiveness of chemical etching as a scalable, rapid, and low-cost surface modification method for advanced manufacturing of next generation heat exchangers.