It is crucial to precisely calculate temperature utilizing thermal models, which require the determination of thermal parameters that optimally align model outcomes with experimental data. In many instances, the refinement of these models is undertaken within space instruments. This paper introduces an optimization methodology for thermal network models, with the objective of enhancing the accuracy of temperature predictions for aerial cameras. The investigation of internal convective heat transfer coefficients for both cylindrical and planar structures provides an estimation of convective thermal parameters. Based on the identification of thermally sensitive parameters and the reliability evaluation of transient temperature data through the Monte-Carlo simulation, the genetic algorithm is employed to search for global optimal parameter values that minimize the root mean square error (RMSE) between calculated and measured node temperatures. As a result, the optimized model shows significantly improved accuracy in temperature prediction, attaining an RMSE of 1.07 ℃ and reducing the maximum relative error between predicted and experimental results from 33.8 to 3.1%. Furthermore, the flight simulation and thermal control experiments validate the robustness of the optimized model, demonstrating that discrepancies between the observed and predicted temperatures are within 2 °C after re-correcting the external convection heat transfer coefficient value.
Scanning mirrors appear to be key components in optoelectronic systems for line-of-sight (LOS) stabilization. For improving the angular accuracy of a scanning mirror based on the eddy current displacement sensor measurement, an angular error-correction method is proposed and demonstrated. A mathematic angular error model with physical parameters was developed, and the cross-validation method was employed to determine the reasonable order of the Maclaurin series used in the error model, which increased the exactitude and robustness of the correction method. The error parameters were identified by accurately fitting the calibrated angular errors with the error model, which showed excellent error prediction performance. Based on the angular calculation model corrected by the error model, the closed-loop control system was established to obtain accurate deflection angles. Experimental results show that within the deflection angle of ±1.5 deg, the angular accuracy was improved from 0.28 deg to less than 1.1 arcsec, and the standard deviation for six measurements was less than 1.2 arcsec, which indicates that the angle correction method was effective in improving the linearity of the eddy current sensors and reducing the influence of manufacturing and installation errors.
The quality of aerial remote sensing imaging is heavily impacted by the thermal distortions in optical cameras caused by temperature fluctuations. This paper introduces a lumped parameter thermal network (LPTN) model for the optical system of aerial cameras, aiming to serve as a guideline for their thermal design. By optimizing the thermal resistances associated with convection and radiation while considering the camera’s unique internal architecture, this model endeavors to improve the accuracy of temperature predictions. Additionally, the proposed LPTN framework enables the establishment of a heat leakage network, which offers a detailed examination of heat leakage paths and rates. This analysis offers valuable insights into the thermal performance of the camera, thereby guiding the refinement of heating zones and the development of effective active control strategies. Operating at a total power consumption of 26 W, the thermal system adheres to the low-power limit. Experimental data from thermal tests indicate that the temperatures within the optical system are maintained consistently between 19 °C and 22 °C throughout the flight, with temperature gradients remaining below 3 °C, satisfying the temperature requirements. The proposed LPTN model exhibits swiftness and efficacy in determining thermal characteristics, significantly facilitating the thermal design process and ensuring optimal power allocation for aerial cameras.
The precise thermal control of aerial cameras is crucial for the acquisition of high-resolution imagery, and an accurate temperature prediction is essential to achieve this. This paper presents a methodology for modifying thermal network models to improve the accuracy of temperature prediction for aerial cameras. Seven types of thermal parameters are extracted from the thermal network model, and a thermally sensitive analysis identifies eleven key parameters to streamline the processing time. Departing from traditional methods that rely on steady-state data, this study conducts transient thermal tests and leverages polynomial fitting to facilitate thorough parameter modification. To ensure data reliability, the Monte-Carlo algorithm is employed to explore the parameter spaces of key parameters, analyzing temperature errors. Subsequently, the Least-Squares method is utilized to obtain optimal estimates of the key parameter values. As a result, the updated model demonstrates significantly improved accuracy in temperature predictions, achieving a reduction in the maximum absolute error between the predicted and experimental results from 22 °C to 4 °C, and a lowering of the relative error from 33.8% to 6.1%. The proposed modification method validates its effectiveness in modeling and enhancing the precision of thermal network models for aerial cameras.
Accurate temperature prediction is a prerequisite for precise thermal control of an aerial camera, which is crucial for capturing high-resolution images. This paper introduces a methodology for improving the precision of temperature predictions generated by thermal network models for aerial cameras, which involves correcting the structure and parameters of the thermal network. The passive thermal control optimization design of the frame insulation structure and convective heat transfer coefficients ensures that key thermal parameter values are maintained within optimum ranges. Following an analysis of the change trend consistency between the predicted temperatures and the transient thermal experimental data, the thermal network structure is modified to reduce the discrepancy between the thermal network and physical models. Using the Monte Carlo algorithm, parameter spaces for key thermal parameters are explored using different sampling numbers. The optimal parameter values are then derived by satisfying the tolerance limit condition and minimizing the objective function. As the sampling number increases, the RMSE between the predicted and experimental results decreases from 1.82 °C to 1.44 °C, and the R-squared value increases from 0.78 to 0.91. The proposed correction method demonstrates its efficiency and validity in refining the accuracy of thermal network models for aerial cameras.