In this study, the cause of failure of a low-carbon steel pipe meeting standard KS D 3562 (ASTM A135), in a district heating system was investigated. After 6 years of operation, the pipe failed prematurely due to pitting corrosion, which occurred both inside and outside of the pipe. Pitting corrosion occurred more prominently outside the pipe than inside, where water quality is controlled. The analysis indicated that the pipe failure occurred due to aluminum inclusions and the presence of a pearlite inhomogeneous phase fraction. Crevice corrosion occurred in the vicinity around the aluminum inclusions, causing localized corrosion. In the large pearlite fraction region, cementite in the pearlite acted as a cathode to promote dissolution of surrounding ferrite. Therefore, in the groundwater environment outside of the pipe, localized corrosion occurred due to crevice corrosion by aluminum inclusions, and localized corrosion was accelerated by the large fraction of pearlite around the aluminum inclusions, leading to pipe failure.
Carbonaceous residues on copper pipes during the manufacturing process are known to be one of the main causes of pitting corrosion on copper pipes. This study examined the corrosion-inhibiting effect of benzotriazole (BTA) on C12200 copper pipes with carbonaceous film in synthetic tap water. In the absence of BTA, localized corrosion mechanisms due to galvanic corrosion, crevice corrosion, and oxygen-concentration cell were proposed in the boundary part of the carbonaceous film on the copper through X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) with energy dispersive spectrometer (EDS) analyses. Electrochemical tests showed that BTA inhibits corrosion by forming Cu−BTA complexes on all over the copper surface where carbonaceous film is present. BTA mitigates galvanic corrosion and crevice corrosion at the boundary of the carbonaceous film and suppresses the formation of oxygen-concentration cells through the formation of a Cu−BTA complex.
This study investigates the corrosion resistance of Type 316 stainless steel as a candidate material for radioactive waste disposal canisters. The viability of stainless steel is examined under groundwater conditions with variations in pH, bisulfide ions (HS−), and chloride ions (Cl−) concentrations. Utilizing response surface methodology, correlations between corrosion factors and two crucial response variables, passive film breakdown potential and protection potential, are established. Cyclic potentiodynamic polarization tests and advanced analytical techniques provide detailed insights into the material’s behavior. This research goes beyond, deriving an equation through response surface methodology that elucidates the relationship between the factors and breakdown potential. HS− weakens the passive film and reduces the pitting corrosion resistance of the stainless steel. However, this study highlights the inhibitory effect of HS− on pitting corrosion when Cl− concentrations are below 0.001 M and at equivalent concentrations of HS−. Under these conditions, immediate re-passivation occurs from the destroyed passive film to metal sulfides such as FeS2, MoS2, and MoS3. As a result, no hysteresis loop occurs in the cyclic polarization curve in these conditions. This research contributes to the understanding of Type 316 stainless-steel corrosion behavior, offering implications for the disposal of radioactive waste in geological repositories.
13 January 2023 in Journal of Physics and Chemistry of Solids
This study investigated the corrosion behavior of ADC12 and A365 aluminum alloys for automotive parts in the context of the growing use of aluminum parts in electric vehicles. Only ADC12 exhibited the formation of Al(OH)3 particle layer after corrosion, which was attributed to the microgalvanic effect influenced by the geometry characteristics of its microstructure. Results revealed that ADC12 was prone to forming Al(OH)3 particle layers due to the geometric effects of Si and θ-Al2Cu, which facilitates the isolation of α-Al. The distribution of band-shaped galvanic currents, concentrated in a small α-Al matrix region, was primarily governed by the geometry of Si, creating a preferred structure for α-Al isolation. Additionally, the geometry of θ-Al2Cu contributed to a significant increase in electrochemical kinetics, particularly at the tri-metallic coupled region, further enhancing the susceptibility of the isolation. As a result, the formation of the Al(OH)3 particle layer was attributed to the corrosion of isolated α-Al particles, generated through the synergistic effect of microgalvanic corrosion. Moreover, the corrosion attack progressed along the eutectic Si network, accompanied by θ-Al2Cu. Overall, the corrosion mechanism of ADC12 and A365 alloy was proposed.