Žarko Petrović

Prof. Žarko Petrović

Faculty of civil engineering and architecture, University of Niš
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 April 2022 in Journal of Vibration Engineering & Technologies
Verified
Journal Article
Open access
PDF file
Dragan ZlatkovDragan Zlatkov
Dragan Zlatkov
DRDanilo Ristić
Danilo Ristić
AZAndrija Zorić
Andrija Zorić
JRJelena Ristić
Jelena Ristić
Biljana MladenovićBiljana Mladenović
Biljana Mladenović
MTMarina Trajković-Milenković
Marina Trajković-Milenković
Purpose: The novel metallic damper device for passive vibration control of structures, which is designed primarily for seismic protection of buildings, is described in this paper. It consists of the base plate, fixed into foundation, with two concentric cycles of vertical components and a middle steel activating plate anchored to the isolated structure. During an earthquake, the middle steel activating plate moves together with main structure causing bending of vertical components. Seismic energy is absorbed due to plastic deformation of the vertical components of the damper. The performance of various vertical components, the key elements of the novel damper is studied in this paper. The advantages of this type of damper reflect in its ability to adapt its own features depending on the intensity of the earthquake and that it has equivalent characteristics in every horizontal direction due to rotational symmetry. Methods: Sixteen experimental tests of the vertical components of the damper, were conducted to obtain their hysteretic behaviour. Numerical models using the finite element method and the Abaqus/Standard software were developed, validated and verified with experimentally obtained results. Results: The experimental results show significant energy absorption of the vertical components of the novel damper. Numerical models can be used in further research instead of expensive experimental tests. Conclusions: The vertical components of the novel damper possess extraordinary hysteretic performance. If the components of the energy dissipation device are properly designed for maximum displacements, the device is not expected to suffer heavy damage or total failure during earthquakes.

28 April 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Žarko PetrovićŽarko Petrović
Žarko Petrović
Bojan MiloševićBojan Milošević
Bojan Milošević
SRSlobodan Ranković
Slobodan Ranković
Biljana MladenovićBiljana Mladenović
Biljana Mladenović
Dragan ZlatkovDragan Zlatkov
Dragan Zlatkov
Predrag PetronijevićPredrag Petronijević
Predrag Petronijević
Strengthening of concrete structures is applied as a solution for various deterioration problems in civil engineering practice. This also refers to the structures made of self-compacting concrete (SCC), which is increasingly in use, but there is a lack of research in this field. This paper presents an experimental analysis of flexural behavior of reinforced concrete (RC) continuous beams made of SCC, strengthened with fiber reinforced polymer (FRP) materials (glass (GFRP) and carbon (CFRP) bars, CFRP laminates), by the use of near surface mounted (NSM) and externally bonded (EB) methods. Six two-span continuous beams of a total length of 3200 mm, with the span between supports of 1500 mm and 120/200 mm cross section, were subjected to short-term load and tested. The displacements of beams and the strains in concrete, steel reinforcement, FRP bars and tapes were recorded until failure under a monotonically increasing load. The ultimate load capacities of the strengthened beams were enhanced by 22% to 82% compared to the unstrengthened control beam. The ductility of beams strengthened with GFRP bars was satisfactory, while the ductility of beams strengthened with CFRP bars and tapes was very small, so the failure modes of these beams were brittle.

3 December 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Žarko PetrovićŽarko Petrović
Žarko Petrović
Bojan MiloševićBojan Milošević
Bojan Milošević
AZAndrija Zorić
Andrija Zorić
SRSlobodan Ranković
Slobodan Ranković
Biljana MladenovićBiljana Mladenović
Biljana Mladenović
Dragan ZlatkovDragan Zlatkov
Dragan Zlatkov
Self-compacting concrete (SCC) is a type of concrete that is placed in the formwork under its own weight. Although there are many studies showing the behavior of SCC beams, most relate to the behavior of simple supported beams. Unlike those, this is a study of continuous beams made of SCC aimed to analyze their flexural performance as well as to confirm the possibility of using nonlinear finite element analysis (FEA) in the design of such structural elements. An experimental study of three two-span continuous beams of a total length of 3400 mm, with the span between supports of 1600 mm, with 150/200 mm cross section made of SCC exposed to short-term loading, was carried out. The parameter that varied is the percentage of tensile reinforcement, with values of 0.65, 0.86 and 0.94 being selected. As all analyzed beams have shown a satisfactory load-bearing capacity and stiffness, the research confirmed the possibility of using SCC in continuous beams in civil engineering practice. Using Abaqus/Standard software, a nonlinear numerical model is proposed, which is validated and verified against experimental research, as there is only a 5% difference in the numerically calculated ultimate load compared to the experimentally measured values.

8 January 2026 in Materials
Verified
Journal Article
Open access
PDF file
Žarko PetrovićŽarko Petrović
Žarko Petrović
Bojan MiloševićBojan Milošević
Bojan Milošević
MSMarija Spasojevic Surdilovic
Marija Spasojevic Surdilovic
AZAndrija Zorić
Andrija Zorić
Dragana TurnićDragana Turnić
Dragana Turnić
This paper presents an experimental investigation on the flexural performance of continuous two-span reinforced concrete beams made with self-compacting concrete (SCC) incorporating natural and recycled coarse aggregates. A total of nine beams were tested under static loading conditions. The beams were divided into three groups based on different reinforcement ratios, and within each group, three aggregate replacement levels were used: 0%, 50%, and 100% recycled coarse aggregate. All beams were designed with identical cross-sections and subjected to two-point loading to simulate continuous support conditions. The study focused on evaluating cracking behavior, load–deflection response, and failure modes. The experimental results highlight that partial replacement with recycled aggregates (RAC50) can achieve comparable or even improved mechanical performance compared to natural aggregate beams, including enhanced compressive strength and ductility. Beams with 100% recycled aggregates (RAC100) showed slightly higher deflections and earlier crack initiation, particularly at lower reinforcement ratios, although overall flexural behavior remained consistent with natural aggregate concrete (NAC) beams. It was also observed that as reinforcement ratio increases, the influence of aggregate type diminishes, indicating that steel reinforcement predominantly governs the structural response at higher ratios. Crack widths and propagation patterns were systematically monitored, confirming that RAC beams maintain acceptable deformation and ductility under load. These findings emphasize the feasibility of using high-quality recycled aggregates in structural SCC elements, providing a sustainable alternative without compromising performance, and offering guidance for the design of continuous RAC beams.

10 January 2026 in Eng
Verified
Journal Article
Open access
PDF file
Žarko PetrovićŽarko Petrović
Žarko Petrović
AZAndrija Zorić
Andrija Zorić
Bojan MiloševićBojan Milošević
Bojan Milošević
SRSlobodan Ranković
Slobodan Ranković
Predrag PetronijevićPredrag Petronijević
Predrag Petronijević
This paper presents an experimental and numerical investigation of continuous reinforced concrete (RC) beams made of self-compacting concrete (SCC) strengthened with fiber-reinforced polymer (FRP) bars using the Near-Surface Mounted (NSM) method. While the majority of previous studies have focused on simply supported beams, this work examines two-span continuous beams, which are more representative of real structural behavior. Four SCC beams were tested under static loading to evaluate the influence of the FRP reinforcement position on flexural capacity and deformational characteristics. The beams were strengthened using glass FRP (GFRP) bars embedded in epoxy adhesive within pre-cut grooves in the concrete cover. Experimental results showed that FRP reinforcement significantly increased the ultimate load capacity, while excessive reinforcement reduced ductility, leading to a more brittle failure mode. A three-dimensional finite element model was developed in Abaqus/Standard using the Concrete Damage Plasticity (CDP) model to simulate the nonlinear behavior of concrete and the bond–slip interaction at the epoxy–concrete interface. The numerical predictions closely matched the experimental load–deflection responses, with a maximum deviation of less than 3%. The validated model provides a reliable tool for parametric analysis and can serve as a reference for optimizing the design of continuous SCC beams strengthened by the NSM FRP method.

16 November 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SRSlobodan Ranković
Slobodan Ranković
AZAndrija Zorić
Andrija Zorić
TVTodor Vacev
Todor Vacev
Žarko PetrovićŽarko Petrović
Žarko Petrović
The issue of the cut-off splicing of an additional fiber-reinforced polymer (FRP) bar in the near-surface mounted (NSM) technique for reinforced concrete (RC) beam strengthening exposed dominantly to bending is insufficiently investigated. A possible solution of this issue is a new proposed technique: a double-strap joint. It implies the widening of the groove at the cut-off location and the symmetrical installing of additional supplements of FRP reinforcement. In this research, beam strength has been determined for the following cases: additional NSM FRP reinforcement without a cut-off, with a cut-off, and without overlapping, and with different lengths of splice overlapping. A nonlinear analysis based on the finite element method (FEM) has been applied. The length of the cut-off splice of the additional FRP reinforcement with glass fibers (GFRP) was 20Ø, 40Ø, and 60Ø. The validation of the numerical model and a comparison of the results were conducted by using the authors’ experiments. It has been shown that, in the case of a cut-off of NSM GFRP bars, a significant loss in strengthening efficiency occurs, and that, with an increase in the overlapping length, this loss decreases. An overlapping length of 60Ø provides full strengthening. An efficiency assessment was carried out via the use of a parametric study, varying the FRP bar material type and its diameter for a constant splicing length.