Among the most valuable types of renewable energy available today is wind energy. The reliability of WF systems must be regularly evaluated at every stage of their “life,” from design to operation, if a wind farm energy system is to be effective and function damage-free. Three key goals are presented in the article. The theory of fundamental quantities in reliability and maintenance analysis should be derived and explained first. Second, as a consequence of maintainability, theoretical correlations between reliability and mean time between failures (MTBF) are provided. The three-state theory of the WF procedure for operation presented in the research serves as the foundation for the analytical analysis of WF reliability. The time between failures is investigated as a function of maintainability, and the dependability of the WF under examination is assessed as a function of service life. The WF owner can make the best decisions to renew the WF and increase its reliability, energy, financial efficiency, etc. by being aware of the existing reliability of the WF system in use.
1 July 2018 in Archives of Civil and Mechanical Engineering
This paper presents the fundamentals of the design and applications of new worm gear drive solutions, which enable the minimisation of backlash and are characterised by higher kinematic accuracy. Different types of worm surfaces are briefly outlined. Technological problems concerning the principles of achieving a high degree of precision in machining are also described. Special attention is paid to the shaping of conical helical surfaces. Increasing the manufacturing precision of drive components allows one to achieve both lower backlash values and lower levels of its dispersion. However, this does not ensure that backlash can be eliminated, with its value being kept low during longer periods of operation. This is important in positioning systems and during recurrent operations. Various design solutions for drives in which it is possible to reduce backlash are presented. Results of experiments of a worm gear drive with a worm axially adaptive only locally, in its central section, are presented. In this solution, it is possible to reduce backlash by introducing adjustment settings without disassembling the drive. An important scientific problem concerned defining the principles of achieving a compromise between the effectiveness of reducing backlash and the required load capacity of the drive. In this paper it has been shown that in worm gear drives with a locally axially adaptive worm, as well as with a worm wheel with a deformable rim, it is possible to achieve significant reduction of backlash. In high precision drives—for example, those with an average backlash value of <15 micrometers—this can enable more than a two-fold reduction of the average backlash value and more than a three-fold decrease of the standard deviation of local backlash values.
1 February 2018 in International Journal of Applied Mechanics and Engineering
The article presents a stability assessment method of the mobile crane handling system based on the safety indicator values that were accepted as the trajectory optimization criterion. With the use of the mathematical model built and the model built in the integrated CAD/CAE environment, analyses were conducted of the displacements of the mass centre of the crane system, reactions of the outrigger system, stabilizing and overturning torques that act on the crane as well as the safety indicator values for the given movement trajectories of the crane working elements.
18 August 2015 in Journal of Mechanisms and Robotics
This article presents the design of patented worm gear drives, which allow backlash adjustment or elimination by using specially designed worms and worm wheels. Many of the presented solutions allow backlash adjustment without disassembling the drive. The proposed solutions allow reduction of both backlash and its standard deviation to as little as 7.5% and 5% of their initial values, respectively. The presented solutions are a good alternative to harmonic drives and conventional precise drives, which are currently in use. The presented drives can successfully find their application in mechanisms for precise positioning of test benches, as well as in precise technological equipment, technological instrumentation, and in the case of miniaturization—in mechanisms resistant to severe working conditions.
The article presents stability assessment of the mobile crane handling system based on the developed method with the use of the mathematical model built and the model built in the integrated CAD/CAE environment. The model proposed consists of the main crane assemblies coupled together: the truck with outrigger system and the base, the slewing column, the inner and outer arms, the six-member telescopic boom, the hook with lifting sling and the transported load. Analyses were conducted of the displacements of the mass centre of the crane system, reactions of the outrigger system, stabilizing and overturning torques that act on the crane as well as the safety indicator values for the given movement trajectories of the crane working elements.