Zhiyuan Xu

Dr. Zhiyuan Xu

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 July 2024 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
Zhiyuan XuZhiyuan Xu
Zhiyuan Xu
Ming ChengMing Cheng
Ming Cheng
HWHonghui Wen
Honghui Wen
YJYang Jiang
Yang Jiang
Given its high torque density, robust structure, and efficient heat dissipation, the in-wheel flux-switching machine has garnered significant interest in e-bike applications. This paper introduces an in-wheel hybrid-excitation flux-switching (IW-HEFS) machine to reduce the reliance on the costly PM materials. Specifically designed for in-wheel applications, the optimization issue for the IW-HEFS machine involves six variables, six objectives, and two primary constraints. To streamline the optimization process, three principles are proposed to improve the solving efficiency by means of the Kriging model, sensitivity analysis, and dimensionality reduction strategies. On this basis, the electromagnetic performance of the IW-HEFS machine is significantly enhanced, particularly in terms of the torque and efficiency characteristics. Moreover, the optimization results are compared, along with the analysis of their strengths and weaknesses. Additionally, an evaluation of the proposed IW-HEFS machine is conducted to further reveal its potential in in-wheel applications by comparing with an existing outer-rotor flux-switching permanent magnet machine. Finally, the prototype experiment is launched with the consideration of manufacturing friendliness to estimate the analytical discussion.

21 December 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
Zhiyuan XuZhiyuan Xu
Zhiyuan Xu
Ming ChengMing Cheng
Ming Cheng
MTMinghao Tong
Minghao Tong
CLChunyu Lu
Chunyu Lu
This paper presents an outer-rotor hybrid-excitation flux-switching (OR-HEFS) machine with E-type stator cores, specifically designed for electric vehicles applications. To address the challenging working conditions encountered in in-wheel driving electric vehicles, an improved hierarchical coordinated optimization (HCO) method is proposed to optimize the proposed machine. This paper commences with an introduction to the structural evolution, and followed by the initial design stage of the proposed machine. Subsequently, in order to streamline the optimization process, the HCO method is launched by balancing the dimension-reduction and the comprehensive confidence of the optimization results. After optimization, an overall evaluation of the optimized OR-HEFS machine is conducted both by the finite element analysis and prototype experiments. The results indicate that the HCO method improves the performance of the optimized OR-HEFS machine by 18.7% lower iron loss, and 5.44% better flux-regulation capability than the initial design. Particularly for the torque characteristic, the optimized 6-19 OR-HEFS machine possesses 22.6% higher average torque and 63.2% lower ripple under the hybrid-excitation condition. Moreover, compared to the conventional outer-rotor flux-switching permanent magnet machine with traditional stator cores, the proposed OR-HEFS machine achieves nearly equivalent output torque with a 50% reduction in PM usage.

25 September 2024 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Ming ChengMing Cheng
Ming Cheng
Zhiyuan XuZhiyuan Xu
Zhiyuan Xu
Gan ZhangGan Zhang
Gan Zhang
Flux-switching permanent magnet (FSPM) machines hold considerable potential in automobile industry due to the simple rotor topology and relatively higher torque density. Extensive performance evaluation is critical to realize the commercialization of FSPM machines in the design stage, and employing a time-saving and store-efficient method is becoming more and more paramount. From this perspective, this paper proposes a vector magnetic circuit based equivalent magnetic network (VMC-EMN) method, where the eddy current effect in the iron core on the flux is taken into account by using a new magnetic component of magductance (or magnetic-inductance) for the first time. By introducing the magductance component, the proposed VMC-EMN method exhibits satisfactory accuracy and speed in assessing the electromagnetic performance of FSPM machines, particularly in terms of the torque and the eddy current loss. Moreover, two FSPM machines with different power levels are analyzed to illustrate the modeling and implementation processes of the proposed VMC-EMN method. Finite element analysis and experimental results are provided simultaneously to validate the effectiveness of the VMC-EMN method. The results obtained by traditional reluctance-based network are compared as well to highlight the superiority of the proposed method.

10 October 2024 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
Zhiyuan XuZhiyuan Xu
Zhiyuan Xu
Ming ChengMing Cheng
Ming Cheng
MTMinghao Tong
Minghao Tong
To furnish an instructive guideline for the design of E-core outer-rotor flux-switching permanent magnet (OR-FSPM) machines, the stator-poles and rotor-teeth (P-T) combinations are investigated through the machine unit model in this paper. Based on the operating and complementary principles, the P-T combination selection principle for E-core OR-FSPM machines is established with the purpose of attaining a high-purity sinusoidal phase flux and a concurrently reduced cogging torque. With the P-T combination selection principle, a case study on the three-phase E-core OR-FSPM machine is presented to demonstrate the effectiveness and reliability of the proposed methodology. The design and optimization considerations are extracted as well during the process. Moreover, an optimization framework is established and four E-core OR-FSPM machines with various P-T combinations are optimized simultaneously within the prescribed procedure. The optimization results indicate that the optimization procedure will not compromise the validity of the selected P-T combination in the preliminary design stage. Consequently, the performances of the optimized E-core OR-FSPM are verified through the prototype experiment, which further confirms the efficacy of the proposed P-T combinations selection principle.

2 July 2025 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
Zhiyuan XuZhiyuan Xu
Zhiyuan Xu
Ming ChengMing Cheng
Ming Cheng
HWHonghui Wen
Honghui Wen
PSPeng Su
Peng Su
MTMinghao Tong
Minghao Tong
Wei HuaWei Hua
Wei Hua
Aiming to improve torque characteristics, a rotor salient-pole modulator design method is proposed for flux-switching permanent magnet (FSPM) machines by considering both pole number and configuration. With the aid of general air-gap field modulation theory, the influence of rotor pole number is analyzed, and a reliable selection method is proposed to enhance average torque and reduce torque ripple. The result indicates that the rotor modulator with an odd pole number possesses better torque characteristics. Thereafter, the configuration of the rotor salient-pole modulator is investigated and modeled mathematically by the design parameters. Utilizing the proposed design method, an FSPM machine is designed and manufactured. Through the performance comparison and prototype experiment, the proposed design method is verified to be effective in improving the torque characteristics. Without increasing the PM amount, the average torque is enhanced by 14.8%, and the torque ripple is reduced by 93.1%.

8 May 2025 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
WZWentao Zhang
Wentao Zhang
Zhongze WuZhongze Wu
Zhongze Wu
ZWZhimian Wang
Zhimian Wang
Wei HuaWei Hua
Wei Hua
Ying FanYing Fan
Ying Fan
Ming ChengMing Cheng
Ming Cheng
In hybrid excited switched flux (HESF) machine, the DC winding provides the magnetic field regulation capability. However, it is also affected by the parasitic effects of DC winding induced voltage due to the inductance harmonics. Firstly, the phenomena and principles of the design tradeoff between the DC winding induced voltage and flux regulation capability are investigated through the multi-objective optimization results and case study for the HESF machines. It is observed that the high flux regulation capability HESF machines inevitably suffer from high DC winding induced voltage pulsation, which can be primarily attributed to the magnetic saturation in the stator lamination. This issue arises from the strong interaction between PM flux-leakage and the DC winding flux-linkage. Then, guidelines for addressing the design tradeoff are proposed, including the slot pole number combination, PM material selection and the DC winding power supply methods. It is found that HESF machine with 12-stator-slot and 13-pole rotor could suppress the DC winding induced voltage by 61% . Additionally, ferrite magnet material could improve the flux regulation capability, although the torque density is reduced compared to the NdFeB material. Different DC winding power supply methods are also discussed for addressing the design tradeoff between the DC winding induced voltage and flux regulation capability. Finally, a HESF machine prototype is built and tested. All the FE analysis are verified and validated through the finite element analysis and experimental results.