With the continuous development and utilization of clean energy, the thermal utilization of solar energy is an important research direction. In view of the problems of the low utilization rate of solar heat in alpine regions of solar energy, an air-type vacuum-tube solar collector (AVSC) with air as the heat-exchange medium was designed. The vacuum tube of the solar heat collector adopted a double-pass spiral direct-current structure, and the vacuum tube had a built-in heat-storage rod. In order to test the heat collection performance of the designed air evacuated-tube solar collector, a heat collection performance test of the collector was conducted. The results showed that the average heat collection efficiency of the vacuum tube solar collector without phase-change heat-storage rods was 38%. The evacuated-tube solar collector using water as the heat transfer medium had an average heat collection efficiency of 58%. The average equivalent heat collection efficiency of the AVSC with a built-in phase-change heat-storage rod was 61%.
Urban transportation systems, particularly underground interchanges, present significant challenges for sustainable and resilient urban design due to their complex road geometries and dense traffic signage. These challenges are further compounded by the interaction of diverse road users, which heightens the risk of accidents. To enhance both safety and sustainability, this study integrates advanced driving simulation techniques with machine learning models to improve driving safety and comfort in underground interchanges. By utilizing a driving simulator and 3D modeling, real-world conditions were replicated to design key traffic safety features with an emphasis on sustainability and driver well-being. Critical safety parameters, including speed, acceleration, and pedal use, were analyzed alongside comfort metrics such as lateral acceleration and steering torque. The LightGBM machine learning model was used to classify safety and comfort grades with an accuracy of 97.06%. An important ranking identified entrance signage and deceleration zones as having the greatest impact on safety and comfort, while basic road sections were less influential. These findings underscore the importance of considering visual cues, such as markings and wall color, in creating safer and more comfortable underground road systems. This study’s methodology and results offer valuable insights for urban planners and engineers aiming to design transportation systems that are both safe and aligned with sustainable urban mobility objectives.
With the development of the economy, the cost of UAV R&D and production was reduced, and it was widely used in video aerial photography, agriculture and forestry, industry, rescue, and public safety. UAV s have become one of the popular high-tech industries. Aiming at the characteristics of the use of Small-sized load UAV, a permanent magnet brushless DC motor was designed, and simulation processing was performed to analyze the performance of the motor. The motor was adopted a 24-slot 10-pole structure, an inner rotor form, a rated output power of 120 W, a rated voltage of 113V, the permanent magnet material is rubidium iron boron NdFe35, the rotor outer diameter is 25 mm, and the rotor inner diameter is 10 mm. The results show that the flux density and flux linkage distribution of the motor were concentrated in the stator slots during transient, and the magnetic lines of force were evenly distributed inside the motor. The time for the cogging torque to form a cycle is 16.3 ms, and the peak value at 8 ms is 4.2 N.m.
16 February 2023 in International Transactions on Electrical Energy Systems
With the development of power electronics technology, permanent magnet brushless DC motors have developed rapidly and are now widely used in electric vehicles, flywheel energy storage, rail transit, and other applications. The stator slot structure is one of the main factors affecting the performance of the motor. A low-power permanent magnet brushless DC motor was selected as the research object, and the finite element analysis method was used to study the effects of different slot and pole combinations and stator slot types on the cogging torque, reluctance torque, and back electromotive force of the permanent magnet brushless DC motor. The influence of the stator slot structure of the motor on the performance of the motor was analyzed, and the optimal slot-pole combination and stator slot type were determined. The results showed that the cogging torque of the 2-stage 24-slot motor was 14 mN·m, and the reluctance torque was 75 mN·m. The cogging torque and reluctance torque were the smallest, and the back electromotive force waveform was similar to a trapezoidal wave. The motor cogging torque of the pear-shaped round slot was the smallest, with a value of 460 mN·m, and the motor reluctance torque of the pear-shaped trapezoidal slot was the smallest, with a value of 1.2 N·m. The back electromotive force waveforms of the motors with four different stator slot types were similar.
With the rapid development of industrialization, the excessive use of fossil fuels has caused problems such as increased greenhouse gas emissions and energy shortages. The development and use of renewable energy has attracted increased attention. In recent years, solar heat pump heating technology that uses clean solar energy combined with high-efficiency heat pump units is the development direction of clean heating in winter in northern regions. However, the use of solar energy is intermittent and unstable. The low-valley electricity policy is a night-time electricity price policy. Heat pump heating has problems such as frosting and low efficiencies in cold northern regions. To solve these problems, an exergy analysis model of each component of a phase-change heat-storage coupled solar heat pump heating system was established. Exergy analysis was performed on each component of the system to determine the direction of optimization and improvement of the phase-change heat-storage coupled solar heat pump heating system. The results showed that optimizing the heating-end heat exchanger of the system can reduce the exergy loss of the system. When the phase-change heat-storage tank meets the heating demand, its volume should be reduced to lower the exergy loss of the tank heat dissipation. Air-type solar collectors can increase the income exergies of solar collectors.