The monitoring of ships is of paramount importance for ocean and coastal area surveillance. The synthetic aperture radar is shown to be a key sensor to provide effective and continuous observation of ships due to its unique imaging capabilities. When advanced synthetic aperture radar imaging systems are considered, the full scattering information is available that was demonstrated to be beneficial in developing improved ship detection and classification algorithms. Nonetheless, the capability of polarimetric synthetic aperture radar to observe marine vessels is significantly affected by several imaging and environmental parameters, including the incidence angle. Nonetheless, how changes in the incidence angle affect the scattering of ships still needs to be further investigated since only a sparse analysis, i.e., on different kinds of ships of different sizes observed at multiple incidence angles, has been performed. Hence, in this study, for the first time, the polarimetric scattering of the same ship, i.e., a small fishing trawler, which is imaged multiple times under the same sea state conditions but in a wide range of incidence angles, is analysed. This unique opportunity is provided by a premium L-band UAVSAR airborne dataset that consists of five full-polarimetric synthetic aperture radar scenes collected in the Gulf of Mexico. Experimental results highlight the key role played by the incidence angle on both coherent, i.e., co-polarisation signature and pedestal height, and incoherent, i.e., multi-polarisation and total backscattering power, polarimetric scattering descriptors. Experimental results show that: (1) the polarised scattering component is more sensitive to the incidence angle with respect to the unpolarised one; (2) the co-polarised channel under horizontal polarisation dominated the polarimetric backscattering from the fishing trawler at lower angles of incidence, while both co-polarised channels contribute to the polarimetric backscattering at higher incidence angles; (3) the HV polarisation provides the largest target-to-clutter ratio at lower incidence angles, while the HH polarisation should be preferred at higher angles of incidence.
10 August 2023 in IEEE Geoscience and Remote Sensing Letters
In this study, the polarimetric scattering of a ship and the surrounding sea is analysed at multiple incidence angles using fully polarimetric L-band Synthetic Aperture Radar (SAR) data. The behaviour of polarised and unpolarised backscatter is analysed using the degree of polarisation, the signature of the degree of polarisation, and the pedestal height. Experimental results show that, although the unpolarised backscattered power increases monotonically versus the incidence angle for both target and sea, the two scenarios call for a distinctive polarimetric behaviours. The polarised component in the backscattered signal is demonstrated to be the main source of variability of the target-to-clutter ratio (TCR) against the incidence angle.
6 May 2022 in IEEE Transactions on Electromagnetic Compatibility
In this article, an effective method using reverberation chambers (RCs) to measure the total radiated power (TRP) from mobile phones (MPs) is shown. The method exploits a novel measurement setup that links the MP under test inside the working volume of the RC to a real external wireless communication system. Therefore, no radio base station emulator (BSE) is necessary in the proposed method. For the aim of the method, we have found that the connection of the MP under test with the real wireless network system is held stable by the measurement setup in both line of sight and non-line-of-sight configurations. Hence, TRPs from MPs are measured in different conditions of connection even though the received and transmitted signals are not completely controllable. Measured TRPs are shown up to maximum values, which are useful for both electromagnetic interference evaluation and human exposure assessment in a world where wireless devices are spreading more and more. By maximum TRP values, which meaningfully allow result comparisons regardless of the use or not of a BSE, we also show a novel method to estimate the part of TRP absorbed into user body during a call.
22 August 2022 in IEEE Transactions on Electromagnetic Compatibility
In this article, we will show how to improve the standard procedure in the Annex G of IEC 61000-4-21 on the shielding effectiveness (SE) of materials and gaskets through measurements performed in reverberation chambers. We thoroughly analyze and discuss measurement models (MMs), which are already present in the literature including the standardized model. Moreover, we further derive one of these MMs in a different way and introduce a different application, which is suitable to measure high SE values. We apply such MMs and compare results. By the analysis, discussion, and comparisons of measurement results, we clearly provide a robust improvement to the standard measurement procedure.
Sea surface plays a crucial role in influencing both oceanic and atmospheric processes. Today, satellite-based observations of sea surface wind are regularly utilized across a broad spectrum of oceanic, atmospheric, and climate-related applications. In this framework, real-aperture microwave active sensors are extensively used to deliver sea surface wind data to the operational communities working in oceanography and meteorology. In this paper, we investigate the azimuth cut-off sea wind speed retrieval approach by taking benefit of multi-look synthetic aperture radar imagery acquired in the Gulf of Salerno, Italy. The images have been co-located with level-2 Sentinel-1 wind products and with the European Centre for Medium Range Weather Forecast forecasting winds. Preliminary results show that azimuth cut-off is not sensitive to sea states lower that a given threshold, which will be assessed when a larger dataset will be available. Further analysis will be provided by the time of the conference.
In this study, the Geophysical Model Function (GMF) based approach is used to estimate the wind field at the Gulf of Salerno, and preliminary results obtained using the C-band data set are shown. Sentinel-I Ground range detected (GRD) data sets are exploited to derive Synthetic Aperture Radar (SAR) based wind field by C-band model (CMOD) GMFs driven by Scatterometer-based wind directions. The SAR-derived wind field is then compared with collocated scatterometer measurements and model wind field data from European Center for Medium-Range Weather Forecasts (ECMWF).