This paper characterizes the static, dynamic, and controlled behavior of a high-performance electro-hydraulic actuator to assess its suitability for use in evaluating machine tool behavior. The actuator consists of a double-acting piston and cylinder arrangement controlled by a servo valve and a separate rear chamber controlled by a separate valve, designed to work in conjunction to generate static forces of up to 7000 N that can be superposed with dynamic forces of up to ±1500 N. This superposition of periodic forces with a non-zero mean makes the actuator capable of applying realistic loading conditions like those experienced by machines during cutting processes. To characterize the performance of this actuator, linearized static and dynamic models are described. Since experiments with the actuator exhibit nonlinear characteristics, the linearized static model is expanded to include the influence of nonlinearities due to flow, leakages, saturations, and due to friction and hysteresis. Since all major nonlinearities are accounted for in the expanded static model, the dynamical model remains linear. Unknown static and dynamical model parameters are calibrated from experiments, and the updated models are observed to capture experimentally observed behavior very well. Validated models are used to tune the proportional and integral gains for the closed-loop control strategy, and the model-based tuning in turn guides appropriate closed-loop control of the actuator to increase its bandwidth to 200 Hz. The statically and dynamically characterized actuator can aid machine tool structural testing. Moreover, the validated models can instruct the design and development of other higher-performance electro-hydraulic actuators, guide the conversion of the actuator into a damper, and also test other advanced control strategies to further improve actuator performance.
The Matterhorn field, operated by TOTAL, is located in the Gulf of Mexico, on block 243 of the Mississippi Canyon. It produces oil and gas from seven wells in a water depth of approximately 2800 ft. This paper reviews a hydrate blockage incident which occurred on the Gas Export Pipeline (GEP) of the Matterhorn platform. A comprehensive flow assurance study (fluids characterization, steady state and transient flow simulations) was conducted in order to understand the causes of the incident and to develop prevention, mitigation and remediation strategies. The study described herein gives a methodology to be used in the design and operation of gas pipelines, principally in the deep water subsea environment, from a hydrate management perspective. The GEP was operated in the hydrate-stable and two-phase region, but still within industry standards in terms of dryness (dewpoint). The study shows that a temporary deviation from the normal operating conditions lead to a gradual water build-up, resulting in hydrates formation and eventually causing a total obstruction. The transient simulations performed with OLGA® were able to predict the condensate and water accumulation rate and holdups along the GEP. The incident described and the subsequent flow assurance study highlight the potential risk of hydrates formation in "dry?? gas pipelines in deep water subsea environment. In subsea gas export lines, the current dryness (dewpoint) contractual requirements agreed upon by the operators are believed to provide safe operating conditions with regard to hydrates. The present work demonstrates that hydrates formation risks remain even when operating within the industry requirements. The remediation strategy adopted after the hydrate blockage, and the prevention measures applied since, provide useful guidelines for the management of hydrates in gas pipelines. Introduction With oil and gas developments moving to ever deeper subsea environments, hydrates-related issues become a growing concern for the industry. Hydrates blockages, beyond the safety risk they represent, result in time-consuming and costly mitigation and remediation operations. Most hydrates experiences found in the literature, and the corresponding prevention and remediation strategies, concern multiphase pipelines. This paper relates a hydrates blockage incident which occurred in January 2007 on a deepwater dry gas pipeline. A detailed review of the events and subsequent remediation actions is given, along with an analysis, including a PVT study and transient multiphase simulations. The lessons learned from this experience are presented here and are currently being used as a basis for improving operation guidelines and hydrates prevention strategies for dry gas deepwater pipelines.
30 May 2020 in International Journal of Recent Technology and Engineering (IJRTE)
Search of sheet metal components along with physical items calls for a good deal of expertise in addition to creating expertise on the part of designers. Lately, different Artificial Intelligence (AI) methods now are being used in sheet metallic labor to minimize complexity; take lower the dependency on male, time and also expertise ingested physical appearance of pieces and expires and additionally to enhance one success. Artificial Neural Network (ANN) method is by using the most effective materials for fixing engineering layout issues and minimizing errors to drop with experimental information within actual physical engineering. This specific investigate documents particulars a substantial comment of applications of ANN strategy to sheet metallic perform how about hand-operated engineering apps. Major printed analysis do inside the domain name of bodily engineering is really summarized. In line with the vital comment of accessible literature, a lot more analysis range is really determined. The present literature analysis uncovers that there's stern need in an attempt that you are able to make use of ANN means to press items style as well as in addition to foresee gear lifetime contained sheet metal industries or perhaps maybe even in for bodily engineering process.
12 January 2022 in International journal of multidisciplinary advanced scientific research and innovation