Agnieszka Greszta

Ms. Agnieszka Greszta

Central Institute for Labour Protection - National Research Institute, Lodz, Poland
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 February 2020 in Materials
Verified
Journal Article
Open access
PDF file
GBGrazyna Bartkowiak
Grazyna Bartkowiak
Anna DąbrowskaAnna Dąbrowska
Anna Dąbrowska
AGAgnieszka Greszta
Agnieszka Greszta
The latest directions of research on the design of protective clothing concern the implementation of smart materials, in order to increase its protective performance. This paper presents results on the resistance to thermal factors such as flames, radiant heat, and molten metals, which were obtained for the developed smart textile material with shape memory alloys (SMAs). The laboratory tests performed indicated that the application of the designed SMA elements in the selected textile material system caused more than a twofold increase in the resistance to radiant heat (RHTI24 = 224 s) with an increase of thickness of 13 mm (sample located vertically with a load), while in the case of tests on the resistance to flames, it was equal to 41 mm (sample located vertically without a load) and in the case of tests on the resistance to molten metal, it was 17 mm (sample located horizontally).

20 March 2022 in Materials
Verified
Journal Article
Open access
PDF file
AGAgnieszka Greszta
Agnieszka Greszta
GBGrazyna Bartkowiak
Grazyna Bartkowiak
Anna DąbrowskaAnna Dąbrowska
Anna Dąbrowska
EGEulalia Gliścińska
Eulalia Gliścińska
WMWaldemar Machnowski
Waldemar Machnowski
PKPawel Kozikowski
Pawel Kozikowski
This study aimed to assess the developed nonwoven inserts with aerogel/PCM (phase change material) microcapsules for use in protective clothing against cold in terms of properties related to thermophysiological comfort. These inserts were obtained by the thermal bonding of a multilayer system consisting of needled-punched nonwovens and silica aerogel particles and/or PCM microcapsules evenly distributed between them. The influence of aerogel and PCM microcapsules on the basic physical properties of inserts, their microstructure, air permeability, and water vapor resistance was investigated and analyzed. The thermal insulation properties of inserts were assessed based on thermal conductivity results. The inserts with PCMs were also tested for their ability to regulate the temperature in the undergarment microclimate using the differential scanning calorimeter (DSC) and the “skin model” device. The research showed that the use of aerogel allowed for reducing the thermal conductivity of the insert by approximately 13% compared to the insert without additives. The high values obtained of the melting and crystallization enthalpy of inserts with PCMs confirmed their high efficiency in the heat absorption and release. Thus, the use of aerogel and PCMs in protective clothing against cold seems to be an effective solution for improving its protective properties and actively adapting its thermal insulation to the changing temperature conditions and the activity level of employees.

1 September 2019 in Microporous and Mesoporous Materials
Verified
Journal Article
Closed access
SKSylwia Krzemińska
Sylwia Krzemińska
AGAgnieszka Greszta
Agnieszka Greszta
Artur RozanskiArtur Rozanski
Artur Rozanski
MSMarta Safandowska
Marta Safandowska
Małgorzata OkrasaMałgorzata Okrasa
Małgorzata Okrasa

1 August 2016 in International Journal of Clothing Science and Technology
Verified
Journal Article
Closed access
Iwona FrydrychIwona Frydrych
Iwona Frydrych
AGAgnieszka Greszta
Agnieszka Greszta
Purpose: – Seam efficiency plays an important role for obtaining a desired seam quality. Therefore, this issue is often referred in research papers. The purpose of this paper is to determine the seam strength and efficiency as well as examining, if and how such factors as: a kind of fabric, kind of thread, kind of seam and the stitch density influence the transverse seam strength and the seam efficiency. Design/methodology/approach: – For research four types of polyester/wool fabrics having different structural parameters and two types of polyester sewing threads were used. Three types of seam were made. The fabric samples were sewn using lockstitch with three different stitch densities. Obtained in this way seams were tested on the tensile machine. The influence of individual factors on the seam strength and its efficiency was assessed statistically using a multivariate variance analysis (ANOVA). Findings: – The findings of this study revealed that the independent variable – stitch density affect significantly of the seam strength as well as its efficiency. Seam strength and seam efficiency values increase with the increase stitch density. Moreover, the variance analysis showed that a kind of fabric also is a statistically significant factor for the seam efficiency and its strength. Furthermore, in the case of seam efficiency it is also important to the stitch direction. However, the study did not show an impact of kind of thread and kind of seam on dependent variables: the seam strength and its efficiency. Research limitations/implications: – Due to the fact that this paper focuses on the seams made only on wool/polyester fabrics with two the most popular weaves, involving only two sewing PES threads, the conclusions presented in this paper are valid only to this assortment and cannot be generalized. Originality/value: – So far, it has not been taken research on the effect of seams with the different number of sewn layers on the seam strength and efficiency. This issue has been taken in this work.

8 April 2019 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
Anna DąbrowskaAnna Dąbrowska
Anna Dąbrowska
AGAgnieszka Greszta
Agnieszka Greszta
The purpose of this study is to analyze the state-of-art knowledge of the use of energy harvesters (EHs) to power the wearables of clothing. The study discusses some examples of clothing with incorporated different types of EHs, harvesting energy from body movement (based on piezoelectric, electromagnetic, and electrostatic phenomena) from temperature differences, as well as from solar radiation. In the performed analysis, particular attention was focused on the design of EHs, their principle of operation, advantages, disadvantages, and restrictions on use. Low energy requirements of wearable electronics (e.g., sensors and diodes) implemented to clothing indicate the possibility of using miniaturized EHs as a power source for such elements. Each of the discussed EH has both disadvantages and advantages. Therefore, the selection of EH should be preceded by a detailed analysis of the conditions of the garment use, its destination, the user’s physical activity, and the energy needs of the electronic devices incorporated in clothing. Despite a variety of research studies aimed at developing new EH, relatively few of them concern their implementation in the structure of clothing and tests of their functionality in the foreseeable conditions of use. In view of the above, these issues have been addressed in this publication based on the available literature.

15 October 2020 in International Journal of Heat and Technology
Verified
Journal Article
Closed access
SKSylwia Krzemińska
Sylwia Krzemińska
AGAgnieszka Greszta
Agnieszka Greszta
PMPamela Miśkiewicz
Pamela Miśkiewicz
The aim of this study was to investigate the effects of aerogel application on the thermal properties of textile packages intended for use in protective clothing. The packages were prepared in the form of removable inserts filled with aerogel, differing in terms of fabric and design. The developed packages were tested for resistance to the three major types of heat: radiant, convective, and contact. The package variant with superior thermal performance was also evaluated for water vapor resistance. The package after incorporation of aerogel was found to approximately double radiant and convective heat resistance, with an approx. eightfold improvement for contact heat at the highest test temperature 250℃. Threshold time increased from (17.7±0.7) s to (139.9±4.9) s for the optimum aerogel-enhanced package variant with the greatest number of pouches, which met the criteria of the highest performance level. The thermal conductivity and thermal resistance of three fabrics selected for testing were tested in order to determine their basic thermal insulation properties. In general, packages containing a larger number of narrower pouches exhibited higher thermal protective performance. The results show that the developed textile packages with aerogel can be successfully used in thermal protective clothing.