Mine rescuers’ heat load under the same physical effort load (25% of the maximal oxygen uptake), using three types of breathing apparatus, in newly developed heat-removing underwear and outerwear was assessed for typical work conditions of mine rescuers, under milder and harsher ambient conditions of 32 and 38 °C, respectively, both at relative humidity of 85% and air velocity of 1.0 m/s. Expending physical effort at the same load while using different kinds of breathing apparatus resulted in a similar heat load. Under both milder and harsher ambient conditions, heat storage and sweating intensity were greater than the average limit value recommended by hygienic standards, which indicates that the use of breathing apparatus significantly hinders heat exchange with the environment. The developed clothing for mine rescuers was highly rated, and was considered by most people to be better than that used currently.

Aerogels are characterized by excellent insulation properties and a good resistance to high and low temperatures. The objective of this study was to investigate the effects of silica aerogel on thermal properties of textile–polymer composites. Aerogel was applied in protective clothing fabric to improve its heat resistance. The composites were produced by coating a fabric made of meta-aramid (polyamide–imide) yarns with a dispersion of polychloroprene latex and synthetic resins or an acrylic–styrene dispersion with aerogel (100–700 μm particle size). The composites were subjected to thermal radiation (20 kW/m²) and their thermal properties were determined by thermogravimetry/derivative thermogravimetry (TG/DTG). Scanning electron microscopy/X-ray energy dispersive spectroscopy (SEM/EDS) was used to characterize the microstructure and study the elemental composition of materials. The thermal conductivity and resistance of composites were measured with an Alambeta apparatus. The tests indicated an increase in resistance to thermal radiation by approximately 15–25%. In TG/DTG analysis, the initial temperature for an unmodified fabric was 423.3°C. After modification, it decreased to 361.8° and 365.3°C for composites with 7 and 14% of aerogel, respectively. SEM images revealed a reduction in aerogel particle size.

Objective: The aim of this study was to compare the impact of type 2 diabetes on quality of life (QoL), taking into account gender differences in relation to individual domains of Diabetes-Related Quality of Life Audit (ADDQoL) in adult men and women in Poland, the Czech Republic and Republic...