Masonry structures are buildings whose load-bearing system consists of vertical walls made of different units such as bricks, aerated concrete or natural stones. Masonry structures are quite common because they can be built quickly and economically with the use of local materials without requiring skilled labor. In the design of masonry structures and in the analyses of existing masonry structures, it is very important to determine the mechanical properties of the material accurately and to use them in the calculation models created with the micro model technique. In this study, the mechanical behaviour of hollow brick, clay brick and aerated concrete masonry units under uniaxial compressive loading was investigated experimentally for the purpose of masonry analysis. Using the experimental results, the concrete damage plasticity (CDP) model is proposed for the clay-based brick material for applications to be analysed by micro modelling technique in finite element software. The method used in the study will provide light for experimental studies to be carried out to determine the mechanical properties of different types of masonry units and to reflect them to the analysis models.
29 December 2025 in Journal of Building Engineering
This study presents an analytical investigation and a parametric evaluation of the structural behavior and seismic performance of highly corroded reinforced concrete (RC) columns, based on previously conducted experimental studies by the authors. In the analytical phase, moment–curvature relationships were obtained by considering the deterioration of the mechanical properties of both concrete and reinforcing steel due to corrosion in RC column specimens. By linking the sectional moment–curvature response with the element-level behavior observed in the experimental program, the plastic hinge lengths and rotational capacities of the corroded RC columns were determined. Subsequently, a parametric study was carried out using the analytical framework developed in the first phase on a set of 48 RC column models. In this investigation, axial load ratio, concrete compressive strength, corrosion level, section type, and concrete cover depth were considered as key parameters. The results of the combined experimental and analytical investigations demonstrate that the adopted section analysis approach successfully captures the nonlinear flexural behavior observed in the corroded specimens and provides a reliable basis for evaluating the structural performance and for supporting the assessment of seismic performance of deteriorated RC columns.