The effect of ether-functionalisation on ionic liquids (ILs) is discussed based on Kamlet–Taft parameters and the infrared (IR) spectra of N-ethoxyethyl-N-methylpiperidinium bis(trifluoromethanesulfonyl)imide ([P1,2O2][TFSI]) and N-ethoxyethyl-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide ([M1,2O2][TFSI]). The results are analysed taking into consideration their ion conformers, electronegativity and hardness, and the IR active vibrations obtained by means of DFT calculations. From the evaluation of Kamlet–Taft parameters, the ether-functionalisation in the cationic ring is found to improve the polarity and hydrogen bond acidity of the ILs. This correlates with the computational result which designates that the oxygen atom in the cationic ring increases the electronegativity of the cation. The comparison with the IR spectra, which were obtained experimentally and computationally, revealed that trans-[TFSI] was preferably formed in [M1,2O2][TFSI] compared to [P1,2O2][TFSI]. Although the Kamlet–Taft parameters indicate that [M1,2O2][TFSI] has a higher polarity, this IL preferably adopts trans-[TFSI], which is normally stabilised with the cations having a lower polarity. This may be due to the presence of the oxygen in the cationic ring which delocalises the electron density of the lowest unoccupied molecular orbitals (LUMO) and increases the conformational freedom of the hydrogen bonds between cations and anions. Moreover, the mixtures of pure ILs with a suitable Li-salt were also investigated to analyze the effect of the Li salt on the polarity and the ion conformers.
Organic–inorganic hybrid electrolytes based on Al-doped Li7La3Zr2O12 (LLZO) and two different ionic liquids (ILs), namely N-ethoxyethyl-N-methylpiperidinium bis(fluorosulfonyl)imide (FSI IL) and N-ethoxyethyl-N-methylpiperidinium difluoro(oxalato)borate (DFOB IL), were prepared with the aim of improvement of inherent flexibilities of inorganic solid electrolytes. The composites were evaluated in terms of thermal, spectroscopical, and electrochemical properties. In the impedance spectra of LLZO composites with 15 wt% ILs, a semi-circle due to grain boundary resistances was not observed. With the sample merely pressed with 1 ton, without any high-temperature sintering process, the ionic conductivity of 10−3 S cm−1 was achieved at room temperature. Employing a ternary composite of LLZO, FSI IL, and LiFSI as an electrolyte, all-solid-state lithium metal batteries having LiFePO4 as a cathode were assembled. The cell exhibited a capacity above 100 mAh g−1 throughout the course of charge–discharge cycle at C/20. This confirms that FSI IL is an effective additive for inorganic solid electrolytes, which can guarantee the ion conduction.