Black diamond is obtained by a controlled nanoscale periodic texturing of CVD diamond surface, able to drastically modify the interaction with solar radiation from optical transparency up to solar absorptance values even >90%. Surface texturing, performed by the use of an ultra-short pulse laser, is demonstrated to induce an intermediate band within the diamond bandgap supporting an efficient photoelectronic conversion of sub-bandgap photons (<5.5 eV). The intermediate band introduction results in an external quantum efficiency enhanced up to 800 nm wavelengths (and up two orders of magnitude larger than the starting transparent diamond film), without affecting the film transport capabilities. The optical and photoelectronic outstanding results open the path for future application of black diamond as a photon-enhanced thermionic emission cathode for solar concentrating systems, with advantages of excellent electronic properties combined with a potentially very low work function and high thermal stability
A laser-induced periodic surface structure (LIPSS) has been fabricated on polycrystalline diamond by an ultrashort Ti:Sapphire pulsed laser source (λ = 800 nm, P = 3 mJ, 100 fs) in a high vacuum chamber (<10−7 mbar) in order to increase diamond absorption in the visible and infrared wavelength ranges. A horizontally polarized laser beam had been focussed perpendicularly to the diamond surface and diamond target had been moved by an automated X–Y translational stage along the two directions orthogonal to the optical axis. Scanning electron microscopy of samples reveals an LIPSS with a ripple period of about 170 nm, shorter than the laser wavelength. Raman spectra of processed sample do not point out any evident sp2 content, and diamond peak presents a right shift, indicating a compressive stress. The investigation of optical properties of fs-laser surface textured diamond is reported. Spectral photometry in the range 200/2,000 nm wavelength shows a significant increase of visible and infrared absorption (more than 80 %) compared to untreated specimens (less than 40 %). The analysis of optical characterization data highlights a close relationship between fabricated LIPSS and absorption properties, confirming the optical effectiveness of such a treatment as a light-trapping structure for diamond: these properties, reported for the first time, open the path for new applications of CVD diamond.
15 November 2018 in ACS Applied Materials & Interfaces
Diamond is known as a promising electrode material in the fields of cell stimulation, energy storage (e.g. supercapacitors), (bio)sensing, catalysis, etc. However, engineering its surface and electrochemical properties often require costly and complex procedures with addition of foreign material (e.g. carbon nanotube or polymer) scaffolds or cleanroom processing. In this work, we demonstrate a novel approach using laser-induced periodic surface structuring (LIPSS) as a scalable, versatile and cost-effective technique to nanostructure the surface and tune the electrochemical properties of boron-doped diamond (BDD). We study the effect of LIPSS on heavily doped BDD and investigate its application as electrodes for cell stimulation and energy storage. We show that quasi-periodic ripple structures formed on diamond electrodes laser-textured with a laser accumulated fluence of 0.325 kJ/cm2 (800 nm wavelength) displayed a much higher double-layer capacitance of 660 µF/cm2 than the as-grown BDD (20 µF/cm2), and that an increased charge storage capacity of 1.6 mC/cm2 (>6-fold increase after laser texturing) and the low impedance of 2.74 Ωcm2 turn out to be appreciable properties for cell stimulation. Additional morphological and structural characterisation revealed that ripple formation on heavily boron-doped diamond (2.8 at.% [B]) occurs at much lower accumulated fluences than the 2 kJ/cm2 typically reported for lower doping levels, and that the process involves stronger graphitisation of the BDD surface. Finally, we show that the exposed interface between the sp2 and sp3 carbon layers (i.e. the laser-ablated diamond surface) revealed faster kinetics than the untreated BDD in both ferrocyanide and RuHex mediators, which can be used for electrochemical (bio)sensing. Overall, our work demonstrates that LIPSS is a powerful single-step tool for the fabrication of surface-engineered diamond electrodes with tuneable material, electrochemical and charge storage properties.