André F. Sartori

André F. Sartori

Auto-generated profile, based on publicly available information

André F. Sartori

Department of Precision and Microsystems Engineering Delft University of Technology Mekelweg 2 2628 CD Delft The Netherlands

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2018 in ACS Applied Materials & Interfaces
Verified
Journal Article
Open access
ASAndré F. Sartori
André F. Sartori
SOStefano Orlando
Stefano Orlando
Alessandro BellucciAlessandro Bellucci
Alessandro Bellucci
DTDaniele Trucchi
Daniele Trucchi
SAShoshan Abrahami
Shoshan Abrahami
Josephus BuijnstersJosephus Buijnsters
Josephus Buijnsters
Diamond is known as a promising electrode material in the fields of cell stimulation, energy storage (e.g. supercapacitors), (bio)sensing, catalysis, etc. However, engineering its surface and electrochemical properties often require costly and complex procedures with addition of foreign material (e.g. carbon nanotube or polymer) scaffolds or cleanroom processing. In this work, we demonstrate a novel approach using laser-induced periodic surface structuring (LIPSS) as a scalable, versatile and cost-effective technique to nanostructure the surface and tune the electrochemical properties of boron-doped diamond (BDD). We study the effect of LIPSS on heavily doped BDD and investigate its application as electrodes for cell stimulation and energy storage. We show that quasi-periodic ripple structures formed on diamond electrodes laser-textured with a laser accumulated fluence of 0.325 kJ/cm2 (800 nm wavelength) displayed a much higher double-layer capacitance of 660 µF/cm2 than the as-grown BDD (20 µF/cm2), and that an increased charge storage capacity of 1.6 mC/cm2 (>6-fold increase after laser texturing) and the low impedance of 2.74 Ωcm2 turn out to be appreciable properties for cell stimulation. Additional morphological and structural characterisation revealed that ripple formation on heavily boron-doped diamond (2.8 at.% [B]) occurs at much lower accumulated fluences than the 2 kJ/cm2 typically reported for lower doping levels, and that the process involves stronger graphitisation of the BDD surface. Finally, we show that the exposed interface between the sp2 and sp3 carbon layers (i.e. the laser-ablated diamond surface) revealed faster kinetics than the untreated BDD in both ferrocyanide and RuHex mediators, which can be used for electrochemical (bio)sensing. Overall, our work demonstrates that LIPSS is a powerful single-step tool for the fabrication of surface-engineered diamond electrodes with tuneable material, electrochemical and charge storage properties.

19 December 2018 in Small
Verified
Journal Article
Open access
PDF file
ASAndré F. Sartori
André F. Sartori
PBPierpaolo Belardinelli
Pierpaolo Belardinelli
RDRobin Dolleman
Robin Dolleman
PSPeter G. Steeneken
Peter G. Steeneken
MGMurali Krishna Ghatkesar
Murali Krishna Ghatkesar
Josephus BuijnstersJosephus Buijnsters
Josephus Buijnsters
Diamond is a highly desirable material for state‐of‐the‐art micro‐electromechanical (MEMS) devices, radio‐frequency filters and mass sensors, due to its extreme properties and robustness. However, the fabrication/integration of diamond structures into Si‐based components remain costly and complex. In this work, a lithography‐free, low‐cost method is introduced to fabricate diamond‐based micro‐resonators: a modified home/office desktop inkjet printer is used to locally deposit nanodiamond ink as ∅50–60 µm spots, which are grown into ≈1 µm thick nanocrystalline diamond film disks by chemical vapor deposition, and suspended by reactive ion etching. The frequency response of the fabricated structures is analyzed by laser interferometry, showing resonance frequencies in the range of ≈9–30 MHz, with Q ‐factors exceeding 10 4 , and ( f 0 × Q ) figure of merit up to ≈2.5 × 10 11 Hz in vacuum. Analysis in controlled atmospheres shows a clear dependence of the Q ‐factors on gas pressure up until 1 atm, with Q ∝ 1/ P . When applied as mass sensors, the inkjet‐printed diamond resonators yield mass responsivities up to 981 Hz fg −1 after Au deposition, and ultrahigh mass resolution up to 278 ± 48 zg, thus outperforming many similar devices produced by traditional top‐down, lithography‐based techniques. In summary, this work demonstrates the fabrication of functional high‐performance diamond‐based micro‐sensors by direct inkjet printing.

15 October 2022 in Carbon
Verified
Journal Article
Open access
ZLZhichao Liu
Zhichao Liu
SBSimona Baluchová
Simona Baluchová
ASAndré F. Sartori
André F. Sartori
ZLZiyu Li
Ziyu Li
YGYaiza Gonzalez-Garcia
Yaiza Gonzalez-Garcia
Josephus BuijnstersJosephus Buijnsters
Josephus Buijnsters