Due to their widespread and continuous expansion, transportation networks are considerably exposed to natural hazards such as earthquakes, floods, landslides or hurricanes. The vulnerability of specific segments and structures among bridges, tunnels, pumps or storage tanks can translate not only into direct losses but also into significant indirect losses at the systemic level. Cascading effects such as post-event traffic congestion, building debris or tsunamis can contribute to an even greater level of risk. To support the effort of modeling the natural hazards' implications at the full transportation network scale, we developed a new applicable framework, relying on (i) GIS to define, analyze and represent transportation networks; (ii) methods for determining the probability of network segments to fail due to natural-hazard effects; (iii) Monte Carlo simulation for multiple scenario generation; (iv) methods to analyze the implications of connectivity loss on emergency intervention times and transit disruption; and (v) correlations with other vulnerability and risk indicators. Currently, the framework is integrated into ArcGIS Desktop as a toolbox entitled “Network-risk”, which makes use of the ModelBuilder functions and is free to download and modify. Network-risk is an attempt to bring together interdisciplinary research with the goal of creating an automated solution to deliver insights on how a transportation network can be affected by natural hazards, directly and indirectly, assisting in risk evaluation and mitigation planning. In this article we present and test Network-risk at the full urban scale for the road network of Bucharest. This city is one of Europe's most exposed capitals to earthquakes, with high seismic-hazard values and a vulnerable building stock but also significant traffic congestion problems not yet accounted for in risk analyses and risk reduction strategies.
The Internet of things concept empowered by low-cost sensor technologies and headless computers has upscaled the applicability of vibration monitoring systems in recent years. Raspberry Shake devices are among those systems, constituting a crowdsourcing framework and forming a worldwide seismic network of over a thousand nodes. While Raspberry Shake devices have been proven to densify seismograph arrays efficiently, their potential for structural health monitoring (SHM) is still unknown and is open to discovery. This paper presents recent findings from existing buildings located in Bucharest (Romania) equipped with Raspberry Shake 4D (RS4D) devices, whose signal recorded under multiple seismic events has been analyzed using different modal identification algorithms. The obtained results show that RS4D modules can capture the building vibration behavior despite the short-duration and low-amplitude excitation sources. Based on 15 RS4D device readings from five different multistorey buildings, the results do not indicate damage in terms of modal frequency decay. The findings of this research propose a baseline for future seismic events that can track the changes in vibration characteristics as a consequence of future strong earthquakes. In summary, this research presents multi-device, multi-testbed, and multi-algorithm evidence on the feasibility of RS4D modules as SHM instruments, which are yet to be explored in earthquake engineering.
The paper presents results from an experimental program implemented for three representative buildings in Bucharest metropolitan area and aimed to explore the potential of various dynamic identification methods in providing information about building state changes. The objective is to establish reference values of potential use in rapid earthquake damage detection systems. Each of the selected buildings was designed according to a different seismic code, in force at the time of its construction. The methods employed for this study were: the analysis of Fourier spectra, the analysis of the transfer function and the random decrement technique. To validate the results, the fundamental periods of vibration determined experimentally were compared with the corresponding values predicted by the empirical formulas specified in the corresponding editions of the Romanian seismic code. The results revealed consistent values for both the fundamental period and the damping ratio of the buildings. However, small variations of the two parameters were identified, depending on the time the recordings were performed, noise sources and levels and building occupancy. The results, in terms of validated data on the dynamic characteristics of Romanian building stock and of assessment of methods performance, add up to the information pool needed for the development of countrywide pre- and post-earthquake assisted decision tools.
The real‐time analysis of a structure’s integrity associated with a process to estimate damage levels improves the safety of people and assets and reduces the economic losses associated with interrupted production or operation of the structure. The appearance of damage in a building changes its dynamic response (frequency, damping, and/or modal shape), and one of the most effective methods for the continuous assessment of integrity is based on the use of ambient vibrations. However, although resonance frequency can be used as an indicator of change, misinterpretation is possible since frequency is affected not only by the occurrence of damage but also by certain operating conditions and particularly certain atmospheric conditions. In this study, after analyzing the correlation of resonance frequency values with temperature for one building, we use the data mining method called “association rule learning” (ARL) to predict future frequencies according to temperature measurements. We then propose an anomaly interpretation strategy using the “traffic light” method.
After the World Health Organization declared COVID-19 a pandemic in March 2020, Romania followed the example of many other countries and imposed a series of restrictive measures, including restricting people's mobility and closing social, cultural, and industrial activities to prevent the spread of the disease. In this study, we analyze continuous vertical component recordings from the stations of the Romanian Seismic Network – one of the largest networks in Europe, consisting of 148 stations – to explore the seismic noise variation associated with the reduced human mobility and activity due to the Romanian measures against COVID-19 in detail. We focused our investigation on four frequency bands – 2–8, 4–14, 15–25 and 25–40 Hz – and found that the largest reductions in seismic noise associated with the lockdown correspond to the high-frequency range of 15–40 Hz. We found that all the stations with large reductions in seismic noise ( 40 %) are located inside and near schools or in buildings, indicating that at these frequencies the drop is related to the drastic reduction of human activity in these edifices. In the lower-frequency range (2–8 and 4–14 Hz) the variability of the noise reduction among the stations is lower than in the high-frequency range, corresponding to about 35 % on average. This drop is due to reduced traffic during the lockdown, as most of the stations showing such changes in seismic noise in these bands are located within cities and near main or side streets. In addition to the noise reduction observed at stations located in populated areas, we also found seismic noise lockdown-related changes at several stations located far from urban areas, with movement of people in the vicinity of the station explaining the noise reductions.