We present an experimental and simulation-based study on ion beam deflection in laser-matter interactions conducted at the PHELIX facility. The experiment was performed using a main pulse (1053 nm, 500 fs) reaching peak intensities of ∼1.5×1021 W cm−2, and a pre-pulse (1053 nm, either 1 or 3 ns) with an intensity ranging from 6.4×1013 to 1.2×1015 W cm−2. The laser was incident on a 5 μm thick carbon foil under an angle of 25° relative to the target normal. Systematic variation of the pre-pulse delay (0–3 ns) revealed significant target deformation effects, leading to ion beam deflection and a reduction of the ion cutoff energies with increasing delay between the pre-pulse and the main pulse. The pre-plasma dynamics were characterized using side-view interferometry in combination with a synchronized picosecond probe beam. Hydrodynamic simulations with FLASH-2D were adapted to match the interferometric measurements by adjusting laser energy and focus size. The simulations confirm that the observed beam deflection originates from pre-pulse-induced target deformation and expansion. Our results demonstrate that ion beam directionality can be controlled via pre-pulse parameters, providing a pathway for optimizing laser-driven ion acceleration schemes. These findings highlight the importance of precisely adapted pre-plasma conditions in high-intensity laser-plasma interactions and their impact on acceleration dynamics.
High-repetition-rate targets present an opportunity for developing diagnostic tools for on-demand calibration at high-power laser facilities for consistent performance and reproducibility during experimental campaigns. The non-linear change in transmission associated with a laser-driven plasma mirror, based on high-repetition rate targets, has been used in a Frequency Resolved Optical Gating (FROG) configuration to analyze the spectral phase for near-infrared pulses far from the Fourier limit. Three types of targets were compared for characterizing pulses in the 1–8 ps range: a glass slide, a polymer tape, and a thin liquid sheet created by two impinging micrometer-scale jets. The thin liquid film had the best mechanical stability and introduced the least spectral distortion, allowing the most robust reconstruction of the temporal intensity profile. The spectral phase was reconstructed using a non-iterative algorithm, which reproduced the second-order phase distortions induced with an acousto-optic programmable dispersive filter with an RMS error of 6.2%, leading to measured pulse durations with an RMS deviation ranging from 1% for pulses of 6.8–7.8 ps up to 7.5% for pulses around 1 ps.
1 June 2026 in Machine Learning: Science and Technology
We present a hybrid self-supervised model that integrates a convolutional autoencoder with a Guassian mixture model (GMM) to classify and reconstruct real petawatt laser beam profiles. The model distinguishes between near-field, far-field, and multi-spot beam profiles, demonstrating that self-supervised representations can extract physically meaningful features from unlabeled experimental laser data sets. We achieve % classification accuracy on our baseline model, improving the previously unsupervised baseline of %, under comparable experimental conditions. The integration of a probabilistic layer GMM enables more precise clustering of laser beam profiles, achieving 98.9% classification accuracy. Designed for an inference speed up to 1 Hz for live diagnostics on the ELI-NP high power laser system, our architecture enables real-time state detection. Importantly, we show that high classification performance can emerge even when pixel-level reconstructions are imperfect, indicating that the learned latent representations prioritize physically meaningful structure over image fidelity.
A technique developed to accurately simulate the amplification of back-reflected light through a multi-petawatt laser system is presented. Using the Frantz–Nodvik equation, we developed an iterative algorithm to simulate the amplification of the main beam as it propagates through solid-state multipass amplifiers, while also accounting for back-reflections from experimental targets and the residual gain within the crystals. Our technique builds on the theoretical model by estimating the energy levels after multiple passes through all amplifiers and refining the simulated data using a brute-force optimization algorithm. We also demonstrate an application of this tool aimed at evaluating machine safety: optimizing the laser system to minimize crystal gain in the post-pulse regime and, consequently, the amplification of back-reflections, while taking advantage of the B-integral.
3 August 2026 in High Power Laser Science and Engineering
Accurate spatio-temporal and spatio-spectral metrology is critical to the characterization and use of ultra-short, high-power lasers. The emergence of few-cycle pulses, with bandwidths of tens or hundreds of nanometers, poses a significant challenge to existing metrology techniques. This is due to a combination of large discrepancies in sensor sensitivity and significant variations in the pulse’s spectral intensity at those wavelengths. In this paper, the authors propose spectral filtering and stitching of the measurements as a robust, simple solution that enhances the dynamic range of the measurements, allowing accurate few-cycle pulse reconstruction. This enhancement is demonstrated using INSIGHT – the most commonly used spatio-spectral measurement device – as well as using the IMPALA technique and spatially resolved Fourier transform spectrometry.