Photovoltaic (PV) power grid-connected systems have the advantages of being prompt and reliable supplies of electrical power. Nevertheless, the installation and operation requirements from the grid side have to be fulfilled in order to guarantee the security of the PV system technicians and the efficiency of the power system. Particularly, the potential for “islanding” is one of the dreads that are brought about by PV grid-connected systems. To be able to tackle these concerns, this paper investigates recent islanding detection techniques and topologies for PV systems. Active islanding detection techniques apply regular disturbances to the inverter system and then analyze the output voltage or frequency to investigate the islanding and stability of the grid. If the injected disturbances influence the load voltage or frequency, the controller forces the intermediate inverter to stop sending power to the connected load. In addition, several islanding detection techniques that inject a periodical signal to the reference current that causes a change in the magnitude of inverter output voltage when islanding happens in a three-phase photovoltaic grid-connected system are discussed. The validity of the proposed technique is tested and verified through PSIM software.
This work presents an alternative to the conventional photovoltaic maximum power point tracking (MPPT) methods, by using an opposition-based learning firefly algorithm (OFA) that improves the performance of the Photovoltaic (PV) system both in the uniform irradiance changes and in partial shading conditions. The firefly algorithm is based on fireflies’ search for food, according to which individuals emit progressively more intense glows as they approach the objective, attracting the other fireflies. Therefore, the simulation of this behavior can be conducted by solving the objective function that is directly proportional to the distance from the desired result. To implement this algorithm in case of partial shading conditions, it was necessary to adjust the Firefly Algorithm (FA) parameters to fit the MPPT application. These parameters have been extensively tested, converging satisfactorily and guaranteeing to extract the global maximum power point (GMPP) in the cases of normal and partial shading conditions analyzed. The precise adjustment of the coefficients was made possible by visualizing the movement of the particles during the convergence process, while opposition-based learning (OBL) was used with FA to accelerate the convergence process by allowing the particle to move in the opposite direction. The proposed algorithm was simulated in the closest possible way to authentic operating conditions, and variable irradiance and partial shading conditions were implemented experimentally for a 60 [W] PV system. A two-stage PV grid-connected system was designed and deployed to validate the proposed algorithm. In addition, a comparison between the performance of the Perturbation and Observation (P&O) method and the proposed method was carried out to prove the effectiveness of this method over the conventional methods in tracking the GMPP.
Since the lifespan of an electrolytic capacitor is relatively short compared to other power semiconductor devices, the failure rate accounts for 60% and, thus, it is the most vulnerable component of the power conversion device. Therefore, the accurate measurement of the lifetime of an electrolytic capacitor is very important in ensuring the reliability of the entire system, including the capacitor. In this paper, an online failure detection method for a DC-link electrolytic capacitor in a back-to-back Pulse width Modulation (PWM) converter using the opposition-based learning particle swarm optimization-based Support Vector Regression (OPSO-SVR) technique is proposed. In this method, the capacitance and the DC-link capacitor power have been used in offline mode for SVR training and testing. During the offline mode, the SVR parameters have been optimized with the OPSO algorithm to use online to estimate the real value of the DC-link capacitor. The experimental results prove the superiority of the proposed technique over the SVR.
This paper investigates the energy performance of new design air-conditioning system combined with energy audit in KSA governmental building since air conditioning is responsible for more than 60 % of electricity consumption. Alternative solutions are provided. Based on the results, the old conditioners will be replaced for 113 rooms in three floors of the MUAB. The applied methodology uses Wireless Sensor and Actuator Networks (WSAN) for sensing and measuring technique characteristics of the conditioners and compares them with the ones available on the market, which were selected according to ASHRAE Standard 62.1-2007 specified by the manufacturers. Energy balance examination proves that operational conditioners have greater electric consumption and power factor comparing to the known standards. Energy audit applied in the MUAB provided a saving of 10% in the average consumption of electric energy. More than that an exploration is performed to insert Stirling engine in air conditioning cycle proving that it can be a promoted solution and can reduce significantly energy consumption; an alpha Stirling engine has been tested numerically for the same temperature and pressure reigned in the refrigeration cycle proving that it can work with energy efficiency around 42%.
14 March 2025 in Clean Energy Science and Technology
The growing global demand for electricity necessitates efficient renewable energy solutions, with photovoltaic (PV) systems emerging as a prominent candidate. This study presents a novel hybrid Maximum Power Point Tracking (MPPT) algorithm that integrates the Artificial Bee Colony (ABC) optimization method with the Incremental Conductance (IC) technique, ensuring 100% accurate identification of the Global Maximum Power Point (GMPP) under partial shading conditions. Unlike standalone MPPT methods, the proposed approach leverages the exploratory capabilities of ABC for global search while utilizing IC for fast and precise tracking, achieving a convergence time of 0.37 s and minimal power oscillations of 2.7%. Experimental validation demonstrates the algorithm’s superior performance, attaining 100% efficiency, significantly outperforming standalone IC (74%) and ABC (99.5%) methods. The hybrid ABC-IC algorithm consistently tracks the GMPP, delivering 60 W under optimal irradiation (1000 W/m2) and surpassing conventional techniques such as P&O, FA, and PSO in terms of convergence speed, robustness, and adaptability to dynamic shading conditions. This innovative integration of bio-inspired and deterministic MPPT strategies offers a highly efficient and reliable solution for maximizing PV energy harvesting in real-world environments.