Plasmonic immunosensors are usually made of a noble metal (in the form of a film or nanoparticles) on which bioreceptors are grafted to sense analytes based on the antibody/antigen or other affinity mechanism. Optical fiber configurations are a miniaturized counterpart to the bulky Kretschmann prism and allow easy light injection and remote operation. To excite a surface plasmon (SP), the core-guided light is locally outcoupled. Unclad optical fibers were the first configurations reported to this end. Among the different architectures able to bring light in contact with the surrounding medium, a great quantity of research is today being conducted on metal-coated fiber gratings photo-imprinted in the fiber core, as they provide modal features that enable SP generation at any wavelength, especially in the telecommunication window. They are perfectly suited for use with cost-effective high-resolution interrogators, allowing both a high sensitivity and a low limit of detection to be reached in immunosensing. This paper will review recent progress made in this field with different kinds of gratings: uniform, tilted and eccentric short-period gratings as well as long-period fiber gratings. Practical cases will be reported, showing that such sensors can be used in very small volumes of analytes and even possibly applied to in vivo diagnosis.
Real-time and high-sensitivity monitoring of heavy metal ions in solution is of great significance in environmental monitoring. Traditional electrochemical methods suffer from electrochemical noise and environmental interferences for heavy metal trace detection. To address these issues, we propose a novel electrochemical surface plasmon resonance (EC-SPR) optical fiber sensor. The sensor comprises a tilted fiber Bragg grating imprinted in a commercial single-mode fiber and coated with a nanoscale gold film for high-efficiency SPR excitation. The gold coated optical fiber serves as working electrode, performing the dual functions of anodic stripping voltammetry and SPR optical sensing. We demonstrate detection of Pb2+ as an example of a typical heavy metal ion. We show a stable and reproducible correlation between the real-time ion deposition-stripping cycles and the optical transmission of the optical fiber, with a limit of detection of 10-10 M and a dynamic range of nearly five orders of magnitude. Moreover, by taking derivative of the SPR amplitude change, we can clearly identify the peak stripping potential of the detected ions and therefore realize specific ion identification. The method proposed is inherently immune to temperature cross-talk because the core mode is temperature-dependent but insensitive to surrounding media. The proposed EC-SPR fiber-optic sensor has the advantages of compact size, flexible shape and remote operation capability, thereby opening the way for other opportunities for electrochemical monitoring in various hard-to-reach locations and remote environments.
Environmental monitoring and potable water control are key applications where optical fiber sensing solutions can outperform other technologies. In this work, we report a highly sensitive plasmonic fiber-optic probe that has been developed to determine the concentration of cadmium ions (Cd2+) in solution. This original sensor was fabricated by immobilizing the Acinetobacter sp. around gold-coated tilted fiber Bragg gratings (TFBGs). To this aim, the immobilization conditions of bacteria on the gold-coated optical fiber surface were first experimentally determined. Then, the coated sensors were tested in vitro. The relative intensity of the sensor response experienced a change of 1.1 dB for a Cd2+ concentration increase from 0.1 to 1000 ppb. According to our test procedure, we estimate the experimental limit of detection to be close to 1 ppb. Cadmium ions strongly bind to the sensing surface, so the sensor exhibits a much higher sensitivity to Cd2+ than to other heavy metal ions such as Pb2+, Zn2+ and CrO42− found in contaminated water, which ensures a good selectivity.