In this article, millimeter-wave (mmWave) wireless channel characteristics (Doppler spread and path loss modeling) for unmanned aerial vehicle (UAV)-assisted communication is analyzed and studied by emulating the real UAV motion using a robotic arm. The motion considers the actual turbulence caused by the wind gusts to the UAV in the atmosphere, which is statistically modeled by the widely used Dryden wind model. The frequency under consideration is 28 GHz in an anechoic chamber setting. A total of 11 distance points from 3.5 to 23.5 ft in increments of 2 ft were considered in this experiment. At each distance point, three samples of data were collected for better inference purposes. In this emulated environment, it was found out that the average Doppler spread at these different distances was around −20 and +20 Hz at the noise floor of −60 dB. On the other hand, the path loss exponent was found to be 1.843. This study presents and lays out a novel framework of emulating UAV motion for mmWave communication systems, which will pave the way out for future design and implementation of next-generation UAV-assisted wireless communication systems.
Most of the research in cognitive radio field is primarily focused on finding and improving secondary user (SU) performance parameters such as bit error rate, outage probability and capacity etc. Less attention is being paid towards the other side of the network that is the primary network which is under interference from SU. Also, it is the primary user (PU) that decides upon the interference temperature constraint for power adaptation to maintain a certain level of quality of service while providing access to SUs. However, given the random nature of wireless communication, interference temperature can be regulated dynamically to overcome the bottlenecks in entire network performance. In order to do so, we need to analyze the primary network carefully. This study tries to fill this gap by analytically finding the closed form theoretical expressions for signal to interference and noise ratio (SINR), mean SINR, instantaneous capacity, mean capacity and outage probability of PU, while taking peak transmit power adaptation at SU into picture. Furthermore, the expressions generated are validated with the simulation results and it is found that our theoretical derivations are in perfect accord with the simulation outcomes.
The use of multiple channels often increases the capacity of a wireless network, especially, if those channels are orthogonal. However, the challenge lies when we have more nodes than the available orthogonal channels. The 802.11n, 2.4 GHz WLAN has 3 orthogonal channels and 8 partially overlapping channels. These numbers of orthogonal channels put a limitation on the channel usage in a network and thus affect the overall network capacity. To overcome this degradation of network capacity with such limited channel scenario, we must focus on the transmission power of these nodes. In this paper, we describe a smart algorithm with realistic formulation, which divides the complex channel assignment and power optimization problem into two separate solution sets. First solution set solves the channel assignment problem in access points of the 802.11 infrastructure based network utilizing both orthogonal and overlapping channels and the second solution set improves the throughput of the network by optimizing the transmission power of these nodes. We selected optimal channel and transmission power assignment using the algorithm, and then ran simulations on a set of multi-AP WLAN. Experimental results show an improvement of approximately 14% in the throughput of infrastructure based 802.11n WLAN compared to previous work.
In this study, we describe the behavior of LTE over the sea and investigate the problem of radio resource block allocation in such SINR limited maritime channels. For simulations of such sea environment, we considered a network scenario of Bosphorus Strait in Istanbul, Turkey with different number of ships ferrying between two ports at a given time. After exploiting the network characteristics, we formulated and solved the radio resource allocation problem by max-min integer linear programming method. The radio resource allocation fairness in terms of Jain's fairness index was computed and it was compared with round robin and opportunistic methods. Results show that the max-min optimization method performs better than the opportunistic and round robin methods. This result in turn reflects that the max-min optimization method gives us the high minimum best throughput as compared to other two methods considering different ship density scenarios in the sea. Also, it was observed that as the number of ships begin to increase in the sea, the max-min method performs significantly better with good fairness as compared to the other two methods.
In this paper, an extended reduced-rank direction-of-arrival (DOA) estimation with unknown mutual coupling in uniform linear array (ULA) structure is presented. The proposed method is based on the joint iterative subspace optimization (JIO) and the auto-calibration of mutual coupling. Given an initial coupling vector, reduced-rank correlation matrix is estimated with the JIO approach, followed by iterative joint estimation of DOA and coupling with an auto-calibration algorithm. Simulation results show that both the proposed method and the existing auto-calibration method have similar performance in terms of DOA root mean square error, while the complexity of the proposed method is much lower than that of the auto-calibration approach due to the reduced rank.