Worldwide, there has been an exponential growth in the production and application of lithium-ion batteries (LIBs), driven by the energy transition and the electric vehicle market. The scarcity of raw materials and the circular economy strategy of LIBs encourage the need to reuse components, recycle, and give second life to used batteries. However, one of the obstacles is the insufficient volume of LIBs for recycling, which prevents the economic viability of this industrial process. Thus, this article mainly focuses on the economic aspects of the recycling of LIBs, presenting and analyzing: (i) the advantages and disadvantages of recycling and (ii) a survey of factors that influence the cost and economic feasibility of disposing of batteries. The importance of regulations, the market, and business models regarding the recycling of LIBs in a few countries are also discussed. Finally, a business model is created for recycling LIBs in Brazil. The main factors that influence the economic feasibility of this process are indicated, such as government incentives through regulation, exemption from fees and taxes, and the adequacy of battery technology. Encouraging recycling through tax exemptions or reductions can make the process more economically viable, in addition to contributing to the circular economy. Another essential factor to be considered is the creation of joint ventures, which can facilitate the entire chain of the circular economy, including logistics, transport, and disposal of batteries.
This research addresses strategic recommendations regarding the applications of battery energy storage systems (BESS) in the context of the deregulated electricity market. The main emphasis is on regulatory dimensions, incentive mechanisms, and the provision of marketable storage services. The study’s findings demonstrate that battery energy storage systems (BESS) have distinct characteristics that challenge their conventional classification as a load or generator within power systems. The study additionally emphasizes the insights, lessons learned, and good practices gained from early adopter countries in implementing energy storage systems (ESS). These insights include the importance of establishing a precise definition of ESS, promoting collaborative engagement with relevant stakeholders, and developing a series of incentive strategies. The results show that nations that pioneered BESS’s application in their electricity matrices have effectively promoted storage services in deregulated markets, employing storage assets for various purposes such as peak reduction, frequency regulation, renewable energy support, and energy arbitrage applications. These applications underline the potential of BESS to increase grid stability and minimize exposure to risk and volatility in the revenues of storage agents in deregulated markets.
The insertion of renewable sources to diversify the energy matrix is one of the alternatives for the energy transition. In this sense, Brazil is one of the largest producers of renewable energy in the world, mainly in wind generation. However, the impact of integrating intermittent sources into the system depends on their penetration level, causing problems in the electrical network. To evaluate this scenario, the present article aims to investigate the power quality problems generated by wind turbines in connection with the electrical system and how battery energy storage systems (BESS) solve or mitigate these disturbances in the network. Knowing the impacts of high generation power variability, the focus of the work is the application of power smoothing. However, results are presented for five applications (factor correction, voltage control, power factor smoothing, frequency control and time shift) that can be carried out at the studied wind farm. This article presents a real BESS, which has a capacity of 1 MW/1.29 MWh, connected in parallel to a group of wind turbines that provides a power of approximately 50.4 MW located in Brazil. In addition to presenting the system simulation in HOMER Pro software, this study validates the effectiveness of this BESS by presenting real operation data for each application.
This article addresses the development of the energy compensation method used for the design of hybrid energy storage systems—HBESS. The combination of two battery technologies offers better cost and performance when considering microgrid systems to provide uninterrupted power to sensitive loads (substation auxiliary system) and also provides greater energy security. In the event of a failure, the load needs to continue operating, and batteries such as lithium ions have a fast response, but are expensive for large-scale systems. However, some technologies offer low-cost and good availability of energy for long hours of discharge, such as lead–acid batteries. Consequently, different battery technologies can be used to meet all the needs of the sensitive loads. A specific method for sizing a HBESS was developed for islanded microgrids to support sensitive loads. This method was developed to meet the demand for substations outside the Brazilian standard of power systems that lack an uninterrupted and reliable energy source. The method is validated by designing a microgrid to support the auxiliary systems of a transmission substation in northeastern Brazil. The results showed a system with a capacity of 1215 kWh of lead-carbon and 242 kWh of lithium ions is necessary to maintain an islanded microgrid for at least 10 h. Furthermore, the microgrid comprises a PV plant with an AC output power of 700 kW in connected operation and 100 kW when islanded from the grid.
Increasing wind generation insertion levels on electrical grids through power converters may cause instabilities in the AC grid due to the intermittent wind nature. Integrating a Battery Electric Energy Storage System (BESS) in wind generation can smooth the power injection at the Common Coupling Point (PCC), contributing to the power system voltage and frequency stability. In this article, it is proposed to analyze the operation of a lithium-ion battery technology based 1 MW/1.29 MWh BESS connected in parallel with wind generation with a capacity of 50.4 MW. The main characteristics investigated are power smoothing and power factor correction. Experimental results show that BESS contributes to smoothing the active power and correcting the power factor of wind generation, improving the quality of electrical energy at the PCC.
Substation (SS) auxiliary systems (SAux) are facilities responsible for hosting the alternating (AC) and direct current (DC) busbar to serve the equipment and systems that perform the substation’s protection, control, and supervision. External and internal power supplies typically ensure the continuity of such a facility. The electricity support will be restricted to diesel emergency generators (DG) if the external power supply is unavailable due to a contingency. The DG present a slower response time and are susceptible to starting failures. Microgrids with Battery Energy Storage Systems (BESS) paired with photovoltaic systems (PV) are presented as an innovative and reliable solution for powering the SAux. In this article, tests were carried out on the microgrid of the Edson Mororó Moura Institute of Technology (ITEMM) in Brazil to support the use of microgrids BESS/PV in the SAux of a transmission SS of the São Francisco Hydroelectric Company (Chesf). Without an external power supply, BESS commands the action of islanded operation, maintaining both voltage and frequency requirements of the microgrid without load shedding. It was possible to observe all operations of the microgrid. The experimental results showed that the solution proposed in the paper implements a dependable self-dispatchable autonomous power supply.