The increase in waste has motivated the adoption of the circular economy concept, which assumes particular relevance in the case of plastic materials. This has led to research of new possibilities for recycling plastics after their end-of-life. To achieve this goal, it is fundamental to understand how the materials’ properties change after recycling. This study aims to evaluate the thermal and mechanical properties of recycled plastics, namely polycarbonate (PC), polystyrene (PS), glass fibre-reinforced polyamide 6 (PA6-GF30), and polyethylene terephthalate (PET). With this purpose, injected samples were mechanically recycled twice and compared through thermal and mechanical tests, such as differential scanning calorimetry, hardness, tensile strength, and the melt flow rate. The results show that the amorphous materials used do not suffer significant changes in their properties but exhibit changes in their optical characteristics. The semicrystalline ones present some modifications. PET is the material that suffers the biggest changes, both in its flowability and mechanical properties. This work demonstrates that the mechanical recycling process may be an interesting possibility for recycling depending on the desired quality of final products, allowing for some materials to maintain comparable thermal and mechanical properties after going through the recycling process.

Orthoses are commonly used for treating injuries to improve the quality of life of patients, with customized orthoses offering significant benefits. Additive manufacturing, especially fused deposition modelling, enhances these benefits by providing faster, more precise, and more comfortable orthoses. The present study evaluates nine polymeric materials printed in horizontal and vertical directions by assessing their performance through compressive, flexural, and tensile tests. Among all materials, polycarbonate, polylactic acid, and ULTEM^TM 1010 showed the most promising results, not only because they had the highest mechanical values, but also due to their minimal or no difference in performance between printing directions, making them advantageous in orthoses fabrication. Based on this, a finite element model of an ankle–foot orthosis was developed to simulate the deformation, strain, and stress fields under static conditions. The findings aim to optimize material selection for orthotic fabrication, where ULTEM^TM 1010 is presented as the material with improved performance and durability.

Orthotic devices play an important role in medical treatment, addressing various pathologies and promoting patient recovery. Customization of orthoses to fit individual patient morphologies and needs is essential for optimal functionality and patient comfort. The advent of additive manufacturing has revolutionized the biomedical field, offering advantages such as cost reduction, increased personalization, and enhanced dimensional adaptability for orthotics manufacturing. This research focuses on the impact strength of nine polymeric materials printed by additive manufacturing, including an evaluation of the materials’ performance under varying conditions comprising different printing directions (vertical and horizontal) and exposure to artificial sweat for different durations (0 days, 24 days, and 189 days). The results showed that Nylon 12 is good for short-term (24 days) immersion, with absorbed energies of 78 J and 64 J for the vertical and horizontal directions, whereas Polycarbonate (PC) is good for long-term immersion (189 days), with absorbed energies of 66 J and 78 J for the vertical and horizontal directions. Overall, the findings contribute to a better understanding of the suitability of these materials for biomedical applications, considering both short-term and long-term exposure to physiological and environmental conditions.

In this study, we describe the design and fabrication of an industrial injection moulding system that can be mounted and used on the NCD-SWEET small-angle X-ray scattering beamline at ALBA. We show how highly useful time-resolved data can be obtained using this system. We are able to evaluate the fraction of the material in the mould cavity and identify the first material to solidify and how this varies with the injection temperature. The design follows current industrial practice and provides opportunities to collect time-resolved data at several points within the mould cavity so that we can build up a 4D perspective of the morphology and its temporal development. The quantitative data obtained will prove invaluable for the optimisation of the next generation of injection moulding techniques. This preliminary work used results from the injection moulding of a general-purpose isotactic polypropylene.

Plastic waste is increasing, and a strategy to reduce it is needed to minimize the integration of virgin raw material in the production of parts

We describe the design and fabrication of an industrial injection moulding system which can be mounted and used on the NCD-SWEET Small-angle X-Ray Scattering Beamline at ALBA. We show how highly useful time-resolved data can be obtained using this system. We are able to evaluate the fraction of material in the mould cavity and identify the first material to solidify and how this varies with the injection tem-perature. The design follows current industrial practice and provides opportunities to collect time-resolved data at several points within the mould cavity so we can build up a 4D perspective of the morphology and its temporal development. The quantitative data obtained will prove invaluable for the optimisation of the next generation of in-jection moulding techniques. This preliminary work used results from the injection moulding of a general purpose isotactic polypropylene.