Andres Montero-Izquierdo

Dr. Andres Montero-Izquierdo

Universidad de Cuenca, Cuenca, Azuay, Ecuador
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2022 in Catalysts
Verified
Journal Article
Open access
PDF file
DTDiego Tacuri
Diego Tacuri
Christian Javier Andrade HerreraChristian Javier Andrade Herrera
Christian Javier Andrade Herrera
Edgar Paul ÁlvarezEdgar Paul Álvarez
Edgar Paul Álvarez
Monica Abril GonzalezMonica Abril Gonzalez
Monica Abril Gonzalez
SZSilvana Zalamea
Silvana Zalamea
Andres Montero-IzquierdoAndres Montero-Izquierdo
Andres Montero-Izquierdo
Hydrogen produced from biomass is an alternative energy source to fossil fuels. In this study, hydrogen production by gasification of the banana plant is proposed. A fixed-bed catalytic reactor was designed considering fluidization conditions and a height/diameter ratio of 3/1. Experimentation was carried out under the following conditions: 368 °C, atmospheric pressure, 11.75 g of residual mass of the banana (pseudo-stem), an average particle diameter of 1.84 mm, and superheated water vapor as a gasifying agent. Gasification reactions were performed using a catalyzed and uncatalyzed medium to compare the effectiveness of each case. The catalyst was Ni/Al2O3, synthesized by coprecipitation. The gas mixture produced from the reaction was continuously condensed to form a two-phase liquid–gas system. The synthesis gas was passed through a silica gel filter and analyzed online by gas chromatography. To conclude, the results of this study show production of 178 mg of synthesis gas for every 1 g of biomass and the selectivity of hydrogen to be 51.8 mol% when a Ni 2.5% w/w catalyst was used. The amount of CO2 was halved, and CO was reduced from 3.87% to 0% in molar percentage. Lastly, a simulation of the distribution of temperatures inside the furnace was developed; the modeled behavior is in agreement with experimental observations.

1 March 2017 in Geothermics
Verified
Journal Article
Closed access
Guillermo SorianoGuillermo Soriano
Guillermo Soriano
TETania Espinoza
Tania Espinoza
RVRuben Villanueva
Ruben Villanueva
IGInmaculada Gonzalez
Inmaculada Gonzalez
Andres Montero-IzquierdoAndres Montero-Izquierdo
Andres Montero-Izquierdo
KLKatthy Lopez
Katthy Lopez

29 September 2014 in Enfoque UTE
Verified
Journal Article
Open access
PDF file
GGGonzalo Guerrón
Gonzalo Guerrón
EGEdwin García
Edwin García
Andres Montero-IzquierdoAndres Montero-Izquierdo
Andres Montero-Izquierdo
(Recibido: 2014/04/30 - Aceptado: 2014/09/22) La matriz energética mundial está cambiando debido a que el consumo de energía en los últimos años se ha duplicado. En muchos países la instalación de centrales de energías renovables no convencionales se ha convertido en la solución a este crecimiento. La integración de este tipo de energías a la red eléctrica causa interés en el estudio de las propiedades eléctricas que afectan la producción de energía. Este documento es una revisión de los conceptos y fenómenos de calidad de energía y cómo estos se generan en parques eólicos. La eficiencia de los aerogeneradores se ve afectada por diversos factores, entre los cuales se destacan: las maniobras en subestaciones y los factores climáticos como las ráfagas de viento causantes de variaciones en la curva de potencia. El monitoreo constante en los sistemas eléctricos y el análisis de datos ofrece un alto potencial en la mejora de los procesos de producción y distribución de la energía.

31 July 2023 in Urban Science
Verified
Journal Article
Open access
PDF file
DSDoménica Seminario
Doménica Seminario
MOMelissa Ortega
Melissa Ortega
VPVeronica Pinos
Veronica Pinos
JCJuan Cisneros
Juan Cisneros
Andres Montero-IzquierdoAndres Montero-Izquierdo
Andres Montero-Izquierdo
Edgar Paul ÁlvarezEdgar Paul Álvarez
Edgar Paul Álvarez
The consumption of batteries and cooking oil have been increasing. Most used batteries are disposed of incorrectly, leading to health and environmental problems because of their composition. In a similar form, cooking oil, once used, is often released by the discharge reaching the wastewater, polluting soil, and water, which affects its treatment. In Ecuador, these environmental passives are recollected and stored without further treatment, which is a temporary and unsustainable solution. To address this issue, the circular economy concept has gained increasing attention. In this study, zinc oxide was prepared from discarded batteries using the hydrometallurgical method to use as a catalyst; it achieved 98.49% purity and 56.20% yield and 20.92% of particles presented a particle size of 1–10 nm. Furthermore, the catalyst morphology was investigated in an SEM, which showed that particle size ranged from 155.69 up to 490.15 nm and spherical shapes. Due to its characteristics, the obtained catalyst can be used in the industry instead of the zinc oxide obtained by mining processes. These processes are known to produce heavy contamination in the ecosystems and human health. Additionally, a zinc oxide lifecycle in the environment was analyzed through a material flow analysis (MFA), taking into consideration two paths, one assuming the disposal of used batteries and the other assuming the recycling of zinc. Biodiesel was produced with a heterogeneous catalyst. This took place with a transesterification reaction with used cooking oil, ethanol, and zinc oxide (ZnO) as catalysts. The biodiesel obtained had the following characteristics: 37.55 kJg−1 of heating power, 0.892 gcm−3 of density, 4.189 mm2/s of viscosity, 0.001% of water content, and a 70.91% yield. Furthermore, the energy consumption in biodiesel production was quantified, giving a total of 37.15 kWh. This kind of initiative prevents that waste from becoming environmental pollutants and potential health risks by giving them a second use as a resource. Moreover, turning waste into a valuable product makes the processes self-sustaining and attractive to be implemented.

1 August 2015 in Revista ingeniería de construcción
Verified
Journal Article
Open access
PDF file
IMIsabel Miño
Isabel Miño
CNCarlos Naranjo Naranjo-Mendoza
Carlos Naranjo Naranjo-Mendoza
Andres Montero-IzquierdoAndres Montero-Izquierdo
Andres Montero-Izquierdo
In Antarctica, as a sensitive continent to human activities and a strategic site for research on the effects of climate change, it is important that the developed projects minimize environmental impacts. Within this context, the Ecuadorian Antarctic seasonal Station Pedro Vicente Maldonado, built in 1990, will become, in a few years a permanent station. For this reason, to optimize energy consumption, various energy efficiency measures were analyzed on a calibrated energy model based on the current base diesel consumption for heating. The results of this study show that the envelope elements, for which more energy is lost, are both floor and roof. Furthermore, due to the low window to wall ratio of the station, the reduction in diesel consumption generated by the use of triple and quadruple glazing is not significant. By combining different energy efficiency measures, up to 50% of savings on annual diesel consumption for heating can be achieved compared to the diesel consumption that the current station would present operating permanently. This study will serve as a reference for the changes to be implemented at the station.

21 September 2015 in Enfoque UTE
Verified
Journal Article
Open access
PDF file
MMMarcelo Javier Moya
Marcelo Javier Moya
GGGonzalo Guerrón
Gonzalo Guerrón
Andres Montero-IzquierdoAndres Montero-Izquierdo
Andres Montero-Izquierdo
The aim of this work is to design and code an embedded system for a portable automatic weather station. The portable station includes high performance sensors to measure parameters such as: i) wind speed and direction, micro perturbations and wind gusts, ii) air temperature, iii) solar radiation, iv) relative humidity, and v) atmospheric pressure. The main contribution of this work is the development of an embedded control system operating in real time. This system is based on a Field Programmable Gate Array (FPGA) device. The method developed guarantees high-resolution data acquisition of a number of samples in real time. The samples obtained are grouped and stored in a database, which will be used as a starting point for further analysis. El objetivo de este trabajo es diseñar y programar un sistema embebido para una estación meteorológica automática portátil. La estación portátil incluye sensores de alto rendimiento para medir parámetros tales como: i) la velocidad y dirección del viento, micro perturbaciones y ráfagas de viento, ii) la temperatura del aire, iii) la radiación solar, iv) la humedad relativa, y v) la presión atmosférica. La principal contribución de este trabajo es el desarrollo de un sistema de control embebido que opera en tiempo real. Este sistema se basa en un sistema de compuertas lógicas programables en campo (FPGA). El método propuesto garantiza la adquisición de datos a alta resolución de un número de muestras en tiempo real. Las muestras obtenidas se agrupan y se almacenan en una base de datos, que será utilizado como punto de partida para su posterior análisis.