Industrial development has made new products available to people to make their lives easier. Items such as food, cleaning, personal care and health products, among others, are processed, sold and consumed daily by all age groups. These products include in their formulation inorganic and organic chemicals with the purpose of improving or increasing some of their properties, making them more attractive to the consumer. These substances are strictly controlled during production so that the final product may be safely consumed. In most cases, the constituents of commercial products end up in wastewater, where they are not controlled. These uncontrolled pollutants of differing chemical natures are known as “Emerging Contaminants” (ECs). Research worldwide has found ECs in various environmental matrices, especially water. To understand this problem, four fundamental aspects must be addressed: 1) the analytical methods for its determination; 2) the occurrence in environmental matrices; 3) the treatments for the removal of ECs in wastewater and drinking water plants; and 4) the risks to health and the environment. This document reviews these four aspects with regard to 14 ECs commonly found in the studies around the world and addresses the state of these ECs in trans-American waters.

Among emerging pollutants, endocrine disruptors such as estradiol are of most concern. Conventional water treatment technologies are not capable of removing this compound from water. This study aims to assess a method that combines physicochemical and biological strategies to eliminate estradiol even when there are other compounds present in the water matrix. Na-montmorillonite, Ca-montmorillonite and zeolite were used to remove estradiol in a medium with sulfamethoxazole, triclosan, and nicotine using a Plackett–Burman experimental design; each treatment was followed by biological filtration with Daphnia magna. Results showed between 40 to 92% estradiol adsorption in clays; no other compounds present in the mixture were adsorbed. The most significant factors for estradiol adsorption were the presence of nicotine and triclosan which favored the adsorption, the use of Ca-montmorillonite, Zeolite, and time did not favor the adsorption of estradiol. After the physicochemical treatment, Daphnia magna was able to remove between 0–93% of the remaining estradiol. The combination of adsorption and biological filtration in optimal conditions allowed the removal of 98% of the initial estradiol concentration.

UASB reactors are a promising option for environmentally friendly wastewater treatment due to their reduced carbon footprint and their capacity to treat a variety of wastewater strengths, among other recognized advantages over alternative wastewater treatment systems. The Influent Distribution System (IDS) is a critical structure for generating granules in a UASB reactor since it provides the required flow hydrodynamics for their formation. Thus, the objective of this study was to evaluate and compare the efficiency of five IDS configurations to generate ideal granulation conditions using Computational Fluid Dynamics (CFD) simulations. The IDS configurations were as follows: (C1) single radial inflow, (C2) upward axial inflow, (C3) downward distributed axial inflow, and two novel configurations in the form of (C4) double opposite radial inflow and (C5) downward tangential inflow. The hydrodynamic response of configuration C1 was validated in a physical model with dynamic Froude similitude. The granulation measurement was velocity-based in the reactor reaction zone using steady-state CFD simulations. The novel IDS configuration C4 was the one that resulted in the highest granulation volume, with up to 45.5% of the potential granulation volume of the UASB reactor, in contrast to the IDS C2 that obtained the lowest granulation with only 10.8%. Results confirm that the IDS directly impacts the hydrodynamics of the reactor and that model-based design can be used to ascertain IDS configurations that better promote granulation in UASB reactors.

Residence time distribution (RTD) curves play an essential role in the hydraulic characterization of reactors. Current approaches for obtaining RTD curves in laboratory-scale reactors are time-consuming and subject to large errors. Thus, automated systems to obtain RTD curves in laboratory-scale reactors are of great interest for reducing experimental errors due to human interaction, minimizing experimentation costs, and continuously obtaining experimental data. An automated system for obtaining RTD curves in laboratory-scale reactors was designed, built, and tested in this work. During the tests conducted in a cylindrical upflow anaerobic sludge blanket (UASB) reactor, the system worked properly using the stimulus–response pulse technique with sodium chloride as a tracer. Four main factors were found to affect the representativeness of the RTD curves: flow stabilization time, test water conductivity, temperature, and surface tension. A discussion on these factors and the corresponding solutions is presented. The RTD curves of the UASB reactor are left-skewed with a typical tank reactor’s flow shape with channeling and dead zones. A transitory flow behavior was evidenced in the reactor, which indicates the influence of internal turbulent flow structures. The system proposed herein is expected to help study the hydraulics of reactors using laboratory-scale models more efficiently.

The consumption of batteries and cooking oil have been increasing. Most used batteries are disposed of incorrectly, leading to health and environmental problems because of their composition. In a similar form, cooking oil, once used, is often released by the discharge reaching the wastewater, polluting soil, and water, which affects its treatment. In Ecuador, these environmental passives are recollected and stored without further treatment, which is a temporary and unsustainable solution. To address this issue, the circular economy concept has gained increasing attention. In this study, zinc oxide was prepared from discarded batteries using the hydrometallurgical method to use as a catalyst; it achieved 98.49% purity and 56.20% yield and 20.92% of particles presented a particle size of 1–10 nm. Furthermore, the catalyst morphology was investigated in an SEM, which showed that particle size ranged from 155.69 up to 490.15 nm and spherical shapes. Due to its characteristics, the obtained catalyst can be used in the industry instead of the zinc oxide obtained by mining processes. These processes are known to produce heavy contamination in the ecosystems and human health. Additionally, a zinc oxide lifecycle in the environment was analyzed through a material flow analysis (MFA), taking into consideration two paths, one assuming the disposal of used batteries and the other assuming the recycling of zinc. Biodiesel was produced with a heterogeneous catalyst. This took place with a transesterification reaction with used cooking oil, ethanol, and zinc oxide (ZnO) as catalysts. The biodiesel obtained had the following characteristics: 37.55 ${\mathrm{kJg}}^{-1}$ of heating power, 0.892 ${\mathrm{gcm}}^{-3}$ of density, 4.189 mm²/s of viscosity, 0.001% of water content, and a 70.91% yield. Furthermore, the energy consumption in biodiesel production was quantified, giving a total of 37.15 kWh. This kind of initiative prevents that waste from becoming environmental pollutants and potential health risks by giving them a second use as a resource. Moreover, turning waste into a valuable product makes the processes self-sustaining and attractive to be implemented.

Ecuador is a tropical country with wet and dry periods. The seasonality of water resources leads to water availability and quality variability. This study investigated the variability of physical-chemical characteristics (pH, colour, turbidity, and conductivity), aluminum content, residual free chlorine, and caffeine levels in the inlets and outlets, and in the distribution networks of the three main drinking water treatment plants in the city of Cuenca: El Cebollar (Tomebamba River), Sustag (Yanuncay River), and Tixan (Machangara River). Samples were collected from May 2023 to December 2024. The average values for each parameter fell below regulatory limits. No caffeine was detected. There were isolated instances of values exceeding the regulatory standard for aluminum in inlet and distribution samples. A deficiency of free chlorine was also observed at some points in the distribution system, which might be due to the distance from the treatment plant and the state of the pipes. These findings indicate the quality of Cuenca's drinking water. However, more water quality controls should be implemented throughout the distribution network.