Antonella Sarcinella

Dr. Antonella Sarcinella

Department of Engineering for Innovation, University of Salento, Lecce, Puglia, Italy
orcid
Research Assistant at University of Salento, Lecce, Italy

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 April 2019 in Materials
Verified
Journal Article
Open access
PDF file
Mariaenrica FrigioneMariaenrica Frigione
Mariaenrica Frigione
Mariateresa LettieriMariateresa Lettieri
Mariateresa Lettieri
Antonella SarcinellaAntonella Sarcinella
Antonella Sarcinella
The construction industry is responsible for consuming large amounts of energy. The development of new materials with the purpose of increasing the thermal efficiency of buildings is, therefore, becoming, imperative. Thus, during the last decades, integration of Phase Change Materials (PCMs) into buildings has gained interest. Such materials can reduce the temperature variations, leading to an improvement in human comfort and decreasing at the same time the energy consumption of buildings, due to their capability to absorb and release energy from/in the environment. In the present paper, recent experimental studies dealing with mortars or concrete-containing PCMs, used as passive building systems, have been examined. This review is mainly aimed at providing information on the currently investigated materials and the employed methodologies for their manufacture, as well as at summarizing the results achieved so far on this subject.

28 April 2020 in Materials
Verified
Journal Article
Open access
PDF file
Antonella SarcinellaAntonella Sarcinella
Antonella Sarcinella
Jose AguiarJose Aguiar
Jose Aguiar
Mariateresa LettieriMariateresa Lettieri
Mariateresa Lettieri
Sandra CunhaSandra Cunha
Sandra Cunha
Mariaenrica FrigioneMariaenrica Frigione
Mariaenrica Frigione
Increasing concerns about climate change and global warming bring about technical steps for the development of several energy-efficient technologies. Since the building sector is one of the largest energy users for cooling and heating necessities, the incorporation of a proper energy-efficient material into the building envelopes could be an interesting solution for saving energy. Phase change material (PCM)-based thermal energy storage (TES) seems suitable to provide efficient energy redistribution. This is possible because the PCM is able to store and release its latent heat during the phase change processes that occurs according to the environmental temperature. The purpose of this paper was the characterization of the thermal properties of a composite PCM (i.e., Lecce stone/poly-ethylene glycol, previously developed) incorporated into mortar compositions based on different binders (i.e., hydraulic lime and cement). The study was carried out using an experimental set up through which it was possible to simulate the different seasons of the years. It was observed that the addition of PCM in mortars leads to a decrease of the maximum temperatures and increase of the minimum temperatures. Furthermore, the results shown a reduction of the heating and cooling needs, thus confirming the capability of this material to save energy.

19 June 2023 in Energies
Verified
Journal Article
Open access
PDF file
Sandra CunhaSandra Cunha
Sandra Cunha
Antonella SarcinellaAntonella Sarcinella
Antonella Sarcinella
Jose AguiarJose Aguiar
Jose Aguiar
Mariaenrica FrigioneMariaenrica Frigione
Mariaenrica Frigione
The construction industry is responsible for high energetic consumption, especially associated with buildings’ heating and cooling needs. This issue has attracted the attention of the scientific community, governments and authorities from all over the world, especially in the European Union, motivated by recent international conflicts which forced the countries to rethink their energy policies. Over the years, energy consumption has been based on non-renewable energy sources such as natural gas, oil and coal. Nowadays, it is urgent to implement solutions that aim to minimize these high energetic consumptions and act based on clean and renewable energy sources. In recent years, phase change materials (PCM) have become an area of high interest and development, since they allow to minimize the energy consumption in buildings, based in solar energy, due to their thermal storage capacity. The main objective of this work consists of a perspective of the evolution of the development and application of thermal storage technology through the incorporation of PCM in the construction sector, focusing on the last 10 years of research, showing the most recent developments of its application in construction materials, such as mortars, concrete, incorporation in porous aggregates, naturally based materials, carbon-based materials, boards, blocks and solar thermal systems.

14 May 2025 in Polymers
Verified
Journal Article
Open access
PDF file
Antonella SarcinellaAntonella Sarcinella
Antonella Sarcinella
Sandra CunhaSandra Cunha
Sandra Cunha
IAIngried Aguiar
Ingried Aguiar
Jose AguiarJose Aguiar
Jose Aguiar
Mariaenrica FrigioneMariaenrica Frigione
Mariaenrica Frigione
The growing demand for sustainable energy solutions has intensified research on phase change materials (PCMs) due to their ability to efficiently store and release thermal energy. However, traditional PCMs are often made from petroleum-derived materials or rely on processes that pose environmental concerns. The aim of this work is therefore to explore the development and use of sustainable organic PCMs, in particular those based on bio-based or waste-derived materials. Bio-based PCMs, including fatty acids, natural waxes, and biopolymers, are in fact characterized by renewability and biodegradability. Waste-derived PCMs, such as those from the lost-wax casting industry and industrial by-products, offer an environmentally friendly approach to energy storage by reusing waste materials. This paper aims to analyze the thermal, mechanical, and in-service performance of these sustainable materials, highlighting their advantages and limitations compared to the most widely used commercial PCMs. Furthermore, recent progress in the integration of sustainable PCMs into building materials is illustrated to assess their practical implementation. Challenges and limitations, as well as possible solutions and future research directions, are also discussed.

4 February 2022 in Materials
Verified
Journal Article
Open access
PDF file
Antonella SarcinellaAntonella Sarcinella
Antonella Sarcinella
Jose AguiarJose Aguiar
Jose Aguiar
Mariaenrica FrigioneMariaenrica Frigione
Mariaenrica Frigione
The aim of this experimental investigation was to produce a form-stable phase change material (PCM) able to reduce the need for nonrenewable energy resources required for the heating/cooling of buildings located in regions characterized by different climatic conditions. The innovative PCM must also be sustainable and must be produced according to the principles of the circular economy. To achieve such ambitious goals, a form-stable, sustainable PCM was produced through vacuum impregnation. The form-stable PCM was produced starting from a low-toxicity, low-flammability polyethylene glycol of medium molecular weight (PEG 800), which was included in porous stone granules obtained as waste products of the cutting/processing of local (Lecce) stone. The thermal properties and thermal stability of PEG 800 and of its PCM-composite were evaluated by employing differential scanning calorimetry (DSC) and thermo-gravimetric analysis (TGA). The appropriate parameters to perform the impregnation procedure were identified through rheological and calorimetric analyses. A simple leakage test was performed to assess if the PEG polymer can leak from the stone flakes. Finally, the new PCM was added as an aggregate in aerial-lime-based mortars, and the mortar’s properties were analyzed in fresh (workability) and hardened (flexural and compressive strength and thermal characteristics) states for potential applications, particularly in ancient buildings.

25 October 2019 in Materials
Verified
Journal Article
Open access
PDF file
Mariaenrica FrigioneMariaenrica Frigione
Mariaenrica Frigione
Mariateresa LettieriMariateresa Lettieri
Mariateresa Lettieri
Antonella SarcinellaAntonella Sarcinella
Antonella Sarcinella
Jose AguiarJose Aguiar
Jose Aguiar
Eco-sustainable, low toxic and low flammable poly-ethylene glycol (PEG) was forced into flakes of the porous Lecce stone (LS), collected as stone cutting wastes, employing a very simple cheap method, to produce a “form-stable” phase change material (PCM). The experimental PCM was included in mortars based on different binders (hydraulic lime, gypsum and cement) in two compositions. The main thermal and mechanical characteristics of the produced mortars were evaluated in order to assess the effects due to the incorporation of the PEG-based PCM. The mortars containing the PEG-based PCM were found to be suitable as thermal energy storage systems, still displaying the characteristics melting and crystallization peaks of PEG polymer, even if the related enthalpies measured on the mortars were appreciably reduced respect to pure PEG. The general reduction in mechanical properties (in flexural and compressive mode) measured on all the mortars, brought about by the presence of PEG-based PCM, was overcome by producing mortars possessing a greater amount of binder. The proposed LS/PEG composite can be considered, therefore, as a promising PCM system for the different mortars analyzed, provided that an optimal composition is identified for each binder.