Anxhelina Myftarago

Dr. Anxhelina Myftarago

Institute of Functional Interfaces, Karlsruhe Institute of Technology, Karlsruhe, Baden-Württemberg, Germany
+2
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 November 2022 in CivilEng
Verified
Journal Article
Open access
PDF file
Anxhelina MyftaragoAnxhelina Myftarago
Anxhelina Myftarago
TBThomas A. Bier
Thomas A. Bier
In this study, the significance of several factors in the performance of self-compacting mortar was statistically investigated. A screening design was used as a suitable design to identify the most important factors that can affect workability and compressive strength. The purpose of the study was to obtain the optimal conditions which can lead to optimal workability (slump flow, funnel time) and maximal compressive strength (2 and 28 days). Four experimental factors each at two levels, the type of supplementary cementitious material (SCM) as silica fume (SF) and metakaolin (MK); the amount of (SCM) at 5% and 15%; superplasticizer (SP) at 0.3% and 1.2% and viscosity modifying agent (VMA) at 0.05% and 0.2% were selected as potential candidates affecting the experimental outputs. The analysis of the data to obtain optimal values of the outputs was carried out by using MINITAB®. To establish the factor levels selected in this study in order to achieve optimal workability and maximal compressive strength, response optimization was applied. The predicted conditions for optimal workability were found to be 8.84% SF, 1.2% SP and 0.15% VMA. The solution proposed to maximize the compressive strength was 0.3% SP, 0.05% VMA and 9% or 9.75% SF for 2 and 28 days, respectively. By setting the factors at the specified levels, experimental values of the slump flow at 278 mm; funnel time at 8.3 s; 2- and 28-day compressive strength at 22.8 and 66.1 MPa were achieved. This resulted in the predicted and experimental values at the optimum conditions being in strong agreement.

30 September 2023 in Buildings
Verified
Journal Article
Open access
PDF file
Anxhelina MyftaragoAnxhelina Myftarago
Anxhelina Myftarago
TBThomas A. Bier
Thomas A. Bier
EQElsa Qoku
Elsa Qoku
RARamadan Aliti
Ramadan Aliti
MZMilazim Zogaj
Milazim Zogaj
This study investigates the influence of various factors on the performance of ternary binders, utilizing statistical approaches. The research focuses on the influence of varying compositions of Portland Cement-Calcium Aluminate Cement-Calcium Sulphate (PC-CAC-CŜ), types and amounts of mineral powders, and chemical admixtures in ternary binders. Using the Taguchi design, the study required a limited number of experimental trials, utilizing a standard orthogonal array of seven factors across three levels. These factors encompassed binder composition (C1-C2-C3), mineral powder types (limestone, quartz, slag), replacement ratio (0%, 25%, 50%), retarder (0%, 0.1%, 0.2%), superplasticizer, viscosity modifying agent (stabilizer) and accelerator (0%, 0.05%, 0.1%). Measurements on hydration kinetics, dimensional stability, compressive strength, and microstructural analyses like X-ray diffraction were conducted. Principal Component Analysis (PCA) was employed to interpret the continuous data derived from heat of hydration curves, length change curves and X-ray diffraction (XRD) patterns. Results indicated that retarder quantity and binder type significantly impacted paste workability. Higher powder content led to reduced strength, whereas increased accelerator improved strength. A strong correlation was observed between accelerator content and the dimensional stability. The primary hydration product’s formation was predominantly influenced by the PC-CAC-CŜ ratio, accelerator, and cement substitutions.

29 October 2017
Verified
Conference Paper
Open access
PDF file
Anxhelina MyftaragoAnxhelina Myftarago
Anxhelina Myftarago
EQElsa Qoku
Elsa Qoku
TBThomas A. Bier
Thomas A. Bier
TDTeuta Dilo
Teuta Dilo
Ternary binders are defined in this study as compositions of Calcium Aluminate Cement (CAC), Ordinary Portland Cement (OPC) and Calcium Sulfate (𝐶𝑆 ̅). Several mixtures were studied, calorimetric and shrinkage technique has been used to follow the hydration during 24 hours. The XRD technique is used as support for the analysis of the hydration products. The results have shown that the initial amount of 𝐶𝐴𝐶 and 𝐶𝑆 ̅ play a key role in the hydration of 𝑃𝐶/𝐶𝐴𝐶/𝐶𝑆 ̅ mixtures especially affecting the formation of ettringite. The mechanism of reactions (hydration kinetic) and the reactions speed (acceleration or retardation) depends by the aggregates (LSP, QP) put in the different binders. The addition of re-dispersible powders induced retardation in hydration kinetics, longer setting times and also changed the dimensional stability. Comparison of the phase development monitored by in-situ XRD was performed.