Laboratory of Nanomaterials and Systems for Renewable Energies (LaNSER), Research and Technology Center of Energy, Techno-Park Borj Cedria, Hammam-Lif, Tunisia
+1
Doctor in physics
Dr. Souha Aouini
Laboratory of Nanomaterials and Systems for Renewable Energies (LaNSER), Research and Technology Center of Energy, Techno-Park Borj Cedria, Hammam-Lif, Tunisia
ZnMn2O4 spinels are prepared by a simple hydrothermal route with control of the reaction time, ranging from 6 h to 18 h. The evolution of the structural and morphological parameters under the effect of time was analyzed by XRD, ATR-FTIR, XPS, and SEM-EDS. The XRD results show that for longer reaction times (18 h), the ZnMn2O4 spinel samples present a tetragonal structure with high crystallinity and an average crystallite size of 32.3 ± 1.7 nm, larger than those obtained for 6 h and 12 h. The ATR-FTIR spectra confirm the structural results, with well-defined peaks related to stretching vibrations of M-O (M = Zn, Mn) functional groups. XPS reveals the co-existence of several metal oxides and hydroxides at the outermost surface. SEM analysis shows that the samples present a pyramid morphology, better defined at 18 h, with an average particle size of 6.2 ± 1.5 µm. EDS analysis of ZnMn2O4 (18 h) reveals atomic ratios of 0.45, 0.22, and 0.50 for Zn/Mn, Zn/O, and Mn/O, respectively, in good agreement with the expected values. Based on the CVs, the synthesized ZnMn2O4 samples formed at 18 h showed the most promising electrochemical properties, with a specific capacity of 102 F g−1, offering great potential in supercapacitor applications.
1
22 April 2022 in Journal of Materials Science: Materials in Electronics
CuMn 2 O 4 (CMO) thin films are produced using a simple hydrothermal method. The influence of reaction duration on the electrodes’ electrochemical performance is investigated. XRD data shows improved crystal structure after 24-h reaction time, with a crystallite size of 12.17 nm. Distinct vibrational peaks associated with Cu–O and Mn–O are observed in the ATR-FTIR spectra, corroborating the spinel formation after 24 h. XPS analysis shows a compositional shift over time, starting with copper hydroxide at 12 h, evolving into a mix of copper and manganese oxides, hydroxides, and oxyhydroxides by 18 h, and achieving the desired spinel composition by 24 h. Microscopic analysis reveals CMO is arranged as small sheet structures, with 4.95 ± 2.92 µm in length after 24-h reaction. The CMO 24h electrode displays a maximum specific capacitance of 1187.50 Fg−1 at a scan rate of 1 mVs−1 in 1 M Na 2 SO 4 electrolyte. The electrochemical performance of the synthesized CMO electrodes reveals a high potential for energy storage applications.
MnCo2O4 and CoMn2O4 were successfully synthesized on a stainless-steel substrate using the hydrothermal method. The structural and morphological characteristics of the spinel samples were investigated using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The electronic and vibrational properties were studied through X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Electrochemical properties were also evaluated using a three-electrode system associated with an electrochemical workstation. The studies revealed that the inversion of Mn and Co cation distribution between the spinel structure sites not only modifies the crystal structure and morphology but also alters specific functional properties. MnCo2O4 crystallized in a cubic spinel phase, exhibiting spherical particles, pronounced microstrain, and stronger metal–oxygen bonding. In contrast, CoMn2O4 adopted a tetragonal spinel structure with rod-like crystallites, lower microstrain, and more flexible bonding environments. Electrochemical impedance spectroscopy further revealed distinct charge-transfer dynamics, indicating differences in surface redox activity. This comparative analysis elucidates how cation site occupancy governs the performance of the synthesized spinel oxides and underscores their potential as efficient catalysts or catalyst supports for redox and energy-related applications.