Apostolos Argyros

Mr. Apostolos Argyros

1. Physical Metallurgy Laboratory, Dept. of Mechanical Engineering, School of Engineering, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece 2. Centre for Research & Development of Advanced Materials (CERDAM), Center for Interdisciplinary Research and Innovation, Balkan Centre, Building B’, 10th km Thessaloniki-Thermi Road, 57001, Thessaloniki, Greece
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 August 2022 in Journal of the Mechanical Behavior of Biomedical Materials
Verified
Journal Article
Open access
NVNectarios Vidakis
Nectarios Vidakis
Markos PetousisMarkos Petousis
Markos Petousis
Nikolaos MichailidisNikolaos Michailidis
Nikolaos Michailidis
John (Ioannis) KechagiasJohn (Ioannis) Kechagias
John (Ioannis) Kechagias
NMNikolaos Mountakis
Nikolaos Mountakis
Sotirios GrammatikosSotirios Grammatikos
Sotirios Grammatikos
The effect of Cellulose NanoFiber (CNF) addition to a medical-grade resin in Stereolithography (SLA) Additive Manufacturing (AM) technology is reported, aiming to elaborate an easily processable, highly stiff bio-compound. CNFs were shear stir blended at various weight ratios with liquid resin. The fabricated nanocomposite materials were introduced in an SLA 3D printer for specimens manufacturing. The mechanical performance was studied according to international standards. Charpy Toughness and Vickers microhardness were calculated for all tested materials. A microscopic and surface analysis was conducted on fractured tensile specimens by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM), respectively. The thermal and thermomechanical properties were investigated by Thermogravimetric Analysis (TGA), Differential Calorimetry (DSC), and Dynamic Mechanical Analysis (DMA). Significant reinforcement of the medical-grade nanocomposites is reported, with the highest values calculated to be at 1.0 wt% concentration (more than 100% at the tensile strength), while brittleness and rigidity were increased.

10 June 2024 in Biomass and Bioenergy
Verified
Journal Article
Closed access
Markos PetousisMarkos Petousis
Markos Petousis
Emmanuel MaravelakisEmmanuel Maravelakis
Emmanuel Maravelakis
Dimitrios KalderisDimitrios Kalderis
Dimitrios Kalderis
VSVassilios Saltas
Vassilios Saltas
NMNikolaos Mountakis
Nikolaos Mountakis
NVNectarios Vidakis
Nectarios Vidakis

9 May 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Markos PetousisMarkos Petousis
Markos Petousis
Nikolaos MichailidisNikolaos Michailidis
Nikolaos Michailidis
Vassilis M PapadakisVassilis M Papadakis
Vassilis M Papadakis
Apostolos KorlosApostolos Korlos
Apostolos Korlos
NMNikolaos Mountakis
Nikolaos Mountakis
NVNectarios Vidakis
Nectarios Vidakis
The current research aimed to examine the thermomechanical properties of new nanocomposites in additive manufacturing (AM). Material extrusion (MEX) 3D printing was utilized to evolve acrylonitrile butadiene styrene (ABS) nanocomposites with silicon nitride nano-inclusions. Regarding the mechanical and thermal response, the fabricated 3D-printed samples were subjected to a course of standard tests, in view to evaluate the influence of the Si3N4 nanofiller content in the polymer matrix. The morphology and fractography of the fabricated filaments and samples were examined using scanning electron microscopy and atomic force microscopy. Moreover, Raman and energy dispersive spectroscopy tests were accomplished to evaluate the composition of the matrix polymer and nanomaterials. Silicon nitride nanoparticles were proved to induce a significant mechanical reinforcement in comparison with the polymer matrix without any additives or fillers. The optimal mechanical response was depicted to the grade ABS/Si3N4 4 wt. %. An impressive increase in flexural strength (30.3%) and flexural toughness (47.2%) was found. The results validate that these novel ABS nanocomposites with improved mechanical properties can be promising materials.

12 August 2023 in Ceramics International
Verified
Journal Article
Closed access
NVNectarios Vidakis
Nectarios Vidakis
AMAmalia Moutsopoulou
Amalia Moutsopoulou
Markos PetousisMarkos Petousis
Markos Petousis
Nikolaos MichailidisNikolaos Michailidis
Nikolaos Michailidis
CCChrysa Charou
Chrysa Charou
AAApostolos Argyros
Apostolos Argyros

6 May 2022 in Polymers
Verified
Journal Article
Open access
PDF file
NVNectarios Vidakis
Nectarios Vidakis
Markos PetousisMarkos Petousis
Markos Petousis
Nikolaos MichailidisNikolaos Michailidis
Nikolaos Michailidis
Vassilis M PapadakisVassilis M Papadakis
Vassilis M Papadakis
Apostolos KorlosApostolos Korlos
Apostolos Korlos
AAApostolos Argyros
Apostolos Argyros
This study introduced binary nanoparticle (NP) inclusions into a biomedical-grade photosensitive resin (Biomed Clear-BC). Multi-functional, three-dimensional (3D) printed objects were manufactured via the vat photopolymerization additive manufacturing (AM) technique. Cellulose nanofibers (CNFs) as one dimensional (1D) nanomaterial have been utilized for the mechanical reinforcement of the resin, while three different spherical NPs, namely copper NPs (nCu), copper oxide NPs (nCuO), and a commercial antimicrobial powder (nAP), endowed the antimicrobial character. The nanoparticle loading was kept constant at 1.0 wt.% to elucidate any synergistic effects as a function of the filler loading. Raman, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) revealed the chemical/spectroscopic and thermal properties of the different manufactured samples. Scanning electron microscopy and Atomic Force Microscopy (AFM) revealed the morphology of the samples. Mechanical properties revealed the reinforcement mechanisms, namely that BC/CNF (1.0 wt.%) exhibited a 102% and 154% enhancement in strength and modulus, respectively, while BC/CNF(1.0 wt.%)/AP(1.0 wt.%) exhibited a 95% and 101% enhancement, as well as an antibacterial property, which was studied using a screening agar well diffusion method. This study opens the route towards novel, multi-functional materials for vat photopolymerization 3D printing biomedical applications, where mechanical reinforcement and antibacterial performance are typically required in the operational environment.

1 August 2024 in Defence Technology
Verified
Journal Article
Open access
NVNectarios Vidakis
Nectarios Vidakis
NMNikolaos Michailidis
Nikolaos Michailidis
Markos PetousisMarkos Petousis
Markos Petousis
NNNektarios K. Nasikas
Nektarios K. Nasikas
VSVassilios Saltas
Vassilios Saltas
IVIoannis Valsamos
Ioannis Valsamos