Toward an Artificial Muscle: In designing materials for artificial muscles, the goals are to find those that will combine high strokes, high efficiency, long cycle life, low hysteresis, and low cost. Now,
Haines
et al. (p. 868 ; see the Perspective by Yuan and Poulin ) show that this is possible. Twisting high-strength, readily available polymer fibers, such as those used for fishing lines or sewing thread, to the point where they coil up, allowed construction of highly efficient actuators that could be triggered by a number of stimuli.
Flexible, wearable, implantable and easily reconfigurable supercapacitors delivering high energy and power densities are needed for electronic devices. Here we demonstrate weavable, sewable, knottable and braidable yarns that function as high performance electrodes of redox supercapacitors. A novel technology, gradient biscrolling, provides fast-ion-transport yarn in which hundreds of layers of conducting-polymer-infiltrated carbon nanotube sheet are scrolled into ~20 μm diameter yarn. Plying the biscrolled yarn with a metal wire current collector increases power generation capabilities. The volumetric capacitance is high (up to ~179 F cm−3) and the discharge current of the plied yarn supercapacitor linearly increases with voltage scan rate up to ~80 V s−1 and ~20 V s−1 for liquid and solid electrolytes, respectively. The exceptionally high energy and power densities for the complete supercapacitor, and high cycle life that little depends on winding or sewing (92%, 99% after 10,000 cycles, respectively) are important for the applications in electronic textiles.
Composite stretchable conducting wires: Think how useful a stretchable electronic “skin” could be. For example you could place it over an aircraft fuselage or a body to create a network of sensors, processors, energy stores, or artificial muscles. But it is difficult to make electronic interconnects and strain sensors that can stretch over such surfaces. Liu et al. created superelastic conducting fibers by depositing carbon nanotube sheets onto a prestretched rubber core (see the Perspective by Ghosh). The nanotubes buckled on relaxation of the core, but continued to coat it fully and could stretch enormously, with relatively little change in resistance. Science , this issue p. 400 ; see also p. 382
It is a challenge to fabricate graphene bulk materials with properties arising from the nature of individual graphene sheets, and which assemble into monolithic three-dimensional structures. Here we report the scalable self-assembly of randomly oriented graphene sheets into additive-free, essentially homogenous graphene sponge materials that provide a combination of both cork-like and rubber-like properties. These graphene sponges, with densities similar to air, display Poisson’s ratios in all directions that are near-zero and largely strain-independent during reversible compression to giant strains. And at the same time, they function as enthalpic rubbers, which can recover up to 98% compression in air and 90% in liquids, and operate between −196 and 900 °C. Furthermore, these sponges provide reversible liquid absorption for hundreds of cycles and then discharge it within seconds, while still providing an effective near-zero Poisson’s ratio.
5 March 2014 in Angewandte Chemie International Edition
Making the most of twists and turns: The rise of small-scale, portable electronics and wearable devices has boosted the desire for ways to harvest energy from mechanical motion. Such approaches could be used to provide battery-free power with a small footprint. Kim et al. present an energy harvester made from carbon nanotube yarn that converts mechanical energy into electrical energy from both torsional and tensile motion. Their findings reveal how the extent of yarn twisting and the combination of homochiral and heterochiral coiled yarns can maximize energy generation. Science , this issue p. 773