1 November 2018 in Engineering Geology
1 November 2018 in Soil Dynamics and Earthquake Engineering
1 January 2019 in Soil Dynamics and Earthquake Engineering
1 May 2022 in International Journal of Geomechanics
Rockfill strength parameters are important indicators of the stability of a rockfill dam slope. Therefore, a rational representation of the distribution characteristics of these parameters is extremely important to accurately assess the stability of the dynamic response and reliability of the three-dimensional (3D) slope of a rockfill dam. A joint distribution model of the rockfill strength parameters is constructed in this study using the copula function. In addition, a dynamic reliability analysis method for slope stability is proposed using a number-theoretical method and the generalized probability density evolution method (GPDEM). First, the method is validated by comparing the results for a numerical example with those obtained by Monte Carlo simulation (MCS). Second, the traditional and proposed joint distribution models are comparatively analyzed in terms of the dynamic response and reliability. Finally, the effect of the type of copula function on the dynamic reliability of the slope is investigated. The results show that the copula theory, the number-theoretical method, and the GPDEM provide an effective approach to analyze the dynamic response and reliability of slope stability. The randomness of rockfill strength parameters is sensitive to the safety factor of the slope stability of rockfill dams. The reliability analysis method can reasonably characterize the influence of strength parameter uncertainty on dam slope stability, which makes up for the deficiency of using a single safety measurement standard in the deterministic analysis method. The copula function can reasonably characterize the nonnormal distribution characteristics of rockfill strength parameters, improve the calculation accuracy of the slope stability reliability of rockfill dams, and provide an important scientific basis for the accurate safety assessment of dam slope stability. The type of copula function has an important impact on the dynamic reliability results for slope stability. Thus, it is extremely important to build a joint distribution model of rockfill strength parameters based on a rational selection of the optimal copula function.
1 December 2018 in Applied Ocean Research
1 January 2014 in The Scientific World Journal
After the Wenchuan earthquake in 2008, the Zipingpu concrete faced rockfill dam (CFRD) was found slabs dislocation between different stages slabs and the maximum value reached 17 cm. This is a new damage pattern and did not occur in previous seismic damage investigation. Slabs dislocation will affect the seepage control system of the CFRD gravely and even the safety of the dam. Therefore, investigations of the slabs dislocation’s mechanism and development might be meaningful to the engineering design of the CFRD. In this study, based on the previous studies by the authors, the slabs dislocation phenomenon of the Zipingpu CFRD was investigated. The procedure and constitutive model of materials used for finite element analysis are consistent. The water elevation, the angel, and the strength of the construction joints were among major variables of investigation. The results indicated that the finite element procedure based on a modified generalized plasticity model and a perfect elastoplastic interface model can be used to evaluate the dislocation damage of face slabs of concrete faced rockfill dam during earthquake. The effects of the water elevation, the angel, and the strength of the construction joints are issues of major design concern under seismic loading.