26 August 2020 in Metallurgical and Materials Transactions B
1 November 2019 in Annals of Nuclear Energy
1 April 2020 in Thermochimica Acta
1 January 2015 in Procedia Engineering
The waste acid residue is limestone neutralized slag in the preparation of acid with pyrometallurgical exhaust in lead production enterprises. There are many hazardous heavy metals in the slag, such as lead, mercury, cadmium, arsenic, etc. It is difficult to remove them from the waste acid residue. The leakage of the heavy metals will gradually get into the groundwater and the soil, contaminate the surrounding environment. However, the waste acid residue can be used to prepare geopolymer in order to solidify the toxic elements. The present experiment aimed to investigate the leakage rate of lead from the geopolymer made by the waste acid residue. The samples were lixiviated by a mixture of sulfuric and nitric acid, with the mass ratio of sulphuric acid/ nitric acid 2:1. The ratio of liquid to solid was 10:1. And the geopolymer was oscillated for 18hours on the turnover oscillation. The leaching of lead under influence of acidic rainfall and then entering into the environment was simulated. The lead in the supernatant of leaching solution under different conditions was analyzed. And the result showed that lead can be well solidified in the geopolymer made by the waste acid residue
23 October 2019 in Polish Journal of Environmental Studies
Stabilizing/Solidifying cadmium in residue is a great challenge to the treatment of solid waste. In this work, a new stabilization process was proposed to dispose of simulated cadmium-bearing-residue (CBR) by using magnesium slag of the same high-hydration and gelling properties as a binder. A sharp decline in cadmium leaching contraction from 1415 mg·L-1 to less than 1 mg·L-1 was obtained in this new process. The XRD, FT-IR and XPS results indicated it was hydration products and silicates produced by magnesium slag that could promote cadmium (Cd) to take place of calcium (Ca) and immobilize cadmium in the residue. The European Community Bureau of Reference (BCR) experiment also discovered that more reducible, oxidizable and residual fraction in favour of restrained environmental availability was produced in the process.
1 December 2014 in Applied Mechanics and Materials
Na2BaMgP2O8 phosphors were synthesized by a standard solid state reaction and their luminescent properties were investigated. The phase structure was analyzed by X-ray powder diffraction measurement. Under the excitation of 365nm, Na2BaMgP2O8:Tb3+, Eu3+ phosphors show two color bands of green and red color due to 5D4−7F5 transition of Tb3+ ions and 5D0−7F2 transition of Eu3+ ions, respectively. The emission intensity of Tb3+ deceased with the increasing concentration of Eu3+, which verified that an effective energy transfer occurred from Tb3+ to Eu3+ in Na2BaMgP2O8 host. The present study indicated that the phosphors have a high potential application in solid state lighting.