In conventional permanent magnet-assisted synchronous reluctance machines, the permanent magnet (PM) torque and reluctance torque are coupled with each other due to the rotor structure, and the ripples of these two torque components are superposed, with few design solutions being applicable to reduce the overall torque ripple. In this paper, an axially-segmented permanent magnet-assisted synchronous reluctance machine, which has a reluctance segment and a PM segment on the rotor, is studied. A method of torque ripple reduction using harmonics superposition is proposed, in which the two torque components generated by the two rotor segments are matched in such a way that their main harmonics have appropriate amplitudes and phases to cancel each other. Motor optimizations with surrogate models based on neural network fitting and interpolation are performed to achieve maximum suppression effect of the torque ripple. Finite element analysis and prototype experiments are conducted, confirming the effectiveness of the method.
17 April 2025 in IEEE Transactions on Industry Applications
In this paper, a fast rotor design method for synchronous reluctance machines (SynRM) is proposed, utilizing partly concentric circular flux barriers. The parametrization model exhibits a design freedom between the classic model with concentric flux barriers and the complete model with non-concentric ones. Moreover, a simple yet efficient equation between the end span angle and thickness of each flux barrier is introduced, based on the Joukowski formulation, which expands the parameter scan range while avoiding redundant rotor geometries, thereby improving time efficiency of the motor optimization. Three models, viz. the classic, complete and proposed, are applied to a same SynRM design and optimization process, employing Evolutionary Algorithm combined with the response surface method. The proposed methodology demonstrates significantly higher fitting accuracy compared to the complete model and achieves superior motor performance relative to the classic model. Finally, a prototype based on the proposed design method is manufactured and tested, validating the effectiveness of the method.
A semi-analytical method is proposed for rapidly calculating the eddy current loss in permanent magnets (PMs) of interior permanent magnet synchronous machines (IPMSMs), incorporating the effects of current harmonics and PM segmentation. The eddy current reaction field is solved with the equivalent magnetic circuit model extracted from finite element (FE) analysis. The internal and external equivalent magnetic circuits of the PM are established respectively, with their parameters determined with FE sweeping and interpolation. The novelty of this work lies in fully considering the eddy current reaction effects, especially the interactions between the eddy current reaction fields in different PMs. The accuracy of the proposed method is validated through FE simulations of a 9-slot 6-pole IPMSM, demonstrating higher computational efficiency than the conventional FE method and higher accuracy than the existing semi-analytical methods. Furthermore, the proposed method is applicable to various winding and rotor configurations.
Post-assembly magnetization (PAM) simplifies the fabrication of permanent magnet machines and pole-by-pole magnetization is adopted when employed in large-scale systems. However, this method inevitably generates stray fields through flux leakage across adjacent magnets, which induce undesired reverse magnetization and significantly increase the power required for subsequent magnetization. This paper proposes a staged PAM strategy with induction heating to reduce the required magnetizing field intensity for the reversely magnetized PMs, utilizing the temperature-dependent characteristics of the Nd-Fe-B magnets. The magnetizing coils are repurposed as induction heating coils using an AC power supply, allowing localized heating of affected PMs to lower their coercivity. An analytical model is developed to guide the selection of AC heating power supply specifications, balancing heating efficiency and duration. Finite element simulations are conducted to validate the loss predictions and evaluate the transient thermal behavior. Finally, experimental results from a 1/12-module of 400 kW 1.61 m outer-diameter prototype verify that full magnetization can be achieved with limited magnetizing current, demonstrating the method’s effectiveness for large-scale PM machine production.