In the context of a continuous increase in plastic waste volumes, recycling polymers has become of paramount importance. The use of mechano-chemical modification allows for the targeted alteration of the secondary polyethylene (SPE) matrix structure and the creation of durable cross-linked composites. Pyrolysis mass-spectrometry (PMS) has been employed to investigate a process of thermal destruction of the SPE, which was modified using hexamethylenetetramine (HMTA). The introduction of powdered HMTA in the polymer matrix on the basis of SPE, with a view to its mechano-chemical modification, leads to structural changes in the polymer matrix, to the formation of cross chemical bonds between macromolecules in SPE, with the participation of the ionic fragments of the collapse of HMTA, and to high content of gel-fraction of compositions, with increasing of content of HMTA in them.
The review article considers the current problem of environmental pollution with polymer waste. To solve one of the highest priority tasks, their recycling is considered, which is advisable from an economic, practical and scientific point of view. An assessment of the resources of secondary polymeric raw materials was made. The main ways of utilization of polymeric waste are given. The features of polymer waste recycling methods are determined. The issues of modification of polymer wastes are considered and the main methods of compatibilization of polymer mixtures are shown. Particular attention is paid to the methods and mechanisms of compatibilization of polymer composites based on recycled thermoplastics and crumb rubber from waste tires as a means of obtaining new composite polymer materials with valuable performance properties. The dependence of the properties of polymer composites on the filler concentration, particle size and shape, surface treatment methods, type and content, modifying additives and compatibilizers is shown. The creation of polymer composites based on secondary polymers and fillers of various nature contributes to the solution of social and economic problems of polymer waste.