9 March 2021 in Polymer journal
The results of pyrolytic mass spectrometry studies of biodegradable polymeric materials based on polyolefins and segmented polyurethanes with various functional additives are summarized. The structure and composition of initial and after exposure in soil, climate chamber and after exposure to microorganisms (bacteria, yeast) composites are characterized. In the research presented, influence of acetates and complexonates of metals, including cobalt, copper and zinc, on the structural changes in the high pressure polyethylene (HPPE) occurring under the impact of factors such as temperature, humidity and UV-radiation is investigated. It was established, that samples of HPPE, modified by cobalt acetate and cobalt and copper complexonates are responsive and most sensitive to the action of above-mentioned physical factors. Investigation of a segmented polyurethanes (SPU) of a different chemical structure influenced by a factors, modeling of the environmental conditions was conducted. It was shown using pyrolytic mass-spectrometry method and monitoring of samples’ weight loss that under the influence of above-mentioned environmental factors in the SPU occurs processes, resulting to changing its micro heterogeneous structure. It is established that SPU having ester links in its structure and being exposured in soil for 120 days is predominantly attacked by microorganisms, then the main active factor appears to be soil’ pH value – after 300 days in soil with alkaline or acid solution SPU sample decomposes into a separate fragments. Features of the chemical structure of urethane polymers synthesized on the base of hydroxylated rapeseed oil (polyol) were examined. Analysis of the results showed that the macromolecular compounds obtained are segmented polyurethanes which thermal degradation occurs in two stages: hard blocks are destroyed at the first stage, while polyol part (soft blocks) decomposes at the second stage, allowing to identify the temperature area of polymer destruction and thus its temperature region of operation. It is shown that the most suitable from the viewpoint of environmental friendly is polyurethane composition containing more than 50% of polyol. Thermal mass-spectrometry (TMS) has been employed to investigate processes of thermal destruction of segmented polyurethane and it’s compositions filled by polysaccharides: starch, dextrin, chitosan. The features of thermal destruction for segmented polyurethane and related compositions before and after their storage in a soil have been determined. Application TMS is shown to permit the processes of biodegradation of polymeric materials to investigate.
2 September 2020 in Polymer journal
20 December 2023 in Polymer journal
A literature review on the production of thermoplastic starch (TPS) with various plasticizing additives as a component of biodegradable polymer compositions was conducted. Plasticizing additives with different functional groups, due to which starch modification occurs, were analyzed. In order to expand the spectrum of functional additives for the formation of TPS, the introduction of acids with different amounts of carboxyl groups: citric, oxalic, oleic, stearic was studied. The technological parameters of thermomechanical processing of starch compositions and the quantitative composition of the components are determined. Physical and mechanical tests of strength and elasticity of film samples of TPS compositions and compatible with synthetic polymer were carried out. In order to obtain the structural characteristics of TPS and TPS films with polyethylene, studies were carried out by IR-Fourier spectroscopy and mass spectrometry. Studies of the effect of UV irradiation on the degradability of TPS compositions after exposure in a climate chamber for 90 days were conducted. It was found that the loss of strength and elasticity of TPS and TPS+PE film samples is (82–90)%, elasticity (60–70)%, depending on plasticizing and structure-forming additives and their amounts.
4 December 2025 in Polymer journal
Thermoplastic starch (TPS) compositions were studied using stearic, lactic, and succinic acids as structural functional additives, with glycerol acting as a plasticizer. The technological aspects of TPS production and their physical and mechanical characteristies were determined. The production of TPS compositions with polyethylene in an 80:20 ratio was investigated, and their degradability under UV irradiation was tested. Structural changes in film-forming compositions with added TPS were analyzed using IR-Fourier spectroscopy and mass spectrometry. Based on the IR spectra, the formation of ester groups in TPS was confirmed due to the addition of acid to starch and thermomechanical treatment. The effect of TPS on the degradability of TPS+PE compositions was assessed using mass spectrometry, focusing on the composition of ion fragments and their intensities.
7 August 2024 in Polymer journal
A polyelectrolyte complex (PEC) of pectin (polyanion) and polyethyleneimine (polycation) at an equimolar ratio of carboxylic to amino groups was synthesized. Based on it, polyelectrolyte-metal complexes (PEMC) were prepared by adsorption of copper and silver ions from 0.1 M aqueous solutions of CuSO4 and AgNO3 salts. The starting materials (pectin, polyethyleneimine), polyelectrolyte complexes, and polyelectrolyte-metal complexes with Cu2+ and Ag+ were characterized by pyrolysis mass spectrometry (PMS). The PMS results (total ionic current, amount of volatile products, their specific intensity) indicate significant differences in the behavior of the studied objects during pyrolysis and confirm the formation of a polyelectrolyte complex between pectin and polyethyleneimine. It was found that PEC is thermally less stable than the starting materials (pectin and PEI), probably due to electrostatic interaction and corresponding redistribution of electron density between atoms in the macromolecules of pectin and PEI due to complexation. Differences in the thermal behavior of copper- and silver-containing PEMC are caused by complexation processes in these compounds and the different chemical structures of the obtained samples. The kinetics of the total ionic current during the pyrolysis of pectin-PEI complexes with Cu2+ at a temperature of 170 °С and with Ag+ at a temperature of 150 °С was studied and it was found that PEMC are thermostable for 30 min at the given temperature. Such PMS results provide evidence for the possibility of forming copper- and silver-containing nanocomposites by thermochemical reduction of Cu2+ or Ag+ ions in the studied polyelectrolyte-metal complexes based on PEC pectin-polyethyleneimine. The previously proposed mechanism of thermochemical reduction of Cu2+ and Ag+ ions during the synthesis of the corresponding nanocomposites was confirmed.
4 December 2025 in Polymer journal
A literature review was conducted on the production of biodegradable film-forming materials made from naturally renewable raw materials with antibacterial properties. The main component ensuring the biodegradability of the compositions is thermoplastic starch. The review also describes the use of synthetic polymers as film-forming components in these compositions, including polybutylene adipate terephthalate, polylactic acid, polycaprolactone, polyethylene, polyvinyl alcohol, and polyvinylpyrrolidone. The antibacterial properties of these materials are achieved by adding chitosan, which is made soluble through treatment with acids such as acetic, lactic, and formic acid, as well as by incorporating medicinal drugs, silver nanoparticles, or essential oils.