1 October 2023 in Physics of Fluids
Experimental research was carried out to investigate the characteristics of tip vortex cavitation (TVC) caused by tip vortex in an oscillating hydrofoil. Shanghai Shipping and Research Institute's looped cavitation tunnel served as the site of the experiments. The hydrofoil used as the test was NACA (National Advisory Committee for Aeronautics) 63820. Two high-speed cameras, one torque sensor, and six hydrophones were employed to capture the cavitation patterns, the torque exerted on the hydrofoil, and the cavitation noise, respectively. The cavitation flow under static angle of attack (AoA) and the dynamic AoA have all been investigated in order to have a better knowledge of the differences between the TVC surrounding these two conditions. The AoA of 8.5°, 10°, and 14.5° and the AoA range of 1.8°–16° were selected for the static condition research and the dynamic condition study, respectively. A tip vortex flow was created between the tip of the stationary hydrofoil and the ceiling of the tunnel test section. To investigate the impact of the cavitation number on the growth of TVC surrounding the pitching hydrofoil, various pressure environments were built up. As for the experiment environment, cavitation numbers 2.47, 2.00, and 1.66 were used. The results indicate: (1) under static conditions, decreasing cavitation and increasing AoA lead to increased stability and topological complexity of TVC. (2) Comparing and analyzing cavitation patterns during the ascending, static, and descending processes reveal that the strongest cavitation intensity during the descending process, followed by static conditions, with the least intensity during the ascending process. (3) The frequency properties under pitching motion include those of each static AoA condition, although the acoustic characteristic of higher AoA has a stronger influence on that of dynamic condition.
6 August 2023 in Renewable Energy
14 July 2024 in Mechanical Systems and Signal Processing
1 August 2022 in IEEE Transactions on Instrumentation and Measurement
Francis turbine is a core energy conversion part and low frequency vibrations caused by unsteady vortex rope in the draft tube may damage the unit through resonance. Therefore, a more comprehensive assessment and monitoring of the status of Francis turbine is of great significance for unit stability. In this hydraulic machinery, mechanical impulses and hydraulic excitation are co-existing. The former manifests as a narrow low frequency band with high kurtosis, while the latter represents a wide high frequency band with energy associated with the vortex rope. Based on that, a novel method coined Convkurgram is proposed to suppress the extreme high kurtosis mechanical components and extract the hydraulic carrier wave efficiently. Besides, it takes multiple information frequency bands into consideration in case of contamination waves exist. Finally, the method is evaluated by means of actual vibration signals collected from the hydroelectric generating unit under normal and cavitation conditions. The results show the proposed method recognizes the characteristic frequency bands of mechanical components and hydraulic carriers as well as extracts the shaft frequency and blade passing frequency successfully.