18 August 2016 in IEEE Transactions on Microwave Theory and Techniques
Ultra-wideband (UWB) pulse Doppler radars can be used for noncontact vital signs monitoring of more than one subject. However, their detected signals typically have low signal-to-noise ratio (SNR) causing significant heart rate (HR) detection errors, as the spurious harmonics of respiration signals and mixed products of respiration and heartbeat signals (that can be relatively higher than heartbeat signals) corrupt conventional fast Fourier transform spectrograms. In this paper, we extend the complex signal demodulation (CSD) and arctangent demodulation (AD) techniques previously used for accurately detecting the phase variations of reflected signals of continuous wave radars to UWB pulse radars as well. These detection techniques reduce the impact of the interfering harmonic signals, thus improving the SNR of the detected vital sign signals. To further enhance the accuracy of the HR estimation, a recently developed state-space method has been successfully combined with CSD and AD techniques and over 10 dB improvements in SNR is demonstrated. The implementation of these various detection techniques has been experimentally investigated and full error and SNR analysis of the HR detection are presented.
15 February 2017 in IEEE Transactions on Microwave Theory and Techniques
In this paper, we compare the performance of radar and optical (camera based) techniques in detecting vital signs such as respiratory rate (RR), heart rate (HR), and blood oxygen saturation (SpO 2 ). Specifically, we investigate the application of ultrawideband stepped-frequency continuous-wave radar and imaging photoplethysmography (iPPG) techniques to measure vital signs. The radar performance can be enhanced by using phase information of backscattered signal instead of its amplitude. On the other hand, the iPPG system can be enhanced by using more than one camera and utilizing very selective narrowband filters coupled with good illumination. In either system, use of advanced signal processing is required to improve accuracy. Generally, HR and RR can be accurately read by either microwave radar or optical techniques with 500 lx illumination level to have <; ±2% error up to 2 m distance between the subject and the system, but optical technique errors increase significantly to <; ±15% for <;200 lx. However, each system has its unique advantages as the radar can be used for seeing-through walls and optical technique is uniquely capable of measuring SpO 2 ).
2 March 2018 in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
An electromagnetic model for heart rate and respiration rate detection using the scattered fields of incident plane waves on a dielectric model of a human subject has been developed. The model approximates the torso by an equivalent homogenous dielectric layer, and utilizes an accelerated parallel version of the multi-level fast multipole algorithm to speed up the computation. Non-contact measurements using an ultra-wideband radar is utilized to experimentally validate the model. The model proved to be accurate for both heart rate and respiration rate detection within 5% error margin when compared to conventional contact sensor readings. The agreement between measured and simulated results is good for distances up to 3 m, and at various subject orientations with respect to the radar boresight. Meanwhile, in the presence of more than one subject, only slight degradation has been observed unless one subject is almost blocked by another. This accurate model would have broader impacts as it can be utilized to investigate various human activities and motion scenarios, and can be used, as well, to fine tune the signal processing techniques and radar system development.
8 May 2018 in IEEE Transactions on Microwave Theory and Techniques
In this paper, ultra-wideband (UWB) Doppler radar signatures from walking human subjects are processed with the state-space method (SSM) to analyze compressed radar echoes for the first time. A new mathematical model is proposed to detect the human walking strides using UWB radar, while micro-Doppler (μ-D) features are extracted for gait analysis using short-time SSM (STSSM). To distinguish μ-D signatures of different subjects' body parts, the SSM used for the characterization of radar target signatures and sensor fusion is applied on a sliding short-time window to enhance the resolution of feature extraction from data collected on a dismount. This method of the application of SSM to sliding short-time data is validated with a full-wave electromagnetic (EM) simulation of a walking subject using the Boulic model that represents the human kinematics. An EM scattering model is then utilized to compare the performance of a short-time Fourier transform with STSSM. Experimental results show that STSSM can be successfully applied to identify multiple μ-D trajectories in real experimental data, thus demonstrating the capability to positively identify human motions (right foot, left foot, and torso) even in a low signal-to-noise ratio environment.