5 September 2022 in PRZEGLĄD ELEKTROTECHNICZNY
The article is devoted to the study of motion laws for rotary vibration crusher. Kinematic and dynamic analysis was performed. Differential equations of rotor motion are solved and analyzed, frequency response and energy consumption graphs in MathCad 15.0 software environment are presented. Verification of the mathematical model was carried out by comparing the results of experimental research with theoretical research. It was proved that the proposed mathematical models are adequate (discrepancy are 7.2 to 12.1%).
30 June 2022 in Polityka Energetyczna – Energy Policy Journal
Diesel generator engines operate in wide load modes; therefore, it is necessary to change the percentage of the mixture of diesel and biodiesel fuel depending on the operating mode of the engine; this ensures its technical performance at the required level in all operating modes, including...
23 February 2022 in Herald of Khmelnytskyi National University. Technical sciences
VUVinnytsia National Agrarian University
Vinnytsia National Agrarian University
The switching scheme of operation of the machine-tractor unit with the use of the power supply system with the fuel mixer and the electronic control unit on the basis of Arduino Uno is presented. This scheme provides a fully adaptive power supply system for biofuels and their mixtures depending on the load-speed indicators and operating modes. The selection of circuit components is carried out. A linear algorithm for writing a control program for the engine power system has been developed, which ensures its energy efficiency and efficiency of the machine-tractor unit. During the operation of the machine-tractor unit there is a constant change of thermal, loading and speed modes. Internal combustion engines during operation usually operate in unstable modes – start, warm up, acceleration, braking, increase and decrease the load, stop. There is a need to develop a method of controlling the work processes of the diesel engine for its operation on a mixture of BF and PSU with electronic control of the fuel mixture depending on the operating modes. Engines are dynamically asymmetrical objects, ie the processes that take place when increasing and decreasing the load on the crankshaft, when starting and stopping the engine, differ from each other. The development of the algorithm for controlling the working processes of the diesel engine when working on a mixture of BF and PSU with electronic control of the fuel mixture depending on the operating modes of the engine will differ. Technical parameters of the diesel engine and power supply system that must be controlled during operation: torque, crankshaft speed, power, coolant temperature, PSU temperature, percentage of fuel mixture. Fuel consumption refers to economic indicators, to environmental – the composition and amount of harmful emissions. The value of these indicators directly depends on the modes of operation.
25 August 2023 in Engineering, Energy, Transport AIC
Turbulent fluid mixing is an important aspect of many industrial and technological processes where efficient mixing of various components is of paramount importance to achieve the desired results. Optimal mixing can improve product quality, ensure the unity of complex reactions, and reduce process lead times. In this regard, the study and understanding of the influence of the geometry of the mixer on the characteristics of the turbulent flow becomes an urgent task of scientific research. The relevance of the study is explained by the wide application of mixers in industrial and technological processes, where the efficiency of mixing is crucial for achieving optimal results. The work used methods of experimental and numerical modeling of turbulent flow in various geometric configurations of blade mixers. Indicators such as turbulence intensity, pressure gradient, and fluid mixing ratio were used to quantify the turbulent characteristics. The obtained results demonstrate that the geometric configuration of the blade mixer has a significant effect on the formation of the turbulent flow. Some geometric parameters of the mixer can contribute to increasing the intensity of liquid mixing, while others can reduce its efficiency. Scientific results can be useful for designing optimal paddle mixers for specific industrial tasks that require intensive liquid mixing. The use of optimized mixers can help increase process productivity, save energy resources, and improve product quality.
30 August 2022 in Engineering, Energy, Transport AIC
The analysis of tools for uncultivated and surface tillage shows that the market of agricultural machinery lacks universal units that can reliably and efficiently perform both types of tillage with one machine. To assess the validity of the unit baseline model, field studies were conducted, during which key agronomic indicators of tillage quality were identified. Studies have shown that the rate of uncultivated soil exceeds 6.5 km / h, and the degree of soil cracking - more than 80%. At small tillage to a depth of 12 cm at operating speeds over 7.0 km / h. The use of additional working bodies will allow to form on the basis of the basic model of the unit narrower options for a particular car. The optimal design parameters of the proposed plowing unit, in addition to the plow width of 4.5 m, include rollers of the same width to level the plow surface and the capacity of the fertilizer hopper 4 m3. Technical parameters in the process: plow depth α = 0.2 m, soil resistance coefficient Km = 30 kN/m2, working area Lp = 1000 m. surface treatment will reduce yields. The energy model of functioning of the agricultural subdivision is presented. Studies have shown that by optimizing the ratio of tractor weight to engine power, you can increase the productivity of agricultural units. For stubble cultivation with a normal humidity of 8 km / h, with a permissible slip of 10%, the optimal parameters for a class 1.4 wheeled tractor will be the working weight m = 4790 kg and engine power N = 69.0 kW. In this case, the thrust will correspond to the 2nd thrust class.