Mixed (FAPbI3)0.92(MAPbBr3)0.08 perovskite thin films exhibit strong nonlinear optical responses, rendering them promising candidates for applications in photonics and optical communications. In this work, we present a systematic study on the ultrafast third-order nonlinear optical processes in mixed perovskite nanocrystals (NCs) by exploring the generation of third harmonic radiation and giant two-photon absorption-based photoluminescence (PL) when excited by femtosecond laser pulses of a 1030 nm central wavelength. A comparative analysis of the coherent third harmonic generation in the thin-film-containing perovskite nanocrystals has shown a 40× enhancement of the third harmonic signal compared to the signal generated in the pure quartz substrate. The cubic dependence of the third-nonlinear optical response of the (FAPbI3)0.92(MAPbBr3)0.08 perovskites on the intensity of the driving radiation was identified using broadband 38 femtosecond driving pulses. The positive nonlinear refractive index (γ = +1.4 × 10−12 cm2·W−1) is found to play an important role in improving the phase-matching conditions of the interacting pulses by generating a strong third order harmonic. The giant two-photon absorption (TPA)-assisted PL peak was monitored and a blue shift of the PL was obtained in the higher intensity range of the laser pulses, with the absorption coefficient β estimated to be~+7.0 cm·MW−1 at a 1030 nm laser wavelength.
Halide anion migration in organic–inorganic metal halide perovskites significantly influences the power conversion efficiency (PCE) and hysteresis of perovskite solar cells (PSCs). These materials are sensitive to various external stimuli such as light, heat, and electrical bias, highlighting the need for novel post‐manufacturing treatment methods alongside a deeper understanding of their mechanisms. Here, a dark electro (DE) treatment is introduced that applies a negative‐positive‐negative bias to PSC under dark conditions, which is particularly effective for formamidinium (FA) lead iodide (FAPbI3) PSCs processed with a methylammonium chloride (MACl) additive. The DE treatment, followed by light soaking, results in an average PCE increase of 2.9 ± 1.8% (from an initial 18.2 ± 2.0% to 21.1 ± 0.8% after treatment) with a notable decrease in deviation. It is discovered that residual chloride anions from MACl play a critical role in the DE treatment. The migration of halide anions under a shaking electric bias is investigated using energy‐dispersive X‐ray spectroscopy (EDX) and time‐of‐flight secondary ion mass spectroscopy (TOF‐SIMS). This study elucidates the distribution and impact of residual chloride anions, providing insights into the mechanisms underlying the DE treatment.
The widespread use of tin dioxide (SnO2) thin films as electron transport layer (ETL) of perovskite solar cells (PSCs) has been facilitated by commercial SnO2 nanocolloid dispersion. Nevertheless, challenges such as nanoparticle agglomeration have emerged, impacting film quality and interface properties critical for PSC performance. Herein, the efficacy of sequential, multistep spin‐coating of repeatedly diluted SnO2 aqueous suspension as a simple and effective approach to enhance ETL properties is explored. Through systematic experiments using dynamic light scattering, cyclic voltammetry, optical spectroscopy, and photoconductivity, it is demonstrated that the sequential deposition significantly improves the flatness and coverage of SnO2, leading to improved electron transport and transfer from a perovskite layer. Such a synergetic effect enables to fabricate lead iodide PSC (FAPbI3, FA: formamidinium) with a power conversion efficiency of 22.99% compared to 20.48% for the conventional 1‐step SnO2 layer. The findings underscore the potential of sequential SnO2 deposition as a promising technique for robust SnO2 films of photoelectric conversion devices.
27 March 2023 in Materials Science in Semiconductor Processing
Tin-based halide perovskite solar cells (Sn PSCs) have unacceptably low open-circuit voltages owing to the severe carrier traps induced by the facile oxidation of Sn2+. To prevent oxidation, Sn powder is often added to the precursor solutions; however, the optimal process conditions and the detailed underlying mechanism remain elusive. Here, the PSC precursors (Sn powder, SnF2, SnI2, and organic cation iodides) are subjected to mechanochemical pretreatment to enhance the power conversion efficiency (PCE) of PEA0.1FA0.9SnI3 PSCs (PEA: phenylethylammonium and FA: formamidinium). Two systems are compared: the Sn powder–SnF2 (Sn–SnF2) system and all-chemical system, both ground using a vibrational ball-milling technique. The grinding temperature (5–28 °C) and duration (0.5–9 h) are found to significantly affect the PCEs. The processes with 4 h of grinding of Sn–SnF2 at 13 °C followed by 1 h of thermal annealing (TA) at 170 °C and 2 h of grinding of the all-chemical sample without TA yield the highest PCEs of 7.76 and 7.60%, respectively, compared to 5.24% for the control (no grinding). The assumed mechanochemical reactions provide a rationale for the preferred low-temperature grinding process. An efficient and reliable method with accelerated reduction of SnI4 in dimethyl sulfoxide and improved oxygen tolerance of Sn PSCs, both resulting from grinding, is proposed for the preparation of lead-free PSCs.