Jinha Lim

Jinha Lim

Auto-generated profile, based on publicly available information

Jinha Lim

School of Electrical Engineering, KAIST, Daejeon, Republic of Korea

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 December 2016 in Nanoscale
Verified
Journal Article
Closed access
PDF file
YYYoung Jin Yoo
Young Jin Yoo
JLJin Ha Lim
Jin Ha Lim
GLGil Ju Lee
Gil Ju Lee
KJKyung-In Jang
Kyung-In Jang
Young Min SongYoung Min Song
Young Min Song
We demonstrate ultra-thin, fine-tunable optical coatings with enhanced color purity based on highly absorbent porous media on a metal substrate. We show that the color range provided by these ultra-thin film coatings can be extended by making the absorptive dielectric layer porous. Oblique angle deposition (OAD) of a thin (10–25 nm) germanium (Ge) film by e-beam evaporation onto a thick gold substrate yields controlled porosity. Reflectance spectra and color representations from both calculations and experiments verify the enhancement of resonance tunability and color purity in the nano-tailored coatings. Angle independent reflection properties, and the applicability of such porous Ge on various metal substrates, indicate the strength of these concepts.

19 March 2025 in Light: Science & Applications
Verified
Journal Article
Open access
PDF file
JSJoonsup Shim
Joonsup Shim
JLJinha Lim
Jinha Lim
IKInki Kim
Inki Kim
JJJaeyong Jeong
Jaeyong Jeong
BKBong Ho Kim
Bong Ho Kim
SangHyeon KimSangHyeon Kim
SangHyeon Kim
Waveguide-integrated mid-infrared (MIR) photodetectors are pivotal components for the development of molecular spectroscopy applications, leveraging mature photonic integrated circuit (PIC) technologies. Despite various strategies, critical challenges still remain in achieving broadband photoresponse, cooling-free operation, and large-scale complementary-metal-oxide-semiconductor (CMOS)-compatible manufacturability. To leap beyond these limitations, the bolometric effect – a thermal detection mechanism – is introduced into the waveguide platform. More importantly, we pursue a free-carrier absorption (FCA) process in germanium (Ge) to create an efficient light-absorbing medium, providing a pragmatic solution for full coverage of the MIR spectrum without incorporating exotic materials into CMOS. Here, we present an uncooled waveguide-integrated photodetector based on a Ge-on-insulator (Ge-OI) PIC architecture, which exploits the bolometric effect combined with FCA. Notably, our device exhibits a broadband responsivity of 28.35%/mW across 4030–4360 nm (and potentially beyond), challenging the state of the art, while achieving a noise-equivalent power of 4.03 × 10−7 W/Hz0.5 at 4180 nm. We further demonstrate label-free sensing of gaseous carbon dioxide (CO2) using our integrated photodetector and sensing waveguide on a single chip. This approach to room-temperature waveguide-integrated MIR photodetection, harnessing bolometry with FCA in Ge, not only facilitates the realization of fully integrated lab-on-a-chip systems with wavelength flexibility but also provides a blueprint for MIR PICs with CMOS-foundry-compatibility.

19 April 2022 in IEEE Photonics Journal
Verified
Journal Article
Open access
JLJinha Lim
Jinha Lim
JSJoonsup Shim
Joonsup Shim
DGDae-Myeong Geum
Dae-Myeong Geum
SangHyeon KimSangHyeon Kim
SangHyeon Kim
We first demonstrated a slot waveguide based on a Ge-on-Si (GOS) platform with a 3 μm thickness of the Ge in the mid-infrared wavelength range at 4.2 μm. We numerically designed the slot waveguide to have a large field confinement in the slot for sensing application. Based on the design, we fabricated the GOS slot waveguide with a slot gap of 200 nm, which is coupled with in-out grating couplers. We characterized the propagation loss of the waveguides by the cut-back method and carefully compared it with channel waveguides. In fundamental TE mode, the propagation loss in the channel waveguide and the slot waveguide were quite similar (5.20 and 4.86 dB/cm, respectively), whereas the field confinement was much higher in the slot waveguides. Additionally, we simulated and analyzed the loss of the devices in terms of radiation, sidewall roughness scattering, material absorption by free-carrier absorption (FCA), and CO 2 . These results strongly suggest that the fabricated slot waveguide based on the GOS platform would be one of the promising building blocks for the optical gas sensor platform.

10 January 2023 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
JLJinha Lim
Jinha Lim
JSJoonsup Shim
Joonsup Shim
IKInki Kim
Inki Kim
SKSeong Kwang Kim
Seong Kwang Kim
HLHyeongrak Lim
Hyeongrak Lim
SangHyeon KimSangHyeon Kim
SangHyeon Kim
We experimentally demonstrate a low-loss Ge-on-insulator (Ge-OI) passive waveguide with low absorptive yttrium oxide (Y 2 O 3 ) as an insulator for a photonic platform using a wafer-bonding technology at mid-infrared (MIR) wavelength. The lowest propagation losses of 0.84 dB/cm for a channel waveguide (ChW) and 1.79 dB/cm for a slot waveguide with a slab under the slot (s-SlW) were obtained in fundamental transverse-electric (TE) mode at 4.2 μm wavelength. We also designed additional passive circuits such as grating couplers and mode converters for the implementation of the platform. For an optical gas sensor using the platform, the narrow core width of the ChWs and nanoscale of slot gap of the s-SlWs have been derived based on the numerical design toward high optical confinement, and these were fabricated and systematically analyzed to minimize the propagation loss. From the comparison for loss measurement between a nitrogen (N 2 ) ambient and a carbon dioxide (CO 2 ) containing normal atmosphere at 4.2 μm wavelength, as a consequence, narrow ChW and s-SlW showed quite high additional optical loss by the CO 2 absorption, revealing high potential as an optical gas sensor. In conclusion, we believe that this Ge-OI platform can be a very promising candidate for the optical sensor in terms of low-loss and high-confinement properties.

1 November 2023 in Photonics Research
Verified
Journal Article
Closed access
JLJinha Lim
Jinha Lim
JSJoonsup Shim
Joonsup Shim
IKInki Kim
Inki Kim
SangHyeon KimSangHyeon Kim
SangHyeon Kim
We experimentally demonstrate an all-pass microring resonator (MRR) based on a Y2O3 BOX germanium-on-insulator (GeOI) platform operating in the mid-IR region. The ring resonator was numerically designed to have a high quality (Q) factor in the 4.18 μm to 4.22 μm wavelength range in the fundamental TE mode. According to our design, the GeOI ring resonator was fabricated by the direct wafer-bonding technology with an yttria (Y2O3) buried oxide layer, which is transparent at the mid-IR region, for the bonding interface and the electron beam lithography. The experimental resonant characteristic was obtained using our fiber-based mid-IR measurement setup. The GeOI single MRR exhibited an extinction ratio (ER) of 15.28 dB and an insertion loss (IL) of 1.204 dB, and the racetrack showed an ER of 22.77 dB and an IL of 0.627 dB. Furthermore, the free spectral range of the device was 5.29 nm, and the loaded Q factor of 94,528 (176,158 of intrinsic Q factor) was extracted by the nonlinear least squares method. We believe this demonstration of our GeOI MRR offers a valuable opportunity to implement multipurpose devices such as optical sensors, switches, and filters in the mid-IR range.

4 November 2022 in Optics Express
Verified
Journal Article
Closed access
JSJoonsup Shim
Joonsup Shim
JLJinha Lim
Jinha Lim
DGDae-Myeong Geum
Dae-Myeong Geum
JYJong-Bum You
Jong-Bum You
HYHyeonho Yoon
Hyeonho Yoon
SangHyeon KimSangHyeon Kim
SangHyeon Kim
Conventional photon detectors necessarily face critical challenges regarding strong wavelength-selective response and narrow spectral bandwidth, which are undesirable for spectroscopic applications requiring a wide spectral range. With this perspective, herein, we overcome these challenges through a free-carrier absorption-based waveguide-integrated bolometer for infrared spectroscopic sensors on a silicon-on-insulator (SOI) platform featuring a spectrally flat response at near-infrared (NIR) range (1520-1620 nm). An in-depth thermal analysis was conducted with a systematic investigation of geometry dependence on the detectors. We achieved great performances: temperature coefficient of resistance (TCR) of -3.786%/K and sensitivity of -26.75%/mW with a low wavelength dependency, which are record-high values among reported waveguide bolometers so far, to our knowledge. In addition, a clear on-off response with the rise/fall time of 24.2/29.2 µs and a 3-dB roll-off frequency of ∼22 kHz were obtained, sufficient for a wide range of sensing applications. Together with the possibility of expanding an operation range to the mid-infrared (MIR) band, as well as simplicity in the detector architecture, our work here presents a novel strategy for integrated photodetectors covering NIR to MIR at room temperature for the development of the future silicon photonic sensors with ultrawide spectral bandwidth.