19 March 2025 in Light: Science & Applications
Waveguide-integrated mid-infrared (MIR) photodetectors are pivotal components for the development of molecular spectroscopy applications, leveraging mature photonic integrated circuit (PIC) technologies. Despite various strategies, critical challenges still remain in achieving broadband photoresponse, cooling-free operation, and large-scale complementary-metal-oxide-semiconductor (CMOS)-compatible manufacturability. To leap beyond these limitations, the bolometric effect – a thermal detection mechanism – is introduced into the waveguide platform. More importantly, we pursue a free-carrier absorption (FCA) process in germanium (Ge) to create an efficient light-absorbing medium, providing a pragmatic solution for full coverage of the MIR spectrum without incorporating exotic materials into CMOS. Here, we present an uncooled waveguide-integrated photodetector based on a Ge-on-insulator (Ge-OI) PIC architecture, which exploits the bolometric effect combined with FCA. Notably, our device exhibits a broadband responsivity of 28.35%/mW across 4030–4360 nm (and potentially beyond), challenging the state of the art, while achieving a noise-equivalent power of 4.03 × 10−7 W/Hz0.5 at 4180 nm. We further demonstrate label-free sensing of gaseous carbon dioxide (CO2) using our integrated photodetector and sensing waveguide on a single chip. This approach to room-temperature waveguide-integrated MIR photodetection, harnessing bolometry with FCA in Ge, not only facilitates the realization of fully integrated lab-on-a-chip systems with wavelength flexibility but also provides a blueprint for MIR PICs with CMOS-foundry-compatibility.
1 October 2024 in APL Photonics
We present a thermally tunable microring resonator (MRR) implemented on a Ge-on-insulator (Ge-OI) photonic platform tailored for mid-infrared spectrometer applications. Thanks to the favorable thermo-optic effect of Ge, we characterized the optical and thermal properties of the thermally tunable Ge-OI MRR through rigorous optical and thermal numerical analyses. Building upon the simulation, a ring-shaped Au heater was successfully integrated into the Ge-OI MRR that was fabricated by using a direct wafer bonding process, followed by electron-beam lithography and dry etching techniques. Observations via thermo-reflectance microscopy revealed the temperature change within the Ge induced by heat transfer from the applied bias to the Au heater. Notably, the measured temperature change of 17 K at an applied electrical power of 181.7 mW closely aligned with the simulated values. In optical measurement, the heater-integrated Ge-OI MRR exhibited the tunability of 33.7 nm/W (0.36 nm/K) and the loaded Q factor of 21k at 4.2 µm wavelength with no bias. Hence, our demonstration of the Ge-OI tunable ring filter for mid-IR spectrometers could be a promising technology employing photonic integrated circuits for diverse applications in optical communication and spectral sensing.
20 February 2025 in IEEE Transactions on Electron Devices
The mid-infrared (MIR) on-chip spectroscopy has emerged as a promising solution to overcome the limitations of traditional bulky optical gas sensors. However, achieving the stringent limit of detection (LoD) required for various applications remains a significant challenge. The LoD of on-chip spectrometers is closely tied to the performance of key optical components, particularly the detectors. Here, we demonstrate a highly sensitive free-standing waveguide-integrated bolometer on a germanium-on-insulator platform. The device leverages an air trench structure for enhanced thermal isolation, significantly boosting thermal efficiency and ensuring thermal stability. As a result, we achieved a remarkable noise equivalent power (NEP) of 2.7 × 10-8 W/Hz1/2 at room temperature, outperforming previously reported MIR waveguide-integrated bolometers. The design leverages free-carrier absorption (FCA) for heat generation and employs Ti/TiOx as the bolometric material, ensuring that only CMOS-compatible materials are utilized throughout the fabrication process. As a result, this work paves the way for the realization of high-performance mid-IR on-chip spectrometers, capable of operating across a wide wavelength range of up to 13 μm.
31 July 2024 in Research Square
Waveguide-integrated mid-infrared (MIR) photodetectors are pivotal components for the development of molecular spectroscopy applications, leveraging mature photonic integrated circuit (PIC) technologies. Despite various strategies, critical challenges still remain in achieving broadband photoresponse, cooling-free operation, and large-scale complementary-metal-oxide-semiconductor (CMOS)-compatible manufacturability. To leap beyond these limitations, the bolometric effect – a thermal detection mechanism – is introduced into the waveguide platform. More importantly, we pursue a free-carrier absorption (FCA) process in germanium (Ge) to create an efficient light-absorbing medium, providing a pragmatic solution for full coverage of the MIR spectrum without incorporating exotic materials into CMOS. Here, we present an uncooled waveguide-integrated photodetector based on a Ge-on-insulator (Ge-OI) PIC architecture, which exploits the bolometric effect combined with FCA. Notably, our device exhibits a broadband responsivity of ~ 12 mA/W across 4030–4360 nm (and potentially beyond), challenging the state of the art, while achieving a noise-equivalent power of 3.4×10− 9 W/Hz0.5 at 4180 nm. We further demonstrate label-free sensing of gaseous carbon dioxide (CO2) using our integrated photodetector and sensing waveguide on a single chip. This approach to room-temperature waveguide-integrated MIR photodetection, harnessing bolometry with FCA in Ge, not only facilitates the realization of fully integrated lab-on-a-chip systems with wavelength flexibility but also provides a blueprint for MIR PICs with CMOS-foundry-compatibility.