20 September 2018 in IEEE Electron Device Letters
Oxide semiconductors are ideal candidates for flexible and transparent electronics. Here, we report complementary inverters based on p-type tin monoxide and n-type indium-gallium-zinc-oxide thin-film transistors. The inverters have a gain of 63 at a supply voltage, V DD , of 1.5 V with a maximum static power consumption of 15.6 nW, and a gain of 226 at V DD of 3.0 V with a maximum power consumption of 241.2 nW. A five-stage ring oscillator (RO) based on the complementary inverters is able to operate at 1.04 kHz with full amplitude oscillations at V DD of 1.5 V. All the inverters and RO are fabricated on silicon wafers but at a maximum processing temperature of 225 °C, so that the results are relevant to possible flexible applications. The extremely low power consumption of nanowatt, high gain, kHz operation, and possible flexibility of the fabricated complementary components is well suited to meet the requirements of wearable electronics, Internet of Things technology, and so on.
22 August 2018 in IEEE Transactions on Electron Devices
High-performance flexible InGaZnO-based Schottky diodes are fabricated on polyethylene terephthalate (PET) and polyimide (PI) substrates at room temperature without any thermal treatment. The diode performance improves significantly by either oxygen plasma or UV-ozone treatment on Pd anode. X-ray photoelectron spectroscopy indicates that both treatments lead to Pd surface oxidation. The oxygen plasma treatment results in more complete oxidation, and thus ensures better oxygen stoichiometry at the Schottky interface and a higher anode work function. This leads to high performance with on/off ratios of 7.3 × 10 6 and 2.6 × 10 4 , barrier heights of 0.79 and 0.76 eV, and ideality factors of 1.22 and 1.19 on PET and PI, respectively. Interestingly, these flexible diodes show improved performance after storing in ambient air for two years, and fittings on the reverse currents indicate an improved barrier uniformity. The flexible diode on PET after a two-year storage achieves a high on/off ratio of 2 107, a large barrier height of 0.80 eV, a close to unity ideality factor of 1.09, a high breakdown voltage of -7.5 V, and robust performance upon outward or inward bending, which is, to the best of our knowledge, the highest performance in reported flexible diodes to date.
10 May 2021 in IEEE Electron Device Letters
P-type tin monoxide (SnO) thin-film phototransistors were developed with high photoresponsivity of 2.94×10 5 A/W and high detectivity of 1.82×10 14 Jones, and these values are, to the best of our knowledge, among the highest for the reported oxide-semiconductor-based phototransistors. The excellent performances of these phototransistors were further demonstrated by incorporating the devices into a 10×10 array to successfully image a letter “A” pattern. Furthermore, by integration of n-type indium gallium zinc oxide and p-type SnO thin-film phototransistors, we realized a complementary photosensitive inverter. The inverter exhibits excellent photoresponse with a high voltage gain rate change of 194%. Our results indicates that the SnO based phototransistors have great potential in thin-film photoelectronic circuits and systems.
3 August 2018 in IEEE Electron Device Letters
A carving, cutting, and flip-chip bonding process is proposed for the fabrication of flexible electric double layer transistors (EDLTs) with low cost. Solution processed poly(styrenesulfonic acid sodium salt) is used as a gate dielectric. The large EDL-specific capacitance ( $4.5~\mu \text{F}$ /cm 2 at 20 Hz) can induce very high charge carrier density in the InGaZnO (IGZO) channel layer, enabling the EDLTs to operate at a single-battery-drivable low voltage of 1.0 V with a high on-current of 10 −4 A. The effect of IGZO layer thickness on the performance of EDLTs was investigated. The flexible EDLT with optimized IGZO thickness of 100 nm has achieved a high on/off ratio of $1.4 \times 10^{7}$ , a low threshold voltage of 0.51 V, a saturated field-effect mobility of 1.14 cm 2 /Vs, and high positive gate bias stress stability. Furthermore, the achieved subthreshold swing, 76 mV/dec, is very close to the theoretical ideal minimum value.
23 October 2018 in IEEE Electron Device Letters
Static random access memory (SRAM) is essential for cache memory. Although oxide semiconductors are ideal candidate materials for next generation flexible electronics, complementary SRAM based on oxide semiconductors has not yet been demonstrated. Here, we reported an SRAM with a traditional 6-transistor structure based on n-type indium gallium zinc oxide and p-type tin monoxide. A cell area of only 130 × 160 μm2 has been achieved, and is the smallest among the reported values of SRAMs based on flexible semiconductors. Both traditional static voltage characteristic and N-curve methods are applied to analyse the noise margin level of the cell. The former method demonstrates a high noise margin of 1.43 V in read at VDD of 8 V, and the latter demonstrates static current and voltage noise margins of 13 μA and 2.05 V, respectively. In addition, the SRAM cell shows rather short writing time of 121 and 82 μs for high and low writing states, respectively. This high performance complementary SRAM based on all oxide semiconductors indicates its high application potential in large-scale flexible electronics for data storage and processing.
6 September 2014 in Optics Communications