Chi-Shuen Lee

Chi-Shuen Lee

Auto-generated profile, based on publicly available information

Chi-Shuen Lee

Department of Electrical Engineering, Stanford University, Stanford, CA, USA

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 August 2015 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
CLC.-S. Lee
C.-S. Lee
EPE. Pop
E. Pop
AFA. D. Franklin
A. D. Franklin
WHW. Haensch
W. Haensch
HWH.-S. P. Wong
H.-S. P. Wong
We present a data-calibrated compact model of carbon nanotube (CNT) FETs (CNTFETs) based on the virtual-source (VS) approach, describing the intrinsic current-voltage and charge-voltage characteristics. The features of the model include: 1) carrier VS velocity extracted from experimental devices with gate lengths down to 15 nm; 2) carrier effective mobility and velocity depending on the CNT diameter; 3) short channel effect such as inverse subthreshold slope degradation and drain-induced barrier lowering depending on the device dimensions; and 4) small-signal capacitances including the CNT quantum capacitance effect to account for the decreasing gate capacitance at high gate bias. The CNTFET model captures the dimensional scaling effects and is suitable for technology benchmarking and performance projection at the sub-10-nm technology nodes.

29 December 2015 in Computer
Verified
Journal Article
Closed access
MAMohamed M. Sabry Aly
Mohamed M. Sabry Aly
MGMingyu Gao
Mingyu Gao
GHGage Hills
Gage Hills
CLChi-Shuen Lee
Chi-Shuen Lee
GPGreg Pitner
Greg Pitner
SMSubhasish Mitra
Subhasish Mitra
Next-generation information technologies will process unprecedented amounts of loosely structured data that overwhelm existing computing systems. N3XT improves the energy efficiency of abundant-data applications 1,000-fold by using new logic and memory technologies, 3D integration with fine-grained connectivity, and new architectures for computation immersed in memory.

14 August 2015 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
CLChi-Shuen Lee
Chi-Shuen Lee
EPEric Pop
Eric Pop
AFAaron D. Franklin
Aaron D. Franklin
WHWilfried Haensch
Wilfried Haensch
HWH.-S. Philip Wong
H.-S. Philip Wong
We present a data-calibrated compact model of carbon nanotube (CNT) FETs (CNFETs), including contact resistance, direct source-to-drain, and band-to-band tunneling currents. The model captures the effects of dimensional scaling and performance degradations due to parasitic effects, and is used to study the tradeoffs between the drive current and the leakage current of CNFETs according to the selection of CNT diameter, CNT density, contact length, and gate length for a target contacted gate pitch. We describe a co-optimization study of CNFET device parameters near the limits of scaling with physical insight, and project the CNFET performance at the 5-nm technology node with an estimated contacted gate pitch of 31 nm. Based on the analysis, including parasitic resistance, capacitance, and tunneling leakage current, a CNT density of 180 CNTs/μm will enable the CNFET technology to meet the International Technology Roadmap for Semiconductors target of drive current (1.33 mA/μm), which is within reach of modern experimental capabilities.

28 September 2018 in IEEE Transactions on Nanotechnology
Verified
Journal Article
Closed access
GHGage Hills
Gage Hills
MBMarie Garcia Bardon
Marie Garcia Bardon
GDGerben Doornbos
Gerben Doornbos
DYDmitry Yakimets
Dmitry Yakimets
PSPieter Schuddinck
Pieter Schuddinck
SMSubhasish Mitra
Subhasish Mitra
Carbon Nanotube Field-Effect Transistors (CNFETs) are highly promising to improve the energy efficiency of digital logic circuits. Here, we quantify the Very-Large-Scale Integrated (VLSI) circuit-level energy efficiency of CNFETs vs. advanced technology options (ATOs) currently under consideration (e.g., silicon-germanium (SiGe) channels and progressing from today's FinFETs to gate-all-around nanowires/nanosheets). We use industry-practice physical designs of digital VLSI processor cores in future technology nodes with millions of transistors (including effects from parasitics and interconnect wires) and technology parameters extracted from experimental data. Our analysis shows that CNFETs are projected to offer 9× energy-delay product (EDP) benefit (~3× faster while simultaneously consuming ~3× less energy) compared to Si/SiGe FinFET. The ATOs provide $\lt50\%$ EDP benefits. All analyses are performed at the same off-state leakage current density ( $\le100$ nA per micron of FET width) and power density ( $\le100$ Watts per $\rm cm^2$ of chip area). This analysis provides insights into the sources of CNFET EDP benefits and addresses key questions for deeply-scaled technologies. For instance, while contact resistance is a concern for sub-10 nm nodes, CNFETs still provide up to (6.0×) EDP benefit (vs. Si/SiGe FinFETs) using CNFET contact resistance values already experimentally achieved for 9 nm contact length

7 May 2013 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
JLJieying Luo
Jieying Luo
LWLan Wei
Lan Wei
CLChi-Shuen Lee
Chi-Shuen Lee
AFAaron D. Franklin
Aaron D. Franklin
XGXimeng Guan
Ximeng Guan
HWH.-S. Philip Wong
H.-S. Philip Wong
A semianalytical carbon nanotube field-effect transistor (CNFET) model based on the virtual-source model is presented, which includes series resistance, parasitic capacitance, and direct source-to-drain tunneling leakage. The model is calibrated with recent experimental data down to 9-nm gate length. Device performance of 22- to 7-nm technology nodes is analyzed. The results suggest that contact resistance is the key performance limiter for CNFETs; direct source-to-drain tunneling results in significant leakage due to low effective mass in carbon nanotubes and prevents further downscaling of the gate length. The design space that minimizes the gate delay in CNFETs subject to OFF-state leakage current (IOFF) constraints is explored. Through the optimization of the length of the gate, contact, and extension regions to balance the parasitic effects, the gate delay can be improved by more than 10% at 11- and 7-nm technology nodes compared with the conventional 0.7 × scaling rule, while the OFF-state leakage current remains below 0.5 μA/μm .

23 March 2015 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Verified
Journal Article
Closed access
GHGage Hills
Gage Hills
JZJie Zhang
Jie Zhang
MSMax Marcel Shulaker
Max Marcel Shulaker
HWHai Wei
Hai Wei
CLChi-Shuen Lee
Chi-Shuen Lee
SMSubhasish Mitra
Subhasish Mitra
Carbon nanotube field-effect transistors (CNFETs) are promising candidates for building energy-efficient digital systems at highly scaled technology nodes. However, carbon nanotubes (CNTs) are inherently subject to variations that reduce circuit yield, increase susceptibility to noise, and severely degrade their anticipated energy and speed benefits. Joint exploration and optimization of CNT processing options and CNFET circuit design are required to overcome this outstanding challenge. Unfortunately, existing approaches for such exploration and optimization are computationally expensive, and mostly rely on trial-and-error-based ad hoc techniques. In this paper, we present a framework that quickly evaluates the impact of CNT variations on circuit delay and noise margin, and systematically explores the large space of CNT processing options to derive optimized CNT processing and CNFET circuit design guidelines. We demonstrate that our framework: 1) runs over 100× faster than existing approaches and 2) accurately identifies the most important CNT processing parameters, together with CNFET circuit design parameters (e.g., for CNFET sizing and standard cell layouts), to minimize the impact of CNT variations on CNFET circuit speed with ≤5% energy cost, while simultaneously meeting circuit-level noise margin and yield constraints.