A hydraulic system is a key subsystem of heavy-duty machine tools with a high failure intensity, the failure of which often causes shutdown of production and economic loss in machining. Therefore, it is necessary to implement failure analysis to identify the weak links of system and improve the reliability. For hydraulic system, there is often an amount of failure data collected in field, which help to calculate the occurrence probability of basic events through fault tree analysis method. However, the data are incomplete and uncertain. To address this issue, this study presents a fault tree analysis methodology. Experts’ opinions are utilized, combined with field data based on the Dempster–Shafer theory and rough set theory to fill the incompleteness and eliminate the uncertainty. For application in a case study, a fault tree of the hydraulic system of heavy-duty machine tools is firstly constructed. Then, the importance analysis is performed to help identify the weak links of hydraulic system. The results show the critical basic events affecting the safety and reliability of a hydraulic system.
In the accelerated degradation test (ADT) of motorized spindles, it is necessary to apply a variety of stresses to simulate real working conditions. However, the traditional accelerated test scheme optimization method does not consider the weight of various stresses in the test, resulting in the evaluation accuracy of important stress parameters in the model being too low. In order to solve this problem, an optimal design method of the step stress accelerated degradation test (SSADT) scheme for motorized spindles is proposed based on -optimality. Firstly, the fault tree analysis (FTA) method is used to analyze the collected fault data of motorized spindles and screen the main stress. Then, the accelerated degradation model is established by using drift Brownian motion. Based on the -optimality, the optimization variables and constraints in the test are determined, and the optimization model is established with the objective of minimizing the estimated variance of the main stress parameters in the acceleration model; additionally, the optimization steps are given. Finally, an example is given to verify the effectiveness of the method. Sensitivity analysis of the optimization results shows that the method has good robustness.
Accurate optimal design for the test plan with limited prior information is impossible since the optimal design method of a three-stress accelerated degradation test plan for a motorized spindle is based on the determination of model parameters. In order to optimize the test plan with poor prior information, a “dynamic” optimal design method is proposed in this article. Firstly, a three-stress accelerated degradation model with a stress coupling term is established based on the correlation of the degradation rate of the motorized spindle, and the parameters in the model are regarded as variables to represent the deviation between the prior information and the true value of the motorized spindle when the prior information is poor. Then, based on the information theory and the sequential design method, an optimal design method of the three-stress accelerated degradation test plan of the motorized spindle with the information entropy as the objective function is proposed to realize the “dynamic” optimization of the test plan. Finally, the usability of the proposed method is verified by taking a Chinese model spindle as an example, and the validity of the method is verified by checking the model accuracy of the accelerated degradation model of the motorized spindle after the test.